Jump to content
SAU Community

Recommended Posts

Gday Guys,

My Importer has suggested that I try to get my car on the ship now (it is loading) but I have not as yet even sent away the forms for import approval.

Has anyone done this?

He says worst case scenario it will sit on dock in aus until it's approved. And he says they HAVE to approve it since it is a 15 + y/o car.

Anyone KNOW (please don't guess...I need fact) if it is safe to do this?

On the import approval request form, at the bottom it states...

"If you have chosen to ship your vehicle before receiving an import approval,should your vehicle arrive before the application is processed, an approval cannot be issued"

That says to me, if it lands before we get approval, I wont EVER get the car?

The other option is I wait 1.5 months or however long the round trip is for the boat. (Kiwi)

Cheers

Chris

I think you have answered your own question from what you've read off the bottom of the form. Look to be honest this is not the place to ask this question. RING DOTARS and ask them for a 'proper' answer. Is your car a december build or January or what? Either way the only persons advice i'd trust on this point is the people enforcing the relevant legislation (in this case DOTARS - AVS).

Richard

mmmgtir is on the money, ring dotars.

*personally* ive seen many a car be loaded before its been approved and everything worked out OK.. but then again i've also heard they can roll your car off the back of the boat and into the sea if it cant be imported....? hopefully not true.

I did a import approval on a vehicle that turned up early and put current place of vehicle "Fremantle" I wont go into why we can do this as it is legend as much as rumour, but we dont normaly do it. DOTRS are help full if you dont just put it on and get the approval at a later date.

It cost's $18 to $20 a day in storage if you have delays in getting the import approval one guy had to pay $2,000 in fees.

Wait for the De Reg if it is 15 year old and a RAW should be able to do a import approval with out the De Reg.

I would wait. My company wouldnt actually load it without the approval anyway. The guy who was doing my clearing at this end said absolutely do not do it even if you have the option to as it the costs and hassle incurred at this end if it doesnt work out such as storage, maybe even disposal. Not worth the risk IMO.

My Importer has suggested that I try to get my car on the ship now (it is loading) but I have not as yet even sent away the forms for import approval.

My car went on the boat before I received import approval and that caused me some stress, believe me :), but it turned out allright in the end.

I doubt you'd be up for much more than extra storage costs.....this is a direct quote from VSB 10 "Importing Vehicles to Australia" on the DOTARS web site:

"An Import Approval must be obtained for a vehicle to gain clearance at its point of entry to Australia. Vehicles that arrive in Australia without an import approval will incur storage costs until an import approval is issued.

It is strongly recommended that you do not ship your vehicle to Australia until such time as you are issued with an Import Approval. If you do ship your vehicle before receiving an approval and your vehicle arrives before the application is processed, you will incur storage costs."

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’m doing some side developments on SR20det S13 engines, its one my hobby cars used it to compare flow capacity of some smaller size wheels. SR20det is one of another JDM legendary engines I'm sure there are plenty of SR enthusiasts on this forum, I will share results some common turbo configurations here. a quick run down of what the car is: Wide body 180sx Type X with black top engine (blue). It has: Stock bottom end Haltech 1500 ECU 5-0 motorsports trigger kit Kelford SR20DET Beehive Spring with Titanium Retainers Kelford Cams SR20DET S13 188-B 268/272 Cams G25-660 Turbocharger in T2 .64 rear housing internally gated ARP Head studs MLS head gasket 1000CC ID injectors Walbro 450L Fuel pump Front mount cooler kit JJR’s 3 inches turbo back exhaust (its too short for the 180sx it had to be extended) Pump 98 fuel Hub Dyno tune So far made 270rwkws at 22psi full boost by 4500RPM. Engine is very knock limited hence a pretty bad looking top end. From previous experiences it seems like SR20dets are happier with bigger size turbine, some thing like a GT30 would make way better top end, but on same time response is lost. It won't be a problem with S15 VCT engines. I'll be testing alternative turbine housing, turbine wheel and possibly dump pipe options for extra flow to resolve the problem and of course E85 would resolve all the issues.            
    • Awesome writeup and details. Thanks for sharing the story so far. I can relate to parts of it with my previous car and some of the issues I had to deal with.
    • Wow the colour matched hard top completely transforms the car. Are there any nice front lip options for the car or is that off the table?
    • Generally yes but for some reason I've been ruthless this time around!  I might even need to do another tip run after the way I've finally been able to hit the delete button on shit I've stepped over, stepped around and tripped over for the past 10 years!
    • I just quote the Rolling Stones. Paint it black.
×
×
  • Create New...