Jump to content
SAU Community

Recommended Posts

OK, here goes....

About 4 or 5 months ago I bought myself another R32 GTST with the intention of making it "my ideal car". It is going to be a daily driver.

I am not that into speed. The turbo back exhaust on my old R32 was fast enough for me to have heaps of fun.... I just want something really nice to look at that is also very fun to drive without losing my licence every time I accelerate.

I wanted to do the following to it:

RB25DET

18 inch Wheels

full respray

Full GTR bodykit (not guards)

turbo back exhaust

front mounted intercooler

Apexi AVC-R @ 11psi

Apexi Power Intake Pod - would love to keep the standard panel filter but intercooler piping wont allow for it.

Here is my progress:

RB25DET - waiting on dodgy supplier to even get back to me - read below

18 inch Wheels - I know the ones I want

full respray - colour sorted - quote pending

Full GTR bodykit (not guards) - have everything except rear pods and headlights and front bumper support

turbo back exhaust - DONE

front mounted intercooler - DONE

Apexi AVC-R @ 11psi - when engine is sorted

Apexi Power Intake Pod - when engine is sorted

My problem:

My mechanic told me that he could get me an RB25DET half cut from Japan for $2000. He said that he has a supplier who has promised this. I have not outlaid any money on this engine, however it is 4 months later, and the guy is just not returning his calls. Looks like it will never eventuate! MY mechanic is not dodgy, and doesn't feed me bs. He is a good guy, but obviously has nothing to work with...

I am thinking that I am either going to just put a new high-flowed turbo on the standard RB20DET, and go ahead with the rest of the mods (including AVCR) instead of waiting any longer.... It seems the only other option is to get an RB25DET from somewhere else and pay $3500 and up for a halfcut.

What would you do considering my initial aims....

Link to comment
https://www.sau.com.au/forums/topic/60244-what-would-you-do-r32-project/
Share on other sites

  • Replies 58
  • Created
  • Last Reply

Top Posters In This Topic

GTR Bodykit = Lame

Your car will never be a GTR so why try and make it look like one? Anyone who knows skylines will be able to pick it as a fake anyway.

Do you wear a really bad fake rolex too, by any chance?

Does your g/f have a $10 Louis Vuitton bag with LM on it instead of LV?

.. I've got a better idea, just make it look like a really tough GTST! :D

:(

Umm...so whos car is it?????

Flat out the best looking GTST typically have GTR front bars, in my opinion they are the only bar that looks good on the R32, no aftermarket bar comes close...

GTR Bodykit = Lame

Your car will never be a GTR so why try and make it look like one? Anyone who knows skylines will be able to pick it as a fake anyway.

...  

In the words of the wise Geoffrey Lebowski "Well, like... thats just your opinion man":)

My 2c, if its done properly then it will look good so wheres the harm. Throw an RB25 in it and you will have 12.5-13 sec 1/4 performance to:thumbsup:

GTR Bodykit = Lame

Your car will never be a GTR so why try and make it look like one? Anyone who knows skylines will be able to pick it as a fake anyway.

Do you wear a really bad fake rolex too, by any chance?

Does your g/f have a $10 Louis Vuitton bag with LM on it instead of LV?

.. I've got a better idea, just make it look like a really tough GTST! :D  

:(

OK I had a feeling that I would get the response... No problem.... It is just my opinion that the R32 GTR is one of the best looking cars on tyhe road. I Love the front bars and I love the rear wings, so I am going to fit one on my car. I will not be fitting GTR badges, and I will never pretend that is a GTR. My car is for me and not what other people think it is or isnt.... I don't wear a fake rolex, and my girlfreind doesn't have a fake bag (that I know of) - I just like the look and don't care what idiots like you say.

GTR Bodykit = Lame

Your car will never be a GTR so why try and make it look like one? Anyone who knows skylines will be able to pick it as a fake anyway.

Do you wear a really bad fake rolex too, by any chance?

Does your g/f have a $10 Louis Vuitton bag with LM on it instead of LV?

.. I've got a better idea, just make it look like a really tough GTST! :D  

:(

WTF? You're a ****ing egg. Where did he say he was making a "fake" GTR? From the way I read his thread, he wanted to IMPROVE the looks of the GTST.

