Jump to content
SAU Community

Loud click from steering column


silva33
 Share

Recommended Posts

My car has just started to make a loud clicking sound from the steering column when i turn it left and right.. the steering wheels seems to be very tight with no play it is at all.

Does anyone have any idea what this could be? im starting to get worried about it....

thanks

Link to comment
Share on other sites

Is it a four wheel drive? and does it get louder when you turn full lock and accelerate?

If not then see if it does it louder when you are parked and turn the wheel from full left to full right and back again. Does it sound like it is coming from inside the car or outside moreso?

If it's inside then it could be the column itself or the switching mechanism for the indicator. (Have you recently changed a steering wheel or something?)

If it outside the car then check the column coupling where it joins into the rack.

Also check the HICAS sensor under the steering wheel.

Link to comment
Share on other sites

its and R33 GTST and it sounds like it is comming from right behind the steering wheel. i havent really noticed if it is louder stationary or in motion. I have not touched the car or steering wheel at all, but it is quite loud..

Does anyone have any idea of how to check out the steering column? it has an airbag..

Link to comment
Share on other sites

See if it does it gets louder when you are parked and turn the wheel from full left to full right and back again.  

That is the worst bit of advice I have seen in a long time.....

Don't turn your wheels while the car is stationary.

It puts massive load on the power steering pump, and it's not good for your tyres either. :P

My money says it's the indicator switch making the noise. :P

Link to comment
Share on other sites

That is the worst bit of advice I have seen in a long time.....

Don't turn your wheels while the car is stationary.  

It puts massive load on the power steering pump, and it's not good for your tyres either.   :thumbsup:  

My money says it's the indicator switch making the noise.  ;)

Good on ya mate.

It will only hurt the pump if you continuously do it. There is absolutely nothing wrong with doing it once or twice.

I have never seen a pump fail due to this test and it is necessary to determine its location. It also helps by putting the load on the pump as it will amplify any problem that is present. It also rules out any moving components whilst driving.

And in case you didn't notice I am offering help to people here unlike you. I already told him to check the switching device for the indicator so instead of repeating my advice and then flaming bits you know nothing about. Think before you type.

Link to comment
Share on other sites

ok settle guys......hahaha that thread was funny !

anyway erhmmm

i have the same problem .

description;

clickin noise comin from outside from left hand side of car. Definelty outside the car and ft left.

only when u turn the wheel then the nosie is apparent. like a few clicks at time.

the bushes look fine ........so perhaps the column couplin ? hmm

Link to comment
Share on other sites

ok settle guys......hahaha that thread was funny !

anyway erhmmm

i have the same problem .

description;

clickin noise comin from outside from left hand side of car. Definelty outside the car and ft left.

only when u turn the wheel then the nosie is apparent. like a few clicks at time.

the bushes look fine ........so perhaps the column couplin ? hmm

Is it a rapid click or just a few spaced apart. Plus is the noise only apparent when you are moving slowly or does it make when you are doing say 60 around a bend.

Has your car been lowered?

How does it handle, does it drive ok normally? (ie:do you think the noise effects the driveablility of the vehicle?)

Check bearing plates

Check spring saddle

Check steering rack mounting bushes

You should check balljoints but I would doubt these would be the problem, they would knock rather than click.

Link to comment
Share on other sites

  • 1 year later...
Is it a rapid click or just a few spaced apart. Plus is the noise only apparent when you are moving slowly or does it make when you are doing say 60 around a bend.

Has your car been lowered?

How does it handle, does it drive ok normally? (ie:do you think the noise effects the driveablility of the vehicle?)

Check bearing plates

Check spring saddle

Check steering rack mounting bushes

You should check balljoints but I would doubt these would be the problem, they would knock rather than click.

noise happens when stationery and u turn the wheel.

even more loud when u are parked on a road slanting in the gutter. (hence more weight on tyre)

i think its the balljoints...if u move the front left tyre side to side while jacked up and it moves somewhat does this mean the balljoints are worn out?

please assist me in this synopsis.

only under load the clicking comes from the front left.

where and how much do the balljoints cost?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Hey Matt, Link pointed to the 2x IGN power sources from the car as a likely issue, and sure enough pin 31 in the loom does not have power when IGN is on (24 does). So at the ECU, (and this is probably the case for R32 as well as C34) most of the ECU loom goes through the firewall behind the blower motor and there are 2 plugs (of 3 in the junction box) which go up and under the dash, the third plug heads under the carpet to places unknown (likely a body to dash loom joint) So, I started to follow that problem through yesterday. Like Johnny (and R32) I assumed that power was supplied through the 2 connectors near the left headlight so I spent some time pulling the intake etc off and cleaning of 400,000klm of dirt and oil leaks and checking those pins, but there was nothing related to the engine parts or ignition fuses there (and no purple with white trace wire in either side of the connectors) Given that the wire didn't seem to go via the engine bay, I then checked there is continuity from Pin 31 to the second connector to confirm no wiring issue in the ECU loom (it looked likely, given how much that has been hacked up over the years!). The pin marked with the purple dot is the other end of the wire to Pin 31 Then I check for IGN power in the dash loom side of that connector with the key on. Nothing. Given that loom goes up and underneath the top of the dash there is no tracing it without taking the dash out, so I went to the driver's side to see if I can find the other end of that (I'm expecting to get to big body junction boxes after I pull enough apart). However, to get to those functions, I had to pull the covers off the drivers side, I'm pretty sure the problem is in this pic Yep, factory remote start (bottom right), local immobiliser (middle) surrounded by 20 years of butchery. Plan is to totally remove the remote start and immobiliser (I think I will lose remote central locking temporarily as a result) to remove all the suspect stuff given I have other more modern security in the car It's gonna take a while, and it is both cold and uncomfortable out in the shed, not looking forward to it.
    • Hey team,  The clutch on my newly bought 25 swapped r32 feels average and sticks half way. Went to go order a new clutch master but it does not look like the ones that suit the one that’s in the car…    does anyone know what clutch master is this just by looking ?  (The feed is on the side rather than the bottom like the ones the pop up online)  thanks guys new to the RB scene so any help is appreciated cheers !!
    • Id be more than happy to sign up!!! Where do I send the invoices for my fuel usage? I'm happy to provide the mower, oil, and the labour to abuse the motor, just a little help on fuel would be great...   I had tipped the container of oil out into my big "drip tray" and left the small container upside down to drain the oil out of itself overnight. PIcked the container up today, and it has a layer of what feels like either dirt, or shit tonnes of carbon in the bottom of the container. I'm leaning towards it likely being dust, as I doubt the quality of the Sunli BumbleBee having a decent air filter on it, and sections of my yard produce a dust storm, especially because of the high lift blade!   So, filled her up with some fresh Nulon. Seemed to run fine, but it seems to want to run at really high RPM (higher than normal) even with the governor spring slacked off after fire up to try reduce it. If I back the throttle off it a bit to drop the rpm to where I'd like it to be when mowing light grass, it starts to blow a bit of smoke out the exhaust. Opening the throttle back up clears that out. It's definitely breathing oil, as I put my hand down at the breather hose and it's spitting some oil.   My guess is it having been running at high rpm, oil never changed, and it eating dust has destroyed the rings. You know what that means? Time to send it!!!
    • That is what will seal with the bonnet closed. Follow it down while closing the bonnet to see where it ends up with the bonnet closed. The panels don't do anything other than spending money, which this one will do just fine. :p
    • Nah just send me a photo or a drawing and I'll tell you which is better.  It's a new SAU service.
×
×
  • Create New...