Jump to content
SAU Community

Recommended Posts

Hi Lads,

Cannot find answer after numerous searches. I live in a hot climate, and as a result the air-con sometimes takes a while to work. I set my unit to 20 degrees and only the foot vents work until the car cools down enough, then the top (dash) vents open. Must switch once the difference between the set value and the AMB value is small enough (maybe 8 or 9 degrees).

What really annoys me though, is that I cannot manually turn the top vents open until the cabin cools enough to automatically switch.

Is this normal? Can I override this?

Thanks, regards

Link to comment
https://www.sau.com.au/forums/topic/60237-r32-gtr-air-con/
Share on other sites

The climate control has a feature that isn't documented in the R32 owner's manual.

With the fan on, temperature set at 18 (the lowest it will go), press and hold the temperature

down button for a couple of seconds. The climate control will show "FC", the air conditioning

will come on in re-circulated mode. This must be a fast cool, as it sets the optimum setting for

cooling the car quickly. The re-circulation mode can be turned off.

There is a "FH" mode also with the temperature set at 32 (the highest temperature). Press and

hold the temperature up button to enter the FH (fast heat?) mode.

Link to comment
https://www.sau.com.au/forums/topic/60237-r32-gtr-air-con/#findComment-1145869
Share on other sites

Lads - thanks for the comments.

I know about the mode button - it switches to manual but still does not change vents.

I know and use the FC mode quite regularly - we must have downloaded the same skyline 'book!'

I ran a diagnostic check a few weeks ago, and it came up with a sunload error (common, ignored) and a water termerature sensor error. I do not think this has anything to do with the vents, though, as the AC is bloody cold when its working.

It just takes a little time to switch vents over, depending on the inside car temp.

Thanks for the comments lads.

Link to comment
https://www.sau.com.au/forums/topic/60237-r32-gtr-air-con/#findComment-1147409
Share on other sites

He had the car for a few days, Changed from old gas to new, cylender was damaged so he had to degas it, replace and regas it again. new control unit, from memory around 300. the guy I use is really really good. I always take any of my cars to him without a worry

Who is this guy? How much for the gas switch?

Cheers,

Lucien.

Link to comment
https://www.sau.com.au/forums/topic/60237-r32-gtr-air-con/#findComment-1147447
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That ring thing is interesting how it's holding everything together 
    • Hey guys. I have a 400R on its way to Australia from Japan currently and have a few questions I’m hoping others may be able to help with.   Wondering if anyone here has had any luck getting the Sat nav unit to work in Australia!? Assuming the Stereo is as simple as a band expanded and tv won’t work?  Seeing as they’re based off a Q50 which is Aus delivered is there any way to link that system to the nav? Nav modules and head unit are different part numbers and appear slightly different at the rear with plug ins etc. can I put my xtrail sd card into the rv37 and will that convert the maps or update to Australian? Has anyone got any advice here?     also has anyone fitted the factory remote start and Security system once it’s landed in Australia? I put an enquirey to Nissan Japan in via a third party, and they suggested it needs a Nissan Japan dealers device to setup and couldn’t guarantee if one here could do it or not. They can supply and I can physically fit it but to setup I would need a dealers device. Any information here would be appreciated also. I’ve seen one here with it fitted already prior to leaving Japan at a dealer/inporter, so clearly passes compliance and works when fitted Japan and doesn’t need changing here.      also, does the tyre inflation sensors work here? Does anything change with them when the vehicle arrives? Where are they actually situated? I’ve read they have batteries and they need to changing at times and seems like resetting involves the nav system?    any help here would be appreciated and any other aust specific information to help would be great. Looking forward to see what the current generation skyline is like and eager to see how many of the gadgets can be utilised here.  Thanks in advance 
    • Do need to take it with a pinch of salt. One of the adapter failures, they clearly had setup issues with the flywheel.  One of the slipping ones I spoke to and it was pretty clear the throwout was riding, rather than fix, just swapped to a new clutch.    These clutches are being put in anything from 5k offroad 4x4 beaters, GR yaris, 500hp commodores to 1200hp barra monsters. Bound to be some issues in some of them when they are not a simple bolt in affair due to the changes in height.    There is a lot going on in this picture and unless I did the job myself no way to tell what really happened. 
    • I did this mod in 2019  You just have to modify the top bracket of the ABS/TC/Fuel Pump Control ECU so it sits more upright and closer to the back seat and run a good quality positive battery lead from the engine bay, the negative lead i just bolted down to the body in the boot.
    • Damn... Not the feedback I want to hear.
×
×
  • Create New...