Jump to content
SAU Community

Recommended Posts

Hey guys

Last week I picked up my '95 GTR Vspec.

I'm damn happy with its performance, but I would really like some more bottom end. The car is completely stock. It even has the factory boost restrictor in place.

What can I do to get more bottom end. The car feels like it has no power whatsoever below 3 grand. Now im not too keen on doing too many mods because I am broke. I also dont need any more attention that im getting from cops and the like. So i'd like to keep it as stock as possible (incl stock exhaust).

Opinions and advice please

Thanks

Link to comment
https://www.sau.com.au/forums/topic/59839-stock-gtr-33-feels-slow-what-to-do/
Share on other sites

Make sure the timing is correct.

Change any fuel filters that are old.

Check the plugs and the gaps are correct as well.

Get a compression test done by a mechanic and a dyno.

Just to check where things are at.

If its as bad as you say there may be an underlying fault somewhere.

Plus make sure the factory cat convertor isn't blocked which can cause excess back pressure and loss of torque.

An exhaust will also help bring boost on sooner which will make the bottom end more responsive. (If you have a crappy press bent factory one)

Its just undergone compliance, so all fluids have already been changed, etc etc.

It really isnt that slow, but the take off compared to other gtr's is much slower. Driving around the city at about 2000 revs isnt that much fun. Perhaps I'm being a bit pedantic.

But honestly, there is no pickup from the turbos until about 3-3500 revs. And compared to my old stock gts-t, it's much slower under 4 grand

4 grand up its a monster :P

Would a boost controller help boost pick up any quicker ?

I have one still handy

hi, with a boost controller you will be able to bring the boost on earlier, although not by a large amount.

generally speaking, there is nothing you can do if you are used to the gtst

i have had two gtsts, and am often in a stockish gtr, and i know exactly what you mean about the slowness..

by the time my gtst reaches 4 grand you are accellerating pretty quickly and about to break traction, whereas you really need to keep the revs above 4 grand in the gtr to get a similar response. its normal, just fit the electronic boost controller and get used to it :P

Full exaust/front pipes/hi flow cat first..

then Adjustable Cam gears will help bring boost on alot earlier.

and take out the boost restricter, (won't really help low rpm tho, where the exaust/cam gears will)

very true

well ive been driving it a fair bit for the last week or so.

I'm also slowly getting used to driving it, and becoming more accustomed to its driving style

Revving it out when I need more power, and around the streets up to 3k rpm is sufficient

yeah dont drive it like a wuss!! my last gtr and my current one (both 32s ) seemed a little sluggish below 3500rpm but remember they do rev to 8k! definatly do an exhaust first, 3 inch at least and tuned lengh front pipes with high flow cat, will make more power and more rb26 noise!

have you dropped it from 7k yet??? damn it feels fast when you do that!!

my gtr is stock and I removed the boost restrictor and boost went up from 12psi to 14psi and gave me an extra 22awkw (with standard exhaust) and on the road it blows away a lot of more powerful cars

have you dropped it from 7k yet??? damn it feels fast when you do that!!

my gtr is stock and I removed the boost restrictor and boost went up from 12psi to 14psi and gave me an extra 22awkw (with standard exhaust) and on the road it blows away a lot of more powerful cars

Did removing the boost restrictor give you much better response down low ?

I'm having a fair bit of trouble removing this restrictor. Need to get the right set of pliers :)

Damn, the fuel economy on this thing aint too bad either. Averaging between 11-13 litres/100. Highway/city driving :D

Did removing the boost restrictor give you much better response down low ?

I'm having a fair bit of trouble removing this restrictor. Need to get the right set of pliers :)

 

Damn, the fuel economy on this thing aint too bad either. Averaging between 11-13 litres/100. Highway/city driving :)

