Jump to content
SAU Community

Engine conversion... I know this sounds a bit stupid...

Hellboy

By Hellboy,
in General Automotive Discussion

 Share

Recommended Posts

Hellboy Rookie

Hellboy

Posted
Posted

Hi guys! I'm new here but I've been reading quite a lot before I registered as a member and learnt so many things. (Well considering that I know nothing at the beginning...)

Anyways, here's my questions. I often hear people talking about transplanting a RB26DETT into their GTS-T. But can you actually replace a RB26DETT in a GTR with a RB25DET engine. I know this sounds a bit weird but really I have no idea about this. Just curious. Can anyone help me here? Thanks!

deano_82 Collaborator

deano_82

Posted
Posted

wow good idea........... you should really do it no do it... bacardi and cola do it doit

why would you bother wondering about this! why not put a twin spark ca20 in there or a diesel hilux motor!

do it do it

sorry man just in shiat mood, but yeh prolly would go in easily, but no one will ever know!

Kaido_RR Grand Master

Kaido_RR

Posted
Posted

yes it can be done, there is a race built r32 gtr in perth running a rb25 block and rb26 head (i belived he damage his block and swap to the 25 after that happen)

the reason why people dont do it cuz the rb26dett is a much better and suited engine for the gtr

Warpspeed Experienced

Warpspeed

Posted
Posted

Anything is possible, but.....

The 4WD blocks are different to RWD blocks. The 4WD has the front diff mounted in the sump, and the sump and oil pan rails are further apart and quite different on the 4WD blocks.

If you really want to fit an RB25DET it would have to be from a Stagea 4WD. Or you could use a non turbo RB25DE block from an R33 GTS-4 which is also 4WD.

While you can put an RB26DETT into a GTST, by butchering the sump a bit, it would be pretty difficult to go the other way. There is a company somewhere in NZ which makes an adapter plate to fit the 4WD sump to "normal" rear wheel drive RB engines. Guys that fit RB30 blocks to GTRs use this plate, or have to make up something similar themselves.

Apart from the oil pan rails the RB25 and RB26 blocks are pretty much identical. Cranks, rods and pistons can be swapped either way, and drop right in.

You can build up an RB26DETT using an RB25 block for a GTST and all the GTR bits. This keeps the old RB25 engine number (hint) and the original skinny sump.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Borci88
      Borg Warner EFR Series Turbo's V 2.0

      By Borci88 · Posted

      Bit of an update to this one. Having some issues on the dyno that held us back (boost spiking) and I want to pass some info over you guys and see what you think is wrong with my setup. The current readout on this dyno is 462rwkw on a low reading dyno so keep in mind it is a real world 500rwkw setup on a hub dyno. Don't read into the power figure too much as a sign of the issue. The short and curly of it is: 2.8 Litre Racepace build RB25 NEO N/A Head with VCT (internally standard however ) Borgwarner EFR 8474  Turbosmart 50mm Straight Gate + Mac valve 6Boost Manifold 4" dump to full 4" exhaust (nil restrictions) Wastegate plumbed back in and all angles in the exhaust system are acceptable and not too sharp. GFB SV52 BOV in cooler piping  Turbosmart BOV in EFR Housing   The issue we are having is it comes onto full boost for example at 4000rpm and spikes to 24/25psi, before dropping down to 17psi before slowly rising back up to the target boost of 23psi. It was extremely uncontrollable and the tuner actually had to ramp in boost progrssively with each 1000rpm on each boost setting we selected to try and reduce the amount of spiking. Sometimes we would see a drop of 10psi from the peak at the beginning of the run, to the low, until it took the next 500-1000rpm to stabilise back up to the target boost. The tuner is pretty confident that the straight gate is just a poorly designed product and leaks too much boost upon cracking the gate open and theres no way to fix it other than going to a poppet valve. He's also confient theres no ignition breakdown or floating valves. The fueling is extremely stable as well. Turbo speed is somewhere around the 109,000rpm area. The spanner in the works for me is that prior to this Borgwarner and StraightGate, the car was tuned on -5 twins at a diferent tuner, and he also had issues controlling the boost with it spiking around the same rpm range, so to me this sounds like the same issue and it can't be anything on the turbo side as this was all changed and I think the behaviour is extremely similar, if not the same. We also removed the mac valve and did a run on wastegate pressure and it still spiked and had the same behaviour. My thoughts on possibilities are: Boost Leak VCT Cam Gear isn't reliably activating consistently - (On this however, we did a run with the VCT disabled and the boost still spiked) Turbosmart BOV is not handling the boost? However this seems unlikely to not be able to handle 20psi. I have a couple of logs that I can't make sense of if anybody knows how to read them and can obtain further logs of other parameters if they are not enough, happy to pay for anyones time. The dyno readout with the power figure is the most recent last week. The other picture is from two weeks prior to that where we couldn't break 400kw (we removed the cat), however the issue of the boost control persisted. @Lithium @Piggaz @burn4005 @GTSBoy @discopotato03 I've tagged those that were quite active in recent pages here, no disrespect to those that know turbos well but I missed tagging. Cheers 
    • Chocolate Cheesecake.
      Infiniti Q60 Navigation Update

      By Chocolate Cheesecake. · Posted

      I recently purchased a 2018 Infiniti Q60, which has an SD card navigation map. I can see my system has options for real time traffic updates etc, and am wondering if there is something I can purchase to get this working? I can see there are at least updated maps for USA and Canada, but nothing for Australia. Surely Infiniti took changing road systems and city expansions into account when they decided to use an inbuilt navigation over Android Auto/Apple Car Play, or are we doomed to drive on streets that don't exist in the navigation system if you drive to a new area?
    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      Luckily I didn't put in etch primer as I just found out it's not compatible with my body filler lol. Also just need to sand the panel anywhere between 150-400 grit so I'm in the clear there. It does say to not apply to soft old paint, I assume that means paint that is flaking, peeling,etc
    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      Yep will do, thanks for all the help.
    • itsforandres
      BCNR33 Blower Motor Resistor - Testing

      By itsforandres · Posted

      @dbm7 and @GTSBoy thank you both very much! will give that a shot!
×
×
  • Create New...