Apexi Safc ????

[polishstorm]

hi guys i am about to buy a car with one of these installed but apparently it runs too rich every now and then and fowles the plugs. so my question is that seeing as i may have to pick the car up from interstate and drive it back to bris.....can you just disconnect it and will the standard fuel/air settings be returned???

Cheers Jeremy

[doridori32]

hi guys i am about to buy a car with one of these installed but apparently it runs too rich every now and then and fowles the plugs. so my question is that seeing as i may have to pick the car up from interstate and drive it back to bris.....can you just disconnect it and will the standard fuel/air settings be returned???

Cheers Jeremy

Yehp once you disconnect , just reset the ecu.

Or sell the SAFC and sell the stock ecu and get a used Power FC to suit your factory parts.

Petar.

[Mick]

NO NO, if you just disconnect it im 99% sure the car will not run because when its installed the safc intercepts the airflow signal wire from the ecu (the wire is cut and the safc is joined in the middle) , so basicaly if the safc is unplugged the airflow signal wire isnt connected to the ecu.

All you have to do is when you unplug the safc you have to rejoin the airflow wire back up at the ecu, its the orange wire with a blue stripe, the safc has a yellow wire and a white conecting to each side to the orange/blue wire, they are on little push connectors so simply unplug the white and yellow wires and connect the orange/blue wires back up to each other.

or you could simply reset the safc settings back to default (so basicaly its turned off) and the car will run like normal but then you will loose your settings and have to get it re-tuned when you want it to work.

Its very easy to unplug sacf and reconnect the orange/blue wire on the ecu.