r31 25t Posted July 31, 2014 Share Posted July 31, 2014 Just road tuned an rb20det with a kinugawa td06-20g 8cm iwg today. Typical struggle with boost control, but severe porting and flowing of the wastegate seemed to get that under control. Hits the rollers in a month, should be interesting, i can do a comparison with hellaflush7's result! Link to comment https://www.sau.com.au/forums/topic/58229-top-rb20-club-do-you-have-over-260rwkw/page/92/#findComment-7355387 Share on other sites More sharing options...
hellaflush7 Posted July 31, 2014 Share Posted July 31, 2014 when i purchased the setup from the old owner it was running a 38mm gate... don't even bother... hit 1bar at 3900rpm and crept to 1.6bar by redline... the new 45mm gate controls boost perfectly! Link to comment https://www.sau.com.au/forums/topic/58229-top-rb20-club-do-you-have-over-260rwkw/page/92/#findComment-7355705 Share on other sites More sharing options...
Lithium Posted August 1, 2014 Share Posted August 1, 2014 Stock unopened RB20DET out of an R32. Kando TD06-20G 8CM NZ Performance Himount manifold Turbosmart 45mm Gate Bosch ID1000 inj United 107 Raceblend Profec B Spec II 302kw @ 25PSI Could have kept going but Cyl 5 is looking a little tired on the comp test... have backed boost off to 18PSI and she is making 273kw now Awesome result! When is 18psi reached? Is it just a TD06-20G or a TD06SL2 20G? Link to comment https://www.sau.com.au/forums/topic/58229-top-rb20-club-do-you-have-over-260rwkw/page/92/#findComment-7356503 Share on other sites More sharing options...
Lithium Posted August 1, 2014 Share Posted August 1, 2014 Just road tuned an rb20det with a kinugawa td06-20g 8cm iwg today. Typical struggle with boost control, but severe porting and flowing of the wastegate seemed to get that under control. Hits the rollers in a month, should be interesting, i can do a comparison with hellaflush7's result! Same question for you Is it an SL2 20G or actually a straight TD06-20G? Looking forward to results! Link to comment https://www.sau.com.au/forums/topic/58229-top-rb20-club-do-you-have-over-260rwkw/page/92/#findComment-7356504 Share on other sites More sharing options...
hellaflush7 Posted August 4, 2014 Share Posted August 4, 2014 Awesome result! When is 18psi reached? Is it just a TD06-20G or a TD06SL2 20G? Just TD06-20G... hits 20psi by 3950rpm Link to comment https://www.sau.com.au/forums/topic/58229-top-rb20-club-do-you-have-over-260rwkw/page/92/#findComment-7358373 Share on other sites More sharing options...
Roy Posted August 6, 2014 Share Posted August 6, 2014 LOL, another example where the TD06 seems to do a perfectly good job. I dont understand all the fuss over the L2. Hell its smaller than a TD06 and is no more responsive and just ends up with less torque to spin the 20G compressor. TD06 all the way Gutless SR20 owners can stick with their L2s Link to comment https://www.sau.com.au/forums/topic/58229-top-rb20-club-do-you-have-over-260rwkw/page/92/#findComment-7359859 Share on other sites More sharing options...
Lithium Posted August 6, 2014 Share Posted August 6, 2014 Yeah Roy, there definitely seems to be a pattern here. I know FP never used the L2 - they only use the TD06 or TD06H and between that and some of your results I've definitely been taking a bit of notice, the jury isn't out with me yet but I definitely am pondering on it Link to comment https://www.sau.com.au/forums/topic/58229-top-rb20-club-do-you-have-over-260rwkw/page/92/#findComment-7359985 Share on other sites More sharing options...
random1jzmx83 Posted December 7, 2014 Share Posted December 7, 2014 (edited) Not quite 260rwkw but close enough. Rb20det Fmic Hks pod filter Hks 25/30 turbo Turbosmart boost t 3" exhaust Bosch 1000's E85 Made 257rwkw at 19psi Edited December 7, 2014 by random1jzmx83 1 Link to comment https://www.sau.com.au/forums/topic/58229-top-rb20-club-do-you-have-over-260rwkw/page/92/#findComment-7439249 Share on other sites More sharing options...
Roy Posted December 8, 2014 Share Posted December 8, 2014 If only the 2530 could be made to hold onto boost up high then the result could be even better. Still 2 bux 60 from a 2530 is awesome. Imagine it would drive well too! Link to comment https://www.sau.com.au/forums/topic/58229-top-rb20-club-do-you-have-over-260rwkw/page/92/#findComment-7439670 Share on other sites More sharing options...
random1jzmx83 Posted December 9, 2014 Share Posted December 9, 2014 If only the 2530 could be made to hold onto boost up high then the result could be even better. Still 2 bux 60 from a 2530 is awesome. Imagine it would drive well too! Yeah can't complain really. Makes some good power for an old school 25/30 Link to comment https://www.sau.com.au/forums/topic/58229-top-rb20-club-do-you-have-over-260rwkw/page/92/#findComment-7440846 Share on other sites More sharing options...
Wheezy Posted December 30, 2014 Share Posted December 30, 2014 Probably in another thread, but I couldn't find anything. So feel free to redirect me there. Which ID1000's are people using on their RB20? (Part number, original intended applicate etc) I've currently got RX7 555cc Injectors running on an RB26 PFC with resistors inline rather than the GTR resistor pack. I'm guessing besides the spacers? for the (14mm) injectors and new plugs for the loom I'll need to remove the resistors in the loom since RB26 ID1000's seem the go? Link to comment https://www.sau.com.au/forums/topic/58229-top-rb20-club-do-you-have-over-260rwkw/page/92/#findComment-7452557 Share on other sites More sharing options...
