Jump to content
SAU Community

R32 GT-R Fluid & Oil flush.

lwells

By lwells,
in General Maintenance

 Share

Recommended Posts

lwells Grand Master

lwells

Posted
Posted

Hi Guys,

Looking to do some work on the ole R32 GT-R 'zilla over the Christmas --> New Years break. Below is what I plan to do in terms of fluid flushes/changes, along with the fluid/oil.

I was wondering if people can give me an idea of just how much of each oil/fluid I will need for each of the jobs...? Also, recommendations are welcome :cheers::

Gearbox oil - Redline Lightweight Shockproof (~4 litres)

Transfer case oil - Dexron III compliant ATF (~2 litres)

Front Diff oil - ??? (~1 litre)

Back Diff oil - ??? (~1.5 litres)

Brake fluid - Motul DOT 5.1 Brake Fluid (??? litres)

Coolant - ???

Already done:

Power Steering Fluid - Castrol Transmax Z (~1 litre)

Engine Oil - Royal Purple (~7 litres)

Cheers,

Lucien.

Link to comment
https://www.sau.com.au/forums/topic/58968-r32-gt-r-fluid-oil-flush/
Share on other sites
SteveL Mentor

SteveL

Posted
Posted

Do you have a copy if the WS manual ??, all the amounts are given there. 7L for the engine oil ?? supposed to be about 4.5-5 depending on whether the filter is changed or not.

I've been trying to find out about what PS fluid to use - who recommended the Transmax (sounds like auto tranny fluid ??). The stuff recommended in the WS manual has never been available in Australia, apparently.

I use and recommend Penrite products :cheers:

Hi Guys,

Looking to do some work on the ole R32 GT-R 'zilla over the Christmas --> New Years break.  Below is what I plan to do in terms of fluid flushes/changes, along with the fluid/oil.  

I was wondering if people can give me an idea of just how much of each oil/fluid I will need for each of the jobs...?  Also, recommendations are welcome :):

Gearbox oil - Redline Lightweight Shockproof.

Transfer case oil - Redline Lightweight Shockproof.

Front Diff oil - Redline Lightweight Shockproof.

Back Diff oil - Redline Lightweight Shockproof.

Brake fluid - Motul DOT 5.1 Brake Fluid.

Coolant - ???

Already done:

Power Steering Fluid - Castrol Transmax Z (~1l)

Engine Oil - Royal Purple (~7l)

Cheers,

Lucien.

lwells Grand Master

lwells

Posted
  • Author
Posted

Hi SteveL,

I do have a copy of the WS manual, but I find its rather unhelpful, hence I was after people who have changed these oils to get a real idea of what I actually need.

It was a complete engine oil flush and filter change, not just a straight oil bleed + change, hence the rather high usage of oil (it may have been closer to six: I don't have the workshop receipt in front of me :cheers: ).

Transmax Z is a fully synthetic ATF but also explicitly states its designed for power-steering applications. I did a search on here and someone recommended it, so gave it a try. I found it extremely hard to bleed the power steering fluid (as I couldn't jack the car to get to a lead under the reservior), so I had to syphon it out of the top.

LW.

Duncan Grand Master

Duncan

Posted
Posted
Aren't you suppose to use ATF in the transfer case not g/box oil?

:werd: not gear oil in the transfer case

and make sure before you open any drain plugs that you can open the filler plug first :cheers:

GTR V Enthusiast

GTR V

Posted
Posted

Re street use GTR V Spec II & N1 spec

Engine Oil - factory spec 7.5W-30/ 5W-30 5 - 5.3 litres

Manual Trans 75W-90 GL4. 4.1 litres

CastrolVMX is fine or Nissan mission oil BNR34 Special-although REDLINE do

a good oil, expensive.

Transfer prefer Nissanmatic D or can use dexron III 1.8 litres

Attessa Actuator- Gen Nissan Power Steer fluid 2 litres enough to

flush & bleed actuator system.( DON'T USE DEXRON OILS REFER NOTES BELOW)

Power steering (HICAS R32) Gen Nissan Power Steer fluid 2 litres enough

to flush & bleed actuator system.

