Jump to content
SAU Community

anyone see me on Westal Rd Sunday??

(B1) MR_fanny

By (B1) MR_fanny,
in Victoria

 Share

Recommended Posts

(B1) MR_fanny Grand Master

(B1) MR_fanny

Posted
Posted

anyone see me pulled over, bonet up, by one of those flashy highway patrol cars on westal extention/princes hwy sunday at about 5:30:D:D come on, im hangin to get spotted, alot of people were lookin so there was bound to be an SAU'er who saw..LOL

first time its happened to me, reason was;

"we pulled u over because of ur exhaust. someones done a terrible job on your piping, you should have a word with the guy who did it"........cant remember the exact words but something along those lines.

i have a dual N1 exhaust(not that they would know) and one of the pipes bends way out and sits low underneith the diff but thats the way its supposed to be...LOL

didnt have my license with me so they took my details down and then asked me to pop the hood step out of the car to make sure they dont scratch/damage the car while they do their check which i thought was pretty considerate. did the typical check for shiny bits in the car and bald tyres, jumped back in their patrol car, ran a check on my details, gave me thumbs up and i was on my way again:D

the exhaust thing was just an excuse to pull me over but it goes to prove that if your cars up to scratch then theres nothing to worry about. probably helped that im not on my P's:D:D my respect for the police has gone up a knotch:D:D hope future encounters will be the same

Link to comment
Share on other sites
HeathGTST Community Regular

HeathGTST

Posted
Posted

Didnt see you dude but I went to knox tonite with a friend of mine and guess who was out and had a 180SX pulled up with the bonnet open???.... Our good friend from the knox police station Officer Pettet in his shiney silver XR8... Too bad for him I was in my dads Lexus SC430 so i made off without him noticing!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      So I've been working on the car a fair bit, doing a lot of little things.  Still making slight adjustments to my tune, as the cold weather settles in. I've also had to start dropping boost and tire pressure as the weather gets cooler. It's getting very swirly at highway speeds. I drop to 20psi at 20C and 18psi spring pressure at 10C IAT's. I'm currently on 255 Falcon RT660's, but may look into running 275's next summer. They will fit, but barely. Might have to raise the rear a tad.  I'll start redoing my exhaust Monday, as I have the week off. I currently have an oval center muffler and cannon rear muffler. I've been told more then once from people behind me that my rear bumper is going to catch on fire one day. Seems I blow 5-10 second flames after doing a pull. No clue if that's the WMI, as I've never been able to do that before with other cars. I wanted to angle my tip down a tad so flames are pointed down and away from bumper. I also wanted to take the opportunity to reconfigure my exhaust line. I'm going to move my oval muffler to the rear with a pie cut angled tip and put in a new smaller round muffler in the center. I've rocked cannon mufflers on this car for the last few years and want to transition back the oval muffler look. I've also been looking for a stainless project to try out the new solar flux I bought. I'll post pictures on Monday, should be able to wrap that up in a day.  I'm also picking up another rear subframe this week. I wanted a second so that I could modify one with a gk tech anti squat reduction kit during the winter, and still be able to keep the car a roller so I can back it out of the garage if needed. I will also be caging it this winter. More on that later. Lastly, Speedtek still hasn't given me diddly squat. Every week for the last 4 weeks, they have been saying next week. They told me Friday to expect a shipping label that day to ship my two bad sets of ring and pinions back and nothing. There's definitely been more contact since I started destroying their company any chance I get on Facebook, but it's still just words without action.   
    • TurboTapin
      Idle issue rb20det

      By TurboTapin · Posted

      Have you done a pressure test on your intake/piping? Cleaned your IACV and Cold start valve?
    • r32-25t
      Spotted on the street....

      By r32-25t · Posted

      Bit of a dump of ones I saw on my trip. I also have a heap from daikoko but that’s technically not  on the street 
    • HYBRID VL
      KISLOC2 line output convertor for subwoofer in Q50/V37

      By HYBRID VL · Posted

      i was thinking that the 2 wires that go to the sub from factory has some sort of preamp like you mentioned and also a lo Pass filter to get just bass. now that will only use 1 channel and that really should be all i need for a sub? if i was trying to put a set of speakers in the back i can understand cutting into the left and right speaker wires. i will try how im talking about doing it and if that is crap i will do it the way of all wires. thanks for the input guys.  
    • Equilibrise
      M35 Stagea intake suction pipe

      By Equilibrise · Posted

      Challenging mig welding thin Aluminium pipe and trying to fit it in, having to bend and twist, but got there in the end. Fits really well and can easily get a socket wrench in there now to put it on/off. I'm in the middle of another project, so haven't installed the suction pipe yet. I'll post some pictures and results when i do.
×
×
  • Create New...