Jump to content
SAU Community

Recommended Posts

Hi Guys n' Gals;

The dash cover on my 32 GTR has bubbled in the usual place ie the concave right anlged-ish section just above the glovebox. I doubt it can be repaired, does anyone know;

if there's a good dash repairer in Canberra?

how big a job it is to take the dash out of a 32 GTR ie good / bad/ bastard and how long it takes? Searched on the site but found nothing, not looking for a DIY guide unless you happen to have one laying 'round that you prepared earlier, which would be great. The R33 seems firmly in the bastard category from what i gather on the forums and from Adam at BDL but I'm not sure re the 32. I've got the Nissan manual but sometimes the diags etc are so crappy it's hopless.

Regards

Link to comment
https://www.sau.com.au/forums/topic/58887-r32-dash/
Share on other sites

If its just the vinyl on top thats bubbled people have fixed it by getting glue and putting it in a very thin tipped syringe. You then poke the syringe through the vinyl (will leave a tiny weeny little hole u cant even see) and squeeze a bit of the glue in then press the vinyl down. This will re-glue it down, seems to have worked for a few people. Might try it myself, got a small bubble developing on the dash

Link to comment
https://www.sau.com.au/forums/topic/58887-r32-dash/#findComment-1126819
Share on other sites

If its just the vinyl on top thats bubbled people have fixed it by getting glue and putting it in a very thin tipped syringe. You then poke the syringe through the vinyl (will leave a tiny weeny little hole u cant even see) and squeeze a bit of the glue in then press the vinyl down. This will re-glue it down, seems to have worked for a few people. Might try it myself, got a small bubble developing on the dash

Hi Nik;

thought about that too but it's pretty far gone, I think the vinyl has shrunk to the point that it just won't stretch back into place.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/58887-r32-dash/#findComment-1126920
Share on other sites

No dramas dude, just take it easy, take your time, and make sure everything goes back where it came from, i didnt put it all back together properly one time and had a few problems which ended up being something very simple and easy to fix

Link to comment
https://www.sau.com.au/forums/topic/58887-r32-dash/#findComment-1133052
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...