Front diff .Hypoid gear oil GL-5 80W90 1.3 litres( for modified vehicles be sure it hasn't got front LSD Diff- if yes then use LSD GL5- 80W90)

Rear Diff.Hypoid gear oil LSD GL-5 80W90 1.6litres ( GTR spec 1.3 Litres)

1. Transfer case fluid

Nissan Matic D is strongly requested because high torque is applied to

transfer unit.

2.. Transfer case (ATTESA E-TS-PRO Actuator) : It is not acceptable to use

DEXRON III fluid.

> Only Nissan Power Steering Fluid Special use is required.

Today I received the technical information from our design department.

1. The difference between the DEXRON III and Nissan Power Steering Fluid

Special

The viscosity characteristic of Power Steering Fluid Special is lower than

that of ATF DEXRON III and the resistance to wear is also improved.

Each viscosity is the same level at 100 deg.C and the former viscosity is

designed to have the lower value for under 100 deg.C than the latter

viscosity.

This characteristic is aimed to rotate an oil pump located in ATTESA PRO

actuator easily at the extremely low temperature (Around -30 deg.C or -40

deg.C)

2. What will happen if a customer puts DEXRON II or DEXRON III into the

ATTESA PRO actuator reservoir in the trunk ?

The 4WD performance will be largely decreased at the low temperature

because the viscosity value of DEXRON II or III is extremely high compared

to that of Power Steering Fluid Special ;

As the rising characteristic of 4WD torque transfer becomes worse, it takes

the longer time to transfer the driving torque to the front wheels. There

is a possibility that the 4WD cannot be achieved in the worst case.

Ronin 09 Grand Master

Ronin 09

Posted
Posted

This may or may not be useful - straight out of the Australian delivered GTR32 owner's manual:

Recommended lubricants:

Fuel: Premium unleaded - min octane 95 RON

Engine: API SG 7.5-30 Turbo

Manual transmission: API GL-4 80W-90

Transfer case: Nissan Matic "D"

Power Steering Rack: Dexron II

Cooling System: Nissan LLC (long life coolant)

Brake and Clutch: DOT 4

Capacities:

Fuel: 72L

Coolant: 8.7L

Engine w filter: 4.6L

Engine w/out filter: 4.2L

Power Steering: 1L

:(

GTR V Enthusiast

GTR V

Posted
Posted
 

 

1. Transfer case fluid

 Nissan Matic D is strongly requested because high torque is applied to

transfer unit.

 

2.. Transfer case (ATTESA E-TS-PRO Actuator) : It is not acceptable to use

DEXRON III fluid.

>   Only Nissan Power Steering Fluid Special use is required.

 

Today I received the technical information from our design department.

 

1. The difference between the DEXRON III and Nissan Power Steering Fluid

Special

 

The viscosity characteristic of  Power Steering Fluid Special is lower than

that of ATF DEXRON III and the resistance to wear is also improved.

Each viscosity is the same level at 100 deg.C and the former viscosity is

designed to have the lower value for under 100 deg.C than the latter

viscosity.

This characteristic is aimed to rotate an oil pump located in ATTESA PRO

actuator easily at the extremely low temperature (Around -30 deg.C or -40

deg.C)

 

2. What will happen if a customer puts DEXRON II or DEXRON III into the

ATTESA PRO actuator reservoir in the trunk ?

 

The 4WD performance will be largely decreased at the low temperature

because the viscosity value of DEXRON II or III is extremely high compared

to that of  Power Steering Fluid Special ;

As the rising characteristic of 4WD torque transfer becomes worse, it takes

the longer time to transfer the driving torque to the front wheels. There

is a possibility that the 4WD cannot be achieved in the worst case.

Please read

GTR V

lwells Grand Master

lwells

Posted
  • Author
Posted

GTR V: I fail to see how posting the same thing twice is of any great help.

I don't want to use Nissan OEM fluids. I know Matic D is an ATF fluid, which would suggest that ATF should be used in the transfer case and not straight gear oil. Is that the point your trying to make?

LW.

Dash Enthusiast

Dash

Posted
Posted

I think the the point he is trying to make is even though dont want to, its recommended to

use Nissanmatic D.

I'm sure people have used non nissan spec ATF before.

Then again theres probably a couple running around with shockproof in the transfer case

aswell!

I'm gonna do my soon, let us know if you find a better alternative.

Duncan Grand Master

Duncan

Posted
Posted

yeah we run non nissan spec ATF.

