Jump to content
SAU Community

Recommended Posts

Hi B5URK,

There is an alternative to getting a new head unit, which is the FM modulators that change the frequencies.

Jaycar, Strathfield and any number of car audio places will sell you one that usually changes the range by some number (best to get the one that changes it by 20Mhz as then it makes sense ie. 101.9 becomes 81.9) and then everything else works OK. These converters use std australian aerial plugs though, so check what kind you have before you start.

Good luck

Ned

  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

  • 3 weeks later...
what to do if yours is cut off?

lol

i'd follow the cut wire until u find the next connecting point and replace it from there...

better than solderring it in my opinion. but i dunno if its a lot of trouble to do this. probably is actually :rofl:

Is this the same power wire that raises/lowers the antenna when the stereo is switched on? Or is there a separate wire for the signal booster?

make sure you connect the power-antenna output (usually the blue wire) to the black/red wire in the centre pin of the factory headunit plug. This powers the factory antenna signal booster.

There is another black/red wire next to it but it's a speaker wire.

  • 3 weeks later...

Hi Guys,

Went in to my local Auto Barn shop and ask for a device to allow me to pick up 90+ Mhz range of radio station and they gave me this:

Aerpro FM Antenna Booster - AP342

On the back it says:

Amplified FM Antenna Booster in or under dash mouting.

Power Frequency gain 88Mhz > 10.5dB, 98Mhz > 10.9dB, 108Mhz > 9.5dB.

Can anyone (Chris Rogers??) confirm that this will allow the standard R33 radio to pick up aussie stations? I guess from reading this thread that I will need the antenna convertor too??

Thanks,

Justin.

  • 1 month later...

Ok so i have bought the antenna conversion adapter from Autobahn and here's the thing, my car is different from y mates. EG the antenna adapter he bought is different from mine, should this be so? Once i sort this out can i remove the Jap antenna's from teh back of the car or do you ahve to leave them there?

ben,

what does your car antenna look like? if its the two pin item them you should have AP348a as the antenna adapter. post a pic up ( or email [email protected] ) and I'll help.

ben,

what does  your car antenna look like? if its the two pin item them you should have AP348a as the antenna adapter. post a pic up ( or email [email protected] ) and I'll help.

Yeah its a 2 pin plug and the AERPRO adapter i got is a AP348A

  • 1 month later...

Guys if anyone is looking for the antenna adaptors I currently have a couple of the Aerpro AP348A adaptors brand new. Bought two and didn't need them in the end. $12 will get you one delivered via Australia Post. PM me if you're keen. Vijay.

  • 3 months later...
  • 2 weeks later...
  • 8 months later...

i just got car a few weeks ago it said "alpine stereo" on the car add however when i took it for a test drive i didnt play with it to busy listeningfor all those little sounds like gears shocks bakes and so on. so now i am left with a japanese double din head unit with mini disc player, problem is not even the cd player works on it.....or the stacker in the boot alls i can get is christian FM...FULLY SIIIIIIIIIIIICCCK MATE!!!! i pic up all the chicks now

i think im going to rip it out this weekend and chuck it in my fire place, bye bye alpine its time to die!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • In a few years from now, you'll regret that. It'll eat away at you, knowing the truth of the ugly hiding beneath the beautiful exterior... 😛
    • I don't think the G2 profile is particularly dangerous for the engine per se, more just are you actually ok with the turbo lag trade-offs? If the answer is yes then go for it. I personally don't think I'd be ok with it because I spend so much time at lower RPMs and I really enjoy the feeling of being able to stay in 5th gear on the highway and just roll into the