GTR Water Pump

[GTRman1992]

Does anyone have an old water pump. I don't care if it leaks out the bearing seals as long as the gasket surface is ok. I have bought a Davies Craig electric water pump and need to pull the guts out of the standard pump and weld up the hole. I just don't feel like destroying my pump as it is less than 2 years old.

Thanks.

[V8skylineMAN]

any RB pump should fit....it doesent necessarily have to be a gt-r pump....basically you just want a housing.....

what about making a blanking plate up.....custom look?

[GTRman1992]

I thought about the blanking plate, but that would restrict the water flow as the pump is 1/2 the water gallery if you know what I mean. I figure with the pump housing their I won't be restricting water flow.

[V8skylineMAN]

would all depend on how you built it...i mean if you are running the electric pump from the housing(in line) then yes it would make a difference...but if you position the holes in a position that basicaly make the pump the gallery.....meh ...lot of furkin about......I'D do it...but thats me.......i like to make things.

there would be no benefit to it over the way your doing it.

exept mayby 500g of weight reduction ...lol

[strutto]

exept mayby 500g of weight reduction ...lol

Custom fabricate a pump housing or take a sh1t...

Hrmmm, I know what I'D do...

[V8skylineMAN]

pump houseing would require less effort

[GTRman1992]

So does anyone have one ?

[GTRman1992]

Anyone at all, don't be shy.