Stock Gtst's look shit house, and as with most people on this site, they'll say the GTR body kit is the nicest factory kit out there.

Umm...so whos car is it?????

Flat out the best looking GTST typically have GTR front bars, in my opinion they are the only bar that looks good on the R32, no aftermarket bar comes close...

In the words of the wise Geoffrey Lebowski "Well, like... thats just your opinion man":)

My 2c, if its done properly then it will look good so wheres the harm. Throw an RB25 in it and you will have 12.5-13 sec 1/4 performance to:thumbsup:

well said royce

dosnt hurt to have a gtr front bar

makes more room a fmic

most of the people that complain about the gtr bar on gts are the people with gtr's, i dont see the harm.

each to their own

I've got a GTR kit on my 32 (except for the bonnet and grill). I never pretend that my car is a GTR and am glad that people don't think I have a GTR or else everyone would want to race me. I just think the kit is the best looking out there and the most practical. I'm hoping to get a GTR or carbon fibre bonnet in the future for the weight loss (however little it is) and will probably get a different grill to the GTR so that nobody thinks it is a GTR. As far as the original plan stated in this thread, it sounds great. If you can't get the RB25, how about just spending the money on the RB20? You also didn't include a new clutch on your list, mine is stuffed and the car only has a cat back and a pod filter.

I would love to know how hard a HKS 2510 would go on an RB20. Based on ppl results with the 2530 the 2510 would have to offer near std response, and with the usual breathing mods, ecu and cam gear etc etc it may even have better then std response. By std i mean RB20 with std exhaust etc

And it would have to bee good for a punchy 180-190rwkws. I would not be surprised to see it top 200rwkws with 1.3bar all on the std injectors and AFM. It may lack top end pull but on a street car i am curious of going that route myself:)

Car already has Apexi damper adjustable suspension so that all taken care of...

Not too interested in spending $3500 on the RB20 as it will be money that never returns to my pocket... If i put an RB25 in then the car will have an edge when selling, and will have less kms, and some of the $$$ will be returnd when selling.

If I keep the RB20, then I will most probably just buy an R34 turbo, and leave it at that... Then if anything goes wrong with the RB20, I will upgrade to an RB25.

I could be wrong though... Can anybody tell me any experience they have had rebuilding an RB20 (cost, effort, benefits when selling).

Roy: The guy asked for an opinion and I gave it. People who make their cars look like GTRs including badging it as a GTR are pathetic. I've always thought this even before I bought a skyline. I've seen people on the side of the street pointing and laughing at guys who have GTR badges on GTSTs.

ROY, This is not about "just front bars!!" this is about dressing up a car with grill, bonnet, bar, wing etc. to look like something that is not for the sake of their car looking cool. "Duh I know, Duh lets put a GTR kit on it.. that hasnt been done before" Very imaginative. Very imaginative.

In this instance its not such a big deal because MR R32 is not badging it as a GTR. But for gods sake wheres the creativity? I think he'd be much better off making it look like a tough GTST as opposed to another GTR look-alike Wannabe.

For EXAMPLE: do the front bar, stock bonnet but and no rear wing. Leave the gtst sticker on it.. be proud of your car!

silver gts-t: I quite like your car because its still obviously a GTST and looks hot! :(

Nismo_boy: Thanks.. I've never been called an egg before..? Actually I quite like the look of a tidy stock GTST lowered on a big set of wheels. I dont think they look shit house at all. The most awesome GTST's i've seen have not had GTR body parts bolted onto it.

Furthermore, when the less educated mates of yours see your car and go "oh my god sick man you've got a GTR?" what do you say? "err no actually its a gtst".. "but its got mods"..

Well, I give up.

Roy: The guy asked for an opinion and I gave it. People who make their cars look like GTRs including badging it as a GTR are pathetic. I've always thought this even before I bought a skyline. I've seen people on the side of the street pointing and laughing at guys who have GTR badges on GTSTs.  

