Jump to content
SAU Community

Recommended Posts

Yeah, look at a GTR next to a Gtst and the differences are obvious... look for the flaired guards, if they have them, its a GTR (unless a wide body kit has been put on it, very expensive and rare).. if no flair guards, then its a gtst...

Also i'm get to see a decent GTR kit on a Gtst.. they just look cheap compared to the real GTR ... don't quite look right... If i had a gtst i wouldn't put a GTR kit on it, there are better kits for the gtst. :P

I've pulled up next to a few gtst's with gtr kits/badges, i look at them shaking my head, but they just look dead ahead, won't look at me, hah!

  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

- brakes are brembo (for r33 and r34)

- r32 brakes are cross drilled (unless they were changed)

if you can get a look inside:-

- front torque split gauge in dash for r32, on centre console for r33

- one piece seats for gtr's with hole in the middle, adjustable headrests for others

- 10k tacho for gtr's only upto 9k i think for others

..there should be some more...

what about if someone had a GTS4 ( me ) and had recorded!! atleast 206 4wkw, then would it be ok the put a GTR badge on the back?

Its down to personal opinion and taste, if you like it and want one, go for it.

But at the end of the day, its not a GTR, so I dont see why people would badge it as one, regardless of how much power it makes...

there is a bright orange R32 GTR cough cough i mean gtst going around where i live with GTR bodykit and the badge on the back, and has the plates GTR - 30. when i was driving behind it i noticed that the rear shocks were different to mine ( gts4 and gtr have same struts ). i then raced him and flogged him, pulled up next to him and he wouldn't even look at me.

OK I don't know if this have ever been bought up before but I have to know..

Why do I see people with GTR badges on GTST's. I see it way to many times, you see a nice skyline start having a look at it and then BAM! it is ruined cause it has this GTR badge on it, IT DOESN'T NEED IT!!! Anyone who knows Skylines knows it's not a GTR and anyone who doesn't know Skylines doesn't know what a GTR is. I know this is a bit of a bitch but can some one please clear this up for me, why do people do this???? Oh and if you are one of the people that does this I am not having a go at you (well not much) I just don't understand it.

I raised this same subject with Nat55 about his gtr badge on his gts-t.

He keeps claiming his car is a gtr. You want an answer to your question? VALIDATION. It is like putting prancing horse on a mustang. These people think every-one around them is so stupid and blind that they cannot see the bullshit. I call it low self esteem. And one more thing, as a owner of a gts-t iam quite insulted by the whole gtr badge on gts-t. My last thread got taken off because Nat55 had a boohoo and could not handle the truth.

Cheers :kick:

what about if someone had a GTS4 ( me ) and had recorded!! atleast 206 4wkw, then would it be ok the put a GTR badge on the back?

It is your choice but I still wouldn't put one on, I would be proud that my GTS4 could keep up with or beat a GTR, it shows you have worked on your car

I read this thread yesterday and it so happened that coming home from soccer a guy asked me if it was an original GTR!

Lucky the guy was playing with us and he's an allrite bloke caus I nearly pissed myself!!

Why on earth would i put a badge on it if it wasnt genuine!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • What can't be done with a little bit of decking board or similar timber bolted to a hub flange via 2 wheel nuts is not worth talking about.
    • I noticed something. On the tps sensor and the sensor behind the adjustment screw is adjusted towards the far left. Are these screws supposed to be centered? (this sensor was in the same position before the tune as well)  Also attached a photo of where my car usually idles at when warm (sometimes a tiny bit above that). I think I might have screwed up the calculation and it might have better than I thought lol at 750rpm still not 650rpm though.      
    • So for both general interest of engine health, and to rule out any coolant/oil issues, I organised an oil analysis done on the 125,000klm oil Results below, all good, just a bit of fuel dilution which I'm not too worried about
    • This is actually a really good way of measuring what wheels fit. If only there was a similar measurement between hub face and suspension :p That said, it's probably pretty simple to actually measure it all with the wheel off the car for the rear. The front is a bit more complex but.. 
    • Being the top Google search result for R34 wheel-related inquiries, lemme throw down my experience. I calculated that 100mm from hub face to wheel face is about the perfect fitment for my ENR34 sedan.  I've been running 18x8.5s, ET35, with a 1" spacer. So, 8.5in to mm = 216mm. 216/2 = 108mm. 108-35 = 73mm. 73+ 25 (1" to mm) = 98mm.  If you wanna get close to this on dif widths, here are the offsets you'll want: 9" - ET around 15mm 9.5" - ET around 20mm 10" - you're crazy, but ET around 30mm All these should fit perfectly on a non-widebody, non-GTR Skyline. Note that it's probably the absolute max, and you're probably better off running a couple degrees of camber in this config, but it looks great, super flush.
×
×
  • Create New...