Jump to content
SAU Community

Radars and Cameras...:(


Recommended Posts

There's a speed camera on the Entrance Rd on the Central Coast just past The Bay Village shopping centre that has a surveillance camera looking at it. When I first saw it I laughed so hard!!!!! My mates from the coast tell me that it was put there because people continually blew up the speed camera!!!! :)

Apparently 1 day a dude suffered 3rd degree burns when he doused it in petrol, lit it, and the damn thing blew up on him!!! LOL

p.s. is that the one ur talking bout Morgs????

Link to comment
https://www.sau.com.au/forums/topic/5867-radars-and-cameras/#findComment-88876
Share on other sites

Guest heavyside

yeah,

its just messed up, the thing is that the road toll is still the same and yet the revenue created by these camera's has gone up by some ridiculous amount. more people are getting done, but the same amount of people are still dying.

speed doesnt kill, shit driving kills. if everyone learnt to drive properly (myself included) then we would have far less accidents! proper driver education and training is whats needed. like learning how to take control of a skidding car, driving in the wet etc. so many people have no idea how easy it is to get the car aquaplaneing in the wet!!

instead of slowing the speed limits, how about making a 5 lane superhighway where you can just go nuts? like in germany where they have the safer roads than here even though they whizz around at 200ks!

admittedly, we dont have anywhere near the advanced engineering in our cars over here, so the cars themselfs arnt that safe to drive at that speed, but if you want a fast car, then buy one, and dont try and get the old commo to do 160 safely coz it wont happen.

learn your own limits and your cars limits.

thanks guys.

oh, and keep smashin those camera's..

Link to comment
https://www.sau.com.au/forums/topic/5867-radars-and-cameras/#findComment-88883
Share on other sites

He he he, in Canberra, a few young blokes managed to distract and pinch one of the plates off of the speed camera van.

Then they fixed it too their car and ran through the same speed camera spot 17 times going over the limit.

The RTA/cops where very embarrased when the computer system sent out 17 fines through the mail for one of there own speed camera vans.

Not that is funny.....

Link to comment
https://www.sau.com.au/forums/topic/5867-radars-and-cameras/#findComment-88896
Share on other sites

Guest GR33DyMANGO
Originally posted by Jay95R33

He he he, in Canberra, a few young blokes managed to distract and pinch one of the plates off of the speed camera van.

Then they fixed it too their car and ran through the same speed camera spot 17 times going over the limit.

The RTA/cops where very embarrased when the computer system sent out 17 fines through the mail for one of there own speed camera vans.

Not that is funny.....

HAHhaaa... thats FCUKIN' CLASSIC!!!!!!!!

Link to comment
https://www.sau.com.au/forums/topic/5867-radars-and-cameras/#findComment-89114
Share on other sites

:eek: We all know crime doesn't pay, but jeez............... hahahahahahahahaha.................. good one............. yes, it's f***en revenue, and not a accident prevention! There are too many on the road that can't drive properly! The Government are making heaps of money, yet at the same time, half of population are getting worst off!

Graham

Link to comment
https://www.sau.com.au/forums/topic/5867-radars-and-cameras/#findComment-89369
Share on other sites

Well I agree that lowering speed limits isn't going to stop people dying, however I do think that people going and doing outrageous things like that is what brings the law down on us worse. Eg everyone branded with the same label "hoons" or "violent car thugs".

The government in Australia is very knee jerk with its responses to problems. Think about major problems in Australia, Port Arthur massacre and others, rather than researching the best way to prevent it, they mass banned guns. Same thing will happen with everything else. Larger road toll, more radars, lower speed limits etc. It sucks, but when you're trying to stay in power, the general public want something done.

I just wish that all the money that we pay for fines rego etc would actually go towards better roads and a more complete driver training.

Link to comment
https://www.sau.com.au/forums/topic/5867-radars-and-cameras/#findComment-89384
Share on other sites

Guest heavyside

yeah, thats the way with everything the Gov. does.

does something drastic AFTER shyt happens.

the gun banning thing is shyt! if sumone wants a gun, they are going to get it no matter what. the gov. cant stop em, and the black market is gonna grow huge. what if someone come into a place like pt. Arthur and goes nuts again? no one is gonna be able to stop him, coz no one is allowed to have a gun.

if the manager, or bartender had a gun though, then he will be able to do wumthing about it.