Wheezy Posted January 8, 2015 Share Posted January 8, 2015 No takers? Link to comment https://www.sau.com.au/forums/topic/58229-top-rb20-club-do-you-have-over-260rwkw/page/92/#findComment-7457050 Share on other sites More sharing options...
Missileman Posted January 8, 2015 Share Posted January 8, 2015 Not ID1000's but Bosch EV14s http://www.deatschwerks.com/products/fuel-injectors/sport-compact/nissan/skyline/rb20det/1989-94-rb20det Had them in for 12 months, drop in fit, no problems at all, few of my mates have commented how nice my cars idle is. Link to comment https://www.sau.com.au/forums/topic/58229-top-rb20-club-do-you-have-over-260rwkw/page/92/#findComment-7457058 Share on other sites More sharing options...
Roy Posted January 8, 2015 Share Posted January 8, 2015 Probably in another thread, but I couldn't find anything. So feel free to redirect me there. Which ID1000's are people using on their RB20? (Part number, original intended applicate etc) I've currently got RX7 555cc Injectors running on an RB26 PFC with resistors inline rather than the GTR resistor pack. I'm guessing besides the spacers? for the (14mm) injectors and new plugs for the loom I'll need to remove the resistors in the loom since RB26 ID1000's seem the go? I run the GTR resistor pack am running ID1000 GTR injectors. They came as a kit with plugs etc. Seem to think they were 1000.13.04.60.14.6 Just soldered the new plugs onto the loom and kept everything else as per the old Nismo RB26 injectors, R32 AP Eng Power FC and GTR ballast pack Link to comment https://www.sau.com.au/forums/topic/58229-top-rb20-club-do-you-have-over-260rwkw/page/92/#findComment-7457271 Share on other sites More sharing options...
hypergear Posted March 8, 2015 Share Posted March 8, 2015 This is a originally internally gated PU high flowed Rb25det turbo that ended up bolt to a RB20det for a bit fun. It made a not so responsive 283rwkws @ 20psi on E85 fuel. Owner still had fun, here's a short video been sent in: Link to comment https://www.sau.com.au/forums/topic/58229-top-rb20-club-do-you-have-over-260rwkw/page/92/#findComment-7493196 Share on other sites More sharing options...
Wheezy Posted August 16, 2015 Share Posted August 16, 2015 I run the GTR resistor pack am running ID1000 GTR injectors. They came as a kit with plugs etc. Seem to think they were 1000.13.04.60.14.6 Just soldered the new plugs onto the loom and kept everything else as per the old Nismo RB26 injectors, R32 AP Eng Power FC and GTR ballast pack Ended up with these bad boys. http://www.raceworks.com.au/fuel/injectors/bosch-1150cc-4-bar-3-4-length-injector/ Just need to fit the plugs to suit since I had denso injectors. Anyone know the latency settings for Power FC? (RB26 PFC D-Jetro if that helps) Link to comment https://www.sau.com.au/forums/topic/58229-top-rb20-club-do-you-have-over-260rwkw/page/92/#findComment-7588233 Share on other sites More sharing options...
HanBear Posted August 17, 2015 Share Posted August 17, 2015 (edited) I have the same turbo. And i was actually very curious about the power this turbo was capable of. The car is going to be ready to tune this weekend. I'm getting it Dyno tuned on adaptronic with a boost solenoid and no more maf sensor. I'll let you guys know how it goes. R32 gtst Rb20det Godspeed forward facing plenum 550cc injectors Tomei outlet pipe Kakimoto turbo back Stock internals Kinugawa td06 20g 8cm iwg Stock manifold Adaptronic ECU Walbro 255 fp Fmic Edited August 17, 2015 by HanBear Link to comment https://www.sau.com.au/forums/topic/58229-top-rb20-club-do-you-have-over-260rwkw/page/92/#findComment-7589146 Share on other sites More sharing options...
Mayby4 Posted November 3, 2016 Share Posted November 3, 2016 So after having a long read I have good hopes for my build. Plans are: FFP 1000cc injectors E85 Pro spec 2 ebc Tomei fpr Walbro 460 6 boost mid mount Kinagawa TD06H -20G 8cm rear housing 40mm turbosmart wastegate. Stainless exhaust straight pipe Stainless IC piping. Nistune ecu Will be interesting to see if I can crack the 300kw mark, especially considering I want to run 22psi high boost and 17psi low boost. Link to comment https://www.sau.com.au/forums/topic/58229-top-rb20-club-do-you-have-over-260rwkw/page/92/#findComment-7788839 Share on other sites More sharing options...
Roy Posted November 3, 2016 Share Posted November 3, 2016 Dont use the TD06H...go straight TD06. Also...i wouldnt bother with a ffp. Other then that itsca proven 300rwkw setup on E85 Link to comment https://www.sau.com.au/forums/topic/58229-top-rb20-club-do-you-have-over-260rwkw/page/92/#findComment-7788932 Share on other sites More sharing options...
Mayby4 Posted November 3, 2016 Share Posted November 3, 2016 I know the longer runners on the standard manifold work great for a street car with torque lower down being better, But I was hoping for slightly better response from shorter ic piping and lower temps as it is a track only car. and it makes everything so much easier to work on. I assume the TD06H is a no go due to response? Link to comment https://www.sau.com.au/forums/topic/58229-top-rb20-club-do-you-have-over-260rwkw/page/92/#findComment-7789058 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now