Squeeze the restrictor out from the outside, use any sort of pliers and pop it out like a cork, should take you a couple of minutes. probably didnt help much below 3G although definately hit boost harder and pulled better through to redline.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I bought the model back in Japan in Feb. I realised I could never build it, looked around for people who could build it, turns out there's some very skilled people out there that will make copies of 1:1 cars or near enough. I'm not really a photo guy... but people were dragging me in a group chat for the choice of bumper as someone else saw the car before it was finished as they are also a customer of that shop. I took the photo in the above post because I was pretty confident that the lip would work wonders for it. Here's some more in-progress and almost-done pics. It gives a good enough idea as to what the rear looks like!   I have also booked in a track day at the end of January. Lets all hope that is nothing but pure fun and games. If it's not pure fun and games, well, I've already got half an engine spare in the cupboard 
    • Well, do ya, punk? Seriously though, let's fu<king go! The colour and kit looks amazing on the car. Do you have any shots from the rear? I don't quite follow how the model came around. You bought the white kit and he modified it to match your car? Looks nuts either way!
    • So my car is finally back from paint! This took an absolutely insane amount of work and should get it's own build thread - but I didn't build it. It was completed by Troy @ https://scalekustoms.com.au/ I originally bought the AOSHIMA URAS Type R kit while I was in Japan, it's supposed to look like this when assembled: Now, I thought that was cool enough until I opened the box with Dismay, as there's no way I could possibly have completed it. The thing is 1/24 and has details down to the steering wheel horn button, which is a 2mm diameter sticker. I originally wondered if someone could make it at all, as is - But then things got a little carried away. It's worth noting that the model does not have an openable bonne, let alone engine bay, OR an openable boot. - Troy has worked wonders with 3D printer and presumably better eyes than I will ever have. My photos suck, so I will post up some of his in-progress ones he sent to me during the way. Unsuprisingly, he is very detailed. A lot of these are out of order. But he: 1) Made a LS engine and an engine bay appear out of thin air 2) Made the bonnet removable 3) Printed the rims I will buy in the future (or any rim you want) 4) Printed and added the wing that is going on 5) Tinted my back windows as this is what my car has IRL (privacy glass) 6) Added a licence plate. 7) Somehow did the interior 8) 3D Printed my actual seats 9) Made the exhaust under the car connect even though this is likely invisible. 10) Created a boot with my fking battery box, power steering reservoir, subwoofer and toolboxes back there. To say it's insane is an understatement. And I f**ked it all up because when I was re-mounting the wing (it broke in transit) I spilled glue everywhere and ripped paint up and Gregged the rear half of the car. Which about makes sense. Also, this arrived on the same day. Quite the change from: I spent 16 hours per day over the next 3 days pre-christmas putting the interior back together, mounting lip, fixing various bodykit problems with window mouldings, etc. and servicing, rebuilding my 370z brakes to go on the car 'soon', messing with heights to check clearances for new wheels, etc. I also had a foray into mounting wiper-mounted washer jets which was an absolute disaster. The bodyshop has welded (and painted) over the stock jet locations for reasons unknown to everybody (i.e they forgot) I also wanted to wire in the oil pressure sensor on Christmas Eve which was a BAD IDEA. You do not know terror like pulling your ECU apart, pinning in half-fitting pins that aren't the right ones, but trying anyway because it's Christmas eve, putting your ECU back together and having a no-start condition with a fuel pump not priming. Then you undo all your work and the fuel pump still doesn't prime. So after all that terror and horror and pain and tedious disassembly, the issue was the relay in the boot which seems to have died/stuck when I was turning the car off and on about 700 times testing shitty washer jets. I also re-wired the fuel pump power plug which fell apart in my hands. I am very happy I had 3 extra pre-made ones from a few posts/last Christmas's breakdown. https://bluewireautomotive.com/products/10-x-pcm-ecm-ecu-terminals I have put an order for these in, so I can actually add the pins to the ECU properly. The commodore ECU does not have the pins for Oil Pressure via ODB2. However the ECU can support it if you create the pins and wire them in. So for round two, and somehow attempting to route that into the engine bay through my impossible engine bay grommet is a fight for another day. It's 40C in Melbourne tomorrow, I am half tempted to drive the car with the aircon on to deliver presents to my partner's family and see if it helps with the overheating-on-40C-days-in-traffic-with-aircon-on-only issue that the vents were intended to solve. Do I feel lucky?
    • Yes, while being... strictly unnecessary. Tuning is a bit like quantum physics. You don't need to understand what Schroedinger's equation actually means. You just need to run the computation and accept the answers. With tuning, you just push page up/down until the exhaust tells you that you've got the fuel right. The VE can stay hidden behind the curtain like the Wizard of Oz and you'll never need to know what he looked like.
    • The second part yes, the first part about easy VE calculation is something I've seen a few people talk about online.
×
×
  • Create New...