Jump to content
SAU Community

Recommended Posts

I need help guys!!

I've just purchased an ER34 RB25DE NEO. I found this in the car, which no one I spoke to are able to explain to me what the heck this thing is and how to shut the light off.

Could some one tell me about this item?

Refer to the bottom right of the bigger picture for the location of the detailed picture.

http://users.tpg.com.au/topspeed/Big.JPG

http://users.tpg.com.au/topspeed/Detail.JPG

I am guessing it is a service indicator light for the car, but what is it supposed to indicated? That it was serviced on 1000km and 5000km when it was first purchased?

Link to comment
https://www.sau.com.au/forums/topic/59530-help-on-r34-id/
Share on other sites

Yeah, of all the R34 I've seen that thing don't exist. I wonder if it's wise to remove them..... coz it's kinda pointless to have that on, since the car is already over the 5000km.

Perhaps not. It could be when the light comes on at 5000km, the idea is to remind the driver the car is due for an oil and filter change/service, and a reset button may then be pushed once the service is complete - thus resetting an internal counter, wired to the odometer, which will count until another 5000km is clocked up, at which time the light comes on again. I like it. It would be an accurate way to know when the car is due for a service rather than letting it go for a few 100km over. Then again I could be just making sh!t up here :) but it's definitely an aftermarket device, I've not seen one before. Kinda cool.. :)

Link to comment
https://www.sau.com.au/forums/topic/59530-help-on-r34-id/#findComment-1138325
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • yeah i agree paint match stops it from standing out so much, oh that's actually really good to know i was wondering if it would help with air flow now actually having an outlet in the bonnet. Will have to focus on ducting into and out of the radiator now to make the most of it.
    • I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
×
×
  • Create New...