ROY, This is not about "just front bars!!" this is about dressing up a car with grill, bonnet, bar, wing etc. to look like something that is not for the sake of their car looking cool. "Duh I know, Duh lets put a GTR kit on it.. that hasnt been done before" Very imaginative. Very imaginative.

In this instance its not such a big deal because MR R32 is not badging it as a GTR. But for gods sake wheres the creativity? I think he'd be much better off making it look like a tough GTST as opposed to another GTR look-alike Wannabe.  

For EXAMPLE: do the front bar, stock bonnet but and no rear wing. Leave the gtst sticker on it.. be proud of your car!

silver gts-t: I quite like your car because its still obviously a GTST and looks hot! :(

Nismo_boy: Thanks.. I've never been called an egg before..? Actually I quite like the look of a tidy stock GTST lowered on a big set of wheels. I dont think they look shit house at all. The most awesome GTST's i've seen have not had GTR body parts bolted onto it.

Furthermore, when the less educated mates of yours see your car and go "oh my god sick man you've got a GTR?" what do you say? "err no actually its a gtst".. "but its got mods"..

Well, I give up.

Thanks for the objective reply pentae. I understand what you are trying to say - however we disagree... I don't really like any kits that are available for the GTST and dont really like the stock look (I also dont really like the no rear wing look - strange I know - everyone loves it!).

In terms of educating friends on GTR's this is much easier said than done... I have been trying on 2 friends to and from work for days now... Mainly R33's, and they can't tell the difference no matter how many differences I point out.

My plan.... get number plates declaring that it is a GTST - because I am proud that it is a GTST.

Thanks for the objective reply pentae. I understand what you are trying to say - however we disagree... I don't really like any kits that are available for the GTST and dont really like the stock look (I also dont really like the no rear wing look - strange I know - everyone loves it!).

In terms of educating friends on GTR's this is much easier said than done... I have been trying on 2 friends to and from work for days now... Mainly R33's, and they can't tell the difference no matter how many differences I point out.

My plan.... get number plates declaring that it is a GTST - because I am proud that it is a GTST.

you should b in parliment dude

very inspirational

(but i aint putting the wing back on)

I hear you Pentae, but its his car. I dont understand why ppl do things, but hey its not my coin. I think the GTST can look tough enough without going to the extreames of GTR kits etc.

That is until you park next to a GTR at the track and you are reminded just how wimpy they look without the guards etc etc:(

As for mods...well mine is race modded after a small fire at Winton the other weekend:( Std engine but with Trust turbo kit, HKS filter, exhaust and front mount, PFc, injecotrs and susp and brake work..i love it:thumbsup:

Excuse all the photos, but i just love the thing R32 GTST rock:)

Before Fire...;):):(:)

Wear the GTST badge with pride

462Drags_Rear_QTR.jpg

Needs a GTR front bar....

