Jump to content
SAU Community

Recommended Posts

WSID (Western Sydney) is $45, $5 of which goes into a prize pool for the best 3 reaction times of the night (and also another pool for anyone that gets a 0.000 R/Time).

When busy you'd get a solid 5 runs however over the last 3mths you'd easily get 10 runs in a 5hr session (Wednesday nite).

Calder Park charge $55 -generally you can only get a few runs in because it's always PACKED.

Drift sessions - $100

Open practice - $165

Heathcote (drags) costs around $40 (depending on the size of the group, or type of meet)

IIRC, at AIR (adelaide) on a weeknight 4,6 & rotary meets its $35, and then $50 on the weekends. The two times ive been Ive been able to get 10 runs, and plenty more if I wanted to. Kinda sux when you have cops camping out the front gates on drift meets tho..

just a question because some venus may not have insurance for people on thier p's you must admit it is a bigger risk for a p plater to go down the 1/4 than an open licenced driver

I don't agree with the "Bigger Risk Between p's and opens"... So your saying that some one with a P's who is 23 and has been driving a skyline for 3 - 4 years and had more experience, compared to some one with an Opens, who has only had the car a month and no experience. It seems as though you are biased against P's going down the track ? why is that? and what is the whole point of this thread in the first place ?

no definatly not i am looking at the insurance companys point of view they see some one who has had thier licence for 10 years and no accidents and they lower thier preimums. As oposed to some one who has driven a car for 1-2-3 or 4 years haveing not had much experince behind the wheel thier insurance is higher it is just pure fact

Hence the thought of if you owend a drag strip and had it open to every one your insurance would be higher. As oposed to haveing every one with thier open licence could race on the track and p platers were banned thier insurance would be lower

this situation could happen in the next year i personaly hope it dosent it will kill 1/3 of the sport (i new this would get some peoples backs up but you cant keep every one happy)

and if you dont like the thread dont reply to it . Geting the prices for every drag track in oz and seeing what value for money you get from track to track maby some one from NSW pays 50 bucks for 4 runs while some one from VIC pays 50 bucks and runs all day the person from NSW can put to the track opperator thier complaint about being ripped off

or dont you like money

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hows your intake piping? Are you still running stock? Having in the stock AFM position would mean, if the BOV was shut/venting out, it'd create the almost stalling kind of effect right // "the rich pulse behaviour" due to MAF thinking air is flowing ? But this would be better than having the bov in the stock position + MAF on/just before cross over piping right?
    • Essentially, yes. Although I wouldn't put the AFM on the crossover pipe. I'd want to put it into what amounts to the correct size tube, which is more easily done in the intercooler pipework. I bought a mount tube for card stile AFM that replaces the stock AFM - although being a cheap AliExpress knockoff, it had not flange and I had to make and weld my own. But it is the same length and diameter as the stock RB AFM, goes on my airbox, etc etc. I don't have a sick enough rig to warrant anything different, and the swap will take 5 minutes (when I finally get around to it and the injectors & the dyno tune).
    • So to summarise, the best thing to do is to move recirc to between turbo and IC, and maf on the crossover pipe. Meaning I'd need a recirc flange, drill a hole in the piping on turbo outlet area. And drill hole on crossover to fit/weld maf sensor? Either that or put the MAF on the turbo inlet right?  Is an aftermarket recirc/blowoff valve recommended? Do currently have family in Japan so could probably bring something back with maybe a cheeky lil SuperAutobacs run?
    • Yep, so far most have said that it looks like corrosion on the wall from piston not moving. Which then has probably damaged the oil rings and caused those vertical marks. The longest the engine was still after the rebuild, was the winter of 2018 - 2019, plus the boat trip to Japan. When I shipped the car, it had normal gas in the tank but before that winter pause, it had E85 in tank.  In any case, even if either one of those was the cause, it happened close to 6 years ago and the car has been driven something like 30 000kms after the fact. Again, apart from the plugs and the dip stick, there is nothing in the way the car runs that would indicate what has been going on in the engine. I am going to consult a shop and ask their opinion, what would be the best approach. I do have some access to a garage I could use to diagnose further myself, but time is very restrictive. Might end up buying another engine that could be used while this one is being remedied. Without pulling the head, it will be impossible to find out if it needs another bore, but here's to hoping a hone would suffice.  Goddamnit, I would really have preferred this not happening.  
    • Boot is going to be replaced eventually. I just wire brushed what I could and rust converted. Then painted in rust kill primer. the spoiler also got repainted and plugs replaced on the ends. The under side of the bonnet is going to be black also, currently white. But red on the top side, same colour code as the silo to begin.
×
×
  • Create New...