No offence to redline but are they aware of how the gtr transfer case works or are they just guessing? It apparently very similar to an auto trans and does run the same fluid.

Hopefully someone has some exact numbers, but ATF is considerably thicker than regular gear oil, and is often used by the shonkey dealer to hide gearbox problems.

wrxhoon Grand Master

wrxhoon

Posted
Posted
yeah we run non nissan spec ATF.

No offence to redline but are they aware of how the gtr transfer case works or are they just guessing? It apparently very similar to an auto trans and does run the same fluid.

Hopefully someone has some exact numbers, but ATF is considerably thicker than regular gear oil, and is often used by the shonkey dealer to hide gearbox problems.

You must use atf ( dextron 3 ) in the transfer case , it holds just under 2 lts from memory fill to the filler hole ( until it runs out ).

Duncan the atf oil is thinner that gear oil .

Use gear oil; in the g/box 75-90 .

You can use lsd diff oil in both diffs , you cant use non lsd oil in lsd diffs .

lwells Grand Master

lwells

Posted
  • Author
Posted

Ok, so basically we have established Redline has no idea: glad I asked because a couple of people seem to have followed Redline's suggestions.....

So scratch Lightweight Shockproof for the transfer case (which is good, since it costs the earth). Does anyone have specific recommendations for a transfer case oil? Likewise for the diff oils? As I understand it the R32 GT-R runs an open front and mechanical rear diff: will the same oil be OK?

Cheers,

Lucien.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Wazmond
      Stock rb25det neo questions

      By Wazmond · Posted

      Hows your intake piping? Are you still running stock? Having in the stock AFM position would mean, if the BOV was shut/venting out, it'd create the almost stalling kind of effect right // "the rich pulse behaviour" due to MAF thinking air is flowing ? But this would be better than having the bov in the stock position + MAF on/just before cross over piping right?
    • GTSBoy
      Stock rb25det neo questions

      By GTSBoy · Posted

      Essentially, yes. Although I wouldn't put the AFM on the crossover pipe. I'd want to put it into what amounts to the correct size tube, which is more easily done in the intercooler pipework. I bought a mount tube for card stile AFM that replaces the stock AFM - although being a cheap AliExpress knockoff, it had not flange and I had to make and weld my own. But it is the same length and diameter as the stock RB AFM, goes on my airbox, etc etc. I don't have a sick enough rig to warrant anything different, and the swap will take 5 minutes (when I finally get around to it and the injectors & the dyno tune).
    • Wazmond
      Stock rb25det neo questions

      By Wazmond · Posted

      So to summarise, the best thing to do is to move recirc to between turbo and IC, and maf on the crossover pipe. Meaning I'd need a recirc flange, drill a hole in the piping on turbo outlet area. And drill hole on crossover to fit/weld maf sensor? Either that or put the MAF on the turbo inlet right?  Is an aftermarket recirc/blowoff valve recommended? Do currently have family in Japan so could probably bring something back with maybe a cheeky lil SuperAutobacs run?
    • tsuokun
      Lets play a game - What is causing my oil consumption?

      By tsuokun · Posted

      Yep, so far most have said that it looks like corrosion on the wall from piston not moving. Which then has probably damaged the oil rings and caused those vertical marks. The longest the engine was still after the rebuild, was the winter of 2018 - 2019, plus the boat trip to Japan. When I shipped the car, it had normal gas in the tank but before that winter pause, it had E85 in tank.  In any case, even if either one of those was the cause, it happened close to 6 years ago and the car has been driven something like 30 000kms after the fact. Again, apart from the plugs and the dip stick, there is nothing in the way the car runs that would indicate what has been going on in the engine. I am going to consult a shop and ask their opinion, what would be the best approach. I do have some access to a garage I could use to diagnose further myself, but time is very restrictive. Might end up buying another engine that could be used while this one is being remedied. Without pulling the head, it will be impossible to find out if it needs another bore, but here's to hoping a hone would suffice.  Goddamnit, I would really have preferred this not happening.  
    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      Boot is going to be replaced eventually. I just wire brushed what I could and rust converted. Then painted in rust kill primer. the spoiler also got repainted and plugs replaced on the ends. The under side of the bonnet is going to be black also, currently white. But red on the top side, same colour code as the silo to begin.
×
×
  • Create New...