462Before.JPG

462Drags_Side_burnout.jpg

After Fire:(:(:(:D:(

2471Resize_of_Picture_045-med.jpg

462Toasted.JPG

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey was wondering if you ended up installing the R33 GTR speed sensor - I found one too and wanted to confirm it's a direct swap into the R34 6 speed?
    • After 23 years of owning a Skyline, finally had the latch go.  Followed this guide,  works like a dream again. Great Guide 👍
    • Hi all,   I’ve got the biggest lot of problems with my R33 GTS-T   It was a freshly rebuilt 25th anniversary RB25DET (plastic cas, neo cams) probably 6 years ago now   The engine was running so well but I fkd up badly and trusted someone I’d known for 10 years that was well known around Plazmaman for his welding and fab work. I added a lovely photo of some of his previous work. Not sure why my car was worked on by whoever did this shit     I’m normally someone who would never open myself up to something like this, I still can’t believe I did it. Trusting him literally fkd it all up for me. Everything has been a struggle, like it’s almost been 6 years that’s how much I’ve just on and off been trying to work it all out.    All I wanted was a car that danced down low, like full boost from around 3~3500rpm to redline, don’t really care what power it puts down (if it ever does) but I just wanted it to be quick to get on it.    He recommended the turbo to get, I picked Hypergear but he told me to get the front 4” with a T4 and 0.68 rear housing.    I was expecting all these beautiful welds, tidy fab work and paid for it to be ready to go to a tuner when I got it back.    I got a car back that was an absolute mess, I actually couldn’t believe it was my car anymore. I don’t think you could even call what he did welds, they’re disgusting.    So I stripped everything he touched off it and with every bolt I loosened it just got worse and worse.    I covered it and literally built and finished another car in the meantime but now it’s getting to the point where I really want my Skyline back.   Its a struggle because I paid him to do all this shit because I didn’t know how to and now I’ve had to try and figure it all out omg    Please excuse the bird shit horrible welds, I’ve got my show pony car and am so beyond dealing with this car I don’t even really care at this point.    If someone told me about what he did to my car I wouldn’t have believed them but it happened to me. It was unbelievable. He went missing, my car went missing, it came back missing parts, the straight af chassis rails bore the scars of being dragged up a trailer backwards, even the sandwich plate was bent. Everything was leaking and open to whatever fell into it, rounded off/ missing bolts, power steering oil and coolant everywhere, no gaskets, parts stolen off it, even managed to damage the sump pan.   Promised me he’d finish the car, knew what it meant to me, I paid him thousands and thousands just for him to trash it. He told me he was fully licensed and insured, come to find out he’d cancelled his ABN, so obviously no insurance. I had laid up insurance on the car and would’ve been covered but I was scared they would’ve written it off or because the business was no longer trading I’d still be liable.    He was supposed to:  New fully custom mild steam pipe exhaust manifold with turbo location moved from factory position to high forward mount. (I don’t know if it is a mild steam pipe, I’ve got a funny feeling the waste gate isn’t in a very good position and I don’t think the outlets off each cylinder are equal) 4” custom stainless steel dump with external gate (he re-plumbed it) Cut and shut OEM intake manifold with throttle reposition (I ended up doing the throttle reposition) Box in pod filter (left out) New 100cel catalytic converter (pretty sure it’s there but unsure if it’s 100cel) Front mount intercooler piping fabricated to suit (all smashed up and rusty holes where he was supposed to make it look standard where fmic piping passes through. I don’t even think my front bar is going to fit 🙄) Custom 5” intake pipe from pod to turbo (didn’t come with it so had to do something to make it work with the Z32 afm)   Engine: Full cylinder head service & machining  Brand new valves Precision upgraded spring kit Engine block honed New bearings  New piston rings  New ARP conrod bolt kit New ARP head studs Cometic head gasket VRS kit   ATR43SS2 ball bearing turbo 0.68 rear housing  Turbosmart 45mm external wastegate (got delivered to the fab bloke, I’ve got no idea what spring is in it, I’m assuming the one that came pre installed) Walbro 260 fuel pump  Nismo 740cc injectors (tested to 880) Spitfire coil packs GCG FMIC RB25DET manual 5 speed 4:11 rear diff   I’ve got an Apexi Power FC in it atm, I was hoping to just get it to operating temp to make sure everything was okay before towing to a tuner but it’s over-fuelling too much. I don’t think that’s going to happen so i think I’m going to get either a Link G4 or Haltech for it. What do you guys recommend? I can’t work out the power FC so just gonna give up on that one     It’s got an exhaust leak coming from somewhere I can’t see 🙄    The fuel pressure was steady but now it like drops from 40 to 20psi randomly (noticed this yesterday)    I’ll attach pics of the shit he put on my car and the engine bay now as it sits    I really just need some help, I need a tuner in Sydney I can trust, I’d like to be with the car while it’s being tuned if possible, I know it looks terrible but unfortunately I’ve just got to put up with it for now and fix the cosmetic stuff later   Do you guys think the manifolds are going to be okay? Or do I throw the exhaust manifold and try again?   I don’t even think these combinations are going to work tbh   I know everything I fitted was rated to be able to take at least 400kW but most rated higher    If you’ve gotten this far I really really appreciate it 🙏 I don’t mind if you trash me or the car, I made a rookie error and f**k I’ve paid for it. As you’ll see 🙄  
    • From everything I’ve heard you’ll be waiting a long time for  the parts to arrive 
    • Have you looked at the workshop manual?
×
×
  • Create New...