GTS-T Boost Levels

[r0ma]

Hey guys,

Just got the boost controller installed. (R33 GTS-T)

just went with a GFB's System...

what i want to do now is.. remove the 'dual boost' / when the boost jumps up at 4,500RPM.

i dont know the exact term for it so i couldent find anything under searching, etc.

i want to run a certain boost level right up the rev range. instead of it jumping up 2psi @ 4500

im sure its been covered before? so if some one can give me some advice or point me to the right link?

cheers

[INASNT]

Is it the GFB bleeder?

Even if not, once you disconnect the stock solenoid you wont get the 2 stage boost effect with the new controller

[r0ma]

Ya it is...

i still have the 2 stage active tho..?

what do i need to disconect? it still goes into the soledoin.

one sec i am getting a pic of how i have it set-up.

[nitemare5]

disconnect the standard solenoid all together.

[r0ma]

disconnect the standard solenoid all together.

and where do i re-dirrect the hoeses? both top and bottom?

i have a pic of my set-up if you want it emailed..

[DezertEagle]

Run one hose from your intake piping to your wastegate.

Cut this somewhere and put the bleeder in there.

[r0ma]

Run one hose from your intake piping to your wastegate.

Cut this somewhere and put the bleeder in there.

hey mate.. havent put the haet shield on yet.. get the cooler tomorow.. cant wait..

ive got a GFB..bleeder.. its got 2 conectors.. IN and OUT

on the engine there is.. a hole in the Plenum pipe. a hole from the turbo solenoid. and a hole on the plumb back hose.

ive got hose/t pieces.. can connect any thing every where..

so.. where do i start? the instructions that came with the device are pretty brief and arnt designed for spesific cars.

[r0ma]

got it sorted. cheers guys.

hey mate.. havent put the haet shield on yet.. get the cooler tomorow.. cant wait..

ive got a GFB..bleeder.. its got 2 conectors.. IN and OUT

on the engine there is.. a hole in the Plenum pipe. a hole from the turbo solenoid. and a hole on the plumb back hose.

ive got hose/t pieces.. can connect any thing every where..

so.. where do i start? the instructions that came with the device are pretty brief and arnt designed for spesific cars.