Jump to content
SAU Community

Recommended Posts

ok i'm tossing up between the r33 and r32, did some research on the r33's, now for the r32's, i was wondering what kinda power figures and quarter mile times a lightly modded r32 is capable of?

mods would include, pod, front mount, full exhaust, and a tune, and boosted on the standard turbo, a few ppl have been telling me that the rb20's in standard trim dont have much torque, would this kinda of set up help much with the torque issue? cause i like my cars with some torque and if the r32's dont fill my needs then i'll just spend a bit more and get the r33, will be waiting for ur advice guys, thanks

Link to comment
https://www.sau.com.au/forums/topic/59283-info-on-lightly-modded-r32s/
Share on other sites

RB20's have no torque (compared with a RB25). I went with a R32 because it looks better.

Generally speaking Skylines are very robust performance cars, I guess the thing to look out for it the condition of the car (seats, carpet, steering wheel, how the gearbox feels, how dirty the motor is, how it sounds, window and door seals etc...)

yeah,i know an importer that would sell an r32 gtst w pod,hks ssqv,coilovers,r33 gtR buckets,75000ks...the one with the sunroof,also got a veilside front bar, new midnight blue paintjob and r32 gtr rims for 13,you know,for that price,youd save alot off the r33s price already,spend the difference,unless alot of bodywork done,r33s jus commodore anyway

everyone knows an importer or a friend of a friend who sells R32 for that price, but the reality is that there are costs involved in getting a car complied and on the road...

For a decent R32, you are looking at spending at least 15k.

nemz: don't mean to offend - this may be a bargain R32, but I have just seen so many similar posts - but have never seen a decent R32 for under 15.

Things to look out for: check windows, check wheel arches for rust, service history, interior condition, rubber in wheel arches (burnouts)...

Have a full mechanical insspection done including compression test!

they are 89 models though,the only problem i had was stock bov leaking boost back through plumbback,got a new one and its running fine,i really diddnt know i could get such a good example for 11,3,gave me a kakimoto exhaust 3" all the way,even had coloured drink holders lol

When i first got my R32 i did some basic mods(ehxaust, intercooler, boost and tune) which it made 190 rwkw, and ran 12.9 @117 mph on street 17" tyres. The mods didnt cost much at all ( around $1500) and left me with a close to stock 12 sec street car.

well either way dude,im not here to criticise you,nor you me,its beside the point,im sure there are alot of rip offs out there,maby the clock was wound back,but its still got original timing belt,the water pump dosent need changing,lets say it did ....whats an average for aussie conditions...18oooks a year x 15 years,thats 220,000 ks or so,what turbo engine would be running perfect after that? and if it has done over 150ooo ks im happy its running the way it is,for 11000 youd expect things to stuff up,ive had it for a year now and the only problem was that bov.

i've been looking around and its true that r32's in decent nick are really hard to find for under 15g, i've been looking at both the r32 and 33 and the r33 only seems to be a few more grand, not that much difference

on another note, about the km's issue, if its got an aftermarket speedo with the 180km plus speedo, this wouldnt be the correct km's reading right? it would be the reading from when the new speedo was put it?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Some of them keep working fine. 9 out of 10 of them end up causing an absolute misery bleeding the system and get thrown on the workshop floor in a tantrum and never thought about again because they were never really needed and just added crap to the car that we could have done without. Same-same with HICAS, A-LSD, and various other stupidities that over eager 10x engineers thought we had to have.
    • Not required but appreciated. Super Coppermix Twin even the non-competition model feels like the pedal is noticeably heavier than stock which was pretty well judged IMO. I'll be swapping in the Nismo operating cylinder soon to see how that feels.  Personally I haven't felt anything that justifies replacing the damping loop, at least compared to more modern stuff where the clutch delay valve is actually quite noticeable.
    • He made that comment in my thread - In my case the vents ARE to lower engine heat, when the car is not moving, which is the only scenario I have heat problems with the aircon on, sitting in traffic, on 40C+ days. I can't imagine a scenario that this NC needs any at this point in time. I do not know if it will actually make my cooling when the car is MOVING worse, and I sincerely hope that won't be the case. If it does, well, um, f**k.
    • Nice, thanks. Thats why I was asking, there'd been a fair bit of discussion in the E90 world about vents and where it makes sense to put one (ie, over the filters is not great as that is inline or slightly behind the struts and in higher pressure area). I struggle with air flow and pressures. It sill weirds me out that a radiator in the boot can work. 
    • Neither really Vents, when located in the right place, will lower the engine bay "pressure", as air has a path to escape, thus lowering the engine bay pressure, thus.....improving the efficiency on the coolant stack (read: IC, condenser, radiator) This is why the Blits vented bonnet on my 33 worked so well, the vent was in the front 1/3 of the bonnet, which put it right after the radiator  If the vents are to far back toward the windscreen, which is a high pressure zone, it can actually force air into the engine bay, causing higher pressure and effectively loosing efficiency on the cooling stack, like the fab of raising the rear of the bonnet, which does allow heat to escape, but only when the car isn't moving  There's heaps of cool "fluid dynamics" info out there, but, I'll attach a video of a 'Merican joint that focuses on "Miatas" as I found it when looking into vents for mine, they explain it way better than me  
×
×
  • Create New...