75% of the people killed at P.A were shot OUTSIDE the resturant. so imagine if the bartender had a gun, he would have been ALLOWED to save those lives.

fark the Gov and all its shyt policies.

and far out. to those the gov. calles "hoons" you are just making it worse for the rest of us. esp bloody P platers who drive their Daddy's cars and think they own the bloody road. just piss off.

give us a break!

Link to comment
https://www.sau.com.au/forums/topic/5867-radars-and-cameras/#findComment-89966
Share on other sites

Originally posted by deesh

check the ADR rules fpr cars, i think theres some tolerance specified for speedos, like 5 or 10% or something, if they get you for less than that, then you can get off.

thats what makes the 3-4 km/h speedo tolerance even more crap because speedos have a tolerance greater than that on most cars in Australia!

Bracks u aint gettin my vote in 2 weeks buddy!:(

Link to comment
https://www.sau.com.au/forums/topic/5867-radars-and-cameras/#findComment-90952
Share on other sites

Correct me if I am wrong

1/In Canada they have stopped using speed cameras because they sayd that it does nothing to the road toll

2/ A survey was done between two countries. In America they lowered speed limit and they used speed cameras and in a European contry they increased the speed limit and removed cameras. Now over a 10 yr period America had a far higher death rate on the road than the European country. They proved it does not lower the road toll.

Finally I am for speed cameras, but in the correct areas where they where meant to be used. In BLACK SPOT areas where that stretch of road has a high fatality or accident rate. I DO NOT AGAINST they where they are just on a normal stretch of road where there is no chance of being meeting an accident and you are minding your own business. They say the Brisbane to Gold Coast motorway is considered one of the best roads in the world. Now roads in europe with far less quality have higher speed limits. Now why don't they increase the speed to be on par of international standards.

Speed cameras are just a money making for the governament !!

Link to comment
https://www.sau.com.au/forums/topic/5867-radars-and-cameras/#findComment-90971
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • They are what I will be installing. 640s for me.
    • Hmm... From my experience you get about 0.25° camber change per mm of RUCA length change. So, to correct from -2.5 up to less than -1° (or, more than -1° if you look at the world as a mathematician does) then you'd be making 6-8mm of length change on the RUCA. From a stock length of 308mm, that's 2-2.5% difference in RUCA length. My RUCAs are currently very close to stock length - certainly only 2-3mm different from stock. I had to adjust my tension arms by 6mm to minimise the bump steer. That's 6mm out of 210, which is 2.8%. That's a 2.8% change on those, compared to a <1% change on the RUCAs. So the stock geometry already has worse bump steer than is possible - you can improve it even if you don't change the RUCA length. If you lengthen the RUCAs at all, then you will definitely be adding bump steer. Again, with my car, I recently had an unpleasant amount of bump steer, stemming from a number of things that happened one after another without me having an opportunity to correct for them. I only had to change the tension arm lengths by 1mm to minimise the resulting bump steer. (Granted, I also had to dial out a lot of extra toe-in in the rear, and excessive rear toe-in will make bump steer behaviour worse). Relatively tiny little adjustments having been made - the car is now completely different. Was horrifying how much it wanted to steer from the rear on any significant single wheel bump/dip. And it was even bad on expansion joints on long sweepers on freeway entry/exits, which are notionally hitting both rear wheels at the same time. My point is, the crappy Nissan multilink is quite sensitive to these things (unlike the very nice Toyota suspension!). And I think 99.75% of Skyline owners are blissfully ignorant of what they are driving around on. Sadly, it is a non-trivial exercise to set up to measure and correct bump steer. I am happy to show my rig, which involves nasty chunks of wood bolted to the hub, mirrors, lasers, graph paper targets and other horrors. Just in case anyone wants to see how it is done. I'll just have to set it up to take the photos.
    • What do you have in that bad boy ? Ill go with the 725cc since I'll be going with Nistune ( would definitely like more engine protection but Haltech is too far out of reach at the moment... plus, Ill probably have a pretty safe tune as its a daily, not gonna be chasing peak power 24/7 ahahah ). Are Xspurt a safe choice?  Pete's great. He didnt mention anything about traction arm length so I reckon it may be good. When I get some new wheels/tire later down the road I'll ask him about it and get his opinion on em. I heard from Gary that you've got the bilsteins too, are you running the sway bars too? and what other suspension goodies do you have installed or would recommend?
    • In true Gregging style...  
×
×
  • Create New...