Jump to content
SAU Community

if you owned my car what would u do next??

OohArrGTR

By OohArrGTR,
in Engines & Forced Induction

 Share

Recommended Posts

OohArrGTR Experienced

OohArrGTR

Posted
Posted

Hey, i have a basically stock R32 GTR..

full exhuast with front pipes..

impul modded stock ecu.. no idea to what extent..

aftermarket airfilters..

i have just purchased some R34 GTr N1 turbos..

My plans were to get a Boost Controller straight away... EVC 5 probably ?? good ??

and what do you think i should do next.. im on a limited budget but i want to get maximium performance and realiability for minimal cost..

thanks people..

these what i was thinking.. whats your thoughts wouldnt come at once but would they be wise??

HKS Cams 265 in and out ? sound right?

Power FC

Nismo AFMS ?? cost $$???

cam gears ??

Bosch 044??

Front Mount?? hopefully a trust one ??

injectors 600cc??

thanks heaps!

7heavn Experienced

7heavn

Posted
Posted

get those N1's on there make sure before you do that you can afford a set of nice aftermarket dump pipes and bolt them up at the same time as the turbo swap. Other then that I would be looking at installing a pfc and cam gears and looking for a good tuner .

Shouldn't have to worry to much about your afm's if you keep it under 300kw@wheels if you want to go close or more you will have to upgrade your fuel system as well .

Mr GTS4 Mentor

Mr GTS4

Posted
Posted

i think it would be better to go for a AVCR with the POWER FC. with the afm's you could use 2x rb20 ones. you can use the standard cooler upto 300kw so i wouldn't worry about it for now. then i would go for fuel pump ( bosch, walbro or nismo, probably one of the other two to keep cost down) and injectors ( 600cc sounds good ). as GTRman1992 said an oil cooler would be a good investment if you intend on going to some track days. sounds like you going to have some fun on this project!!! :D i would ;)

OohArrGTR Experienced

OohArrGTR

Posted
  • Author
Posted

great Question Kill HSV!!! yeah i was planning to do a compression test before the turbos go on if all good will put them on if not oh well.. will just have to rebuilt it i guess.. or save for one!! anyone else know much about the differences between avcr and Evc5 ??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Sean'O
      3D printing fun

      By Sean'O · Posted

      Howdy friends, So another weird one today, I was looking into replacing some broken clips holding the front grille for the R32 GTR (part number 01553-03831), and noticed the brackets which are supposed to hold the grille in place were also missing 😑. I do recall seeing this issue many years ago, but didn't fix it at the time. A quick look on eBay and I was able to find the genuine brackets, along with all the screws which suited the headlights (part numbers 26042-08U05,26092-08U05). Happy days!....  Once they arrived however there was an extra nut in the packaging which implied that there should also be a bolt or a stud, and sure enough, after a bit of searching I found this thread from 2013, and @Ants clearly shows a stud should be present. Reading around a bit more, it's possible the headlights on my car are the "povo pack" headlights as mentioned by @funkymonkey in this thread way back in 2008. This could explain why the studs are missing on my set of headlights. Looking at the headlight diagram I wasn't able to see a suitable part number for the stud itself. The headlight did indeed have a recess that looked like it would accept a stud, but interestingly no thread or anything obvious how the stud would be affixed to the headlight, I suspect it may have been glued in, press fit, or melted into the plastic at the factory. Another member may be able to clarify if they happen to have a genuine set of N1 headlamps. The only thing we have to work with within the recess is a keyway which likely is there to prevent the stud from rotating within the recess. In any case, back to 3D printing, I put together a model which acts like a pug with a friction fit inside this recess, making use of the keyway so it doesn't rotate while tightening a bolt. Printing in TPU will allow it to slightly swell making a nice snug fit without cracking the part. I've designed the adaptor it to accept an 20 mm M6 bolt (stainless with a cap head in my case), as opposed to the standard M5 stud and I made use of the standard galvanised split washer that came with the genuine brackets from Nissan. Once the bolt and screws were all in place, giving the bracket a gentle shake gave the classic "shaking the car" feeling, very solid, which gives me confidence this is going to be able to hold on much better than the janky solution which seems to have been here for the past decade or so. Overall I'm really pleased with how this turned out and maybe there are more people out there running these headlights without a centre stud at all! Link to the freely available model on Printables: Click here Regards, Sean  
    • GabsReDeal
      R32 GTS (RB20DE) clogged cat

      By GabsReDeal · Posted

      Hey everyone, This is my first post apart of the introduction. I tried searching a bit on the forum but couldn't really get a straight answer. I got the car to my mechanic as I felt it being weak. It seems that it was missing on two cylinders due to the injectors. I had all my injectors clean and the car runs much better. The mechanic also confirmed my suspicions that the cat is clogged and needs to be tackled asap. The cat rattles a bit and the hot exhaust warning frequently lights up when driving after getting the injectors clean. In my introduction I was asked about what modification I might be interested in and mentioned a cat delete. From what I was told, this is not really beneficial on the RB20DE and there are more cons than pros.  Could perhaps anyone give some suggestions on what the best course of action would be since the current cat is toast and needs to be removed/replaced anyway? I can also sometimes smell a strong smell of fuel, but I'm not sure if this is related.
    • Milkmun
      NC MX5

      By Milkmun · Posted

      Hope the cans went down well at least 
    • Milkmun
      Neil's R33 Gts-t Build

      By Milkmun · Posted

      255 can't go wrong with the price.
    • Kinkstaah
      Neil's R33 Gts-t Build

      By Kinkstaah · Posted

      When I was replacing my pump due to being stranded in the wrong state, I went with the Deatschwerks 320lph kit. It is a direct plug in to the stock wires, harness, everything. It comes with a plug... but you can plug the OEM plug directly into this thing. https://justjap.com/products/deatschwerks-dw300-fuel-pump-nissan-s13-silvia-r32-r33-r34-skyline-c34-stagea?currency=AUD Downside: Won't actually flow that much on boost if you want to push it on E85, but it's comparable to the 040/255 etc. Little more actually.
×
×
  • Create New...