Jump to content
SAU Community

4 point Roll Cage? Role cages in general what ya think?

Dragon18

By Dragon18,
in General Automotive Discussion

 Share

Recommended Posts

Dragon18 Rising Star

Dragon18

Posted
Posted

Hay guys i was just talking with afew mates today about roll cages i think its a good idea to have one. well for a 180sx anwayz i was speaking to afew guys they said not alot of room will be in the back and also wanted to ask are they good are they strong. heheh

and apart from rolling you car do they offer a lot of strength on the side e.g if you hit a pole tree etc.

do you need a engering certificate to fit them in and how much do they ussualy cost?

what are your views on putting one in?

let me know what ya think =)

:shake:

Silver-Arrowz Grand Master

Silver-Arrowz

Posted
Posted

I wouldn't bother unless your going to do club races or road rally events. I'n not sure in VIC, but in NSW I think they're no longer legal on road registered cars. And I think you do have to get an engineer to fit a cage.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Looney_Head
      R32 GTS-t RB30 sedan

      By Looney_Head · Posted

      Latest round of updates on the car. I purchased and installed a SWS clutch slipper to help with 60ft times and got some second-hand good condition 275/40R17 Hoosier DR2 radials. Test and tune in November showed the tyres were an upgrade over my over 15 year old mickey Thompson's and I got a 1.8 second 60ft and pb et of 11.71 but even then, that run wasn't great due to rain and driver error (the event got called off 10 minutes later fast forward to the weekend just gone 25th of Jan and there was finally a break in the weather to let racing happen. The first run the track was slippery and only managed a 12.1@129 Second run the track was better and got a new pb et and mph: 11.54@131   Lith and I then worked out that I installed the previously mentioned clutch slipper incorrectly and its never been working, and I had just been dumping the clutch the entire time, we also noticed it was on street boost and not race boost. So I lined up for a third run with the car turned up in the first two gears, but the passengers side axle objected to clutch dumps and left the chat which stopped my weekend.   so there will be another attempt in the future once I replace the tyres as they rubbed and are stuffed now. but a low 11 should be on the cards.
    • GTSBoy
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By GTSBoy · Posted

      Ceramic coating and heat shielding, you mean?
    • joshuaho96
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By joshuaho96 · Posted

      Turbos don't require pulling the motor apart so that's "easier". I would recommend the Nismo R3 turbos instead if you want to do stock twin turbo. It doesn't make as much power as the 2530s but it's only like ~50 whp off the mark and should have better response (ball bearing CHRA, slightly smaller turbo). A local that went with a Garrett G30 and 6boost manifold recently nearly burned his car to the ground after the hood insulator started melting and and burning so if you go single turbo I recommend doing a lot of research and validation work to make sure you don't do the same.
    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      New rear lights, filler panel sprayed, cleaned and back together    before, during, after shots 😍
    • PranK
      My BMW 335i

      By PranK · Posted

      100% is gyprock, I agree. Slip of the keyboard. Haha! I left my indicator bulbs out to save a bit of weight.
×
×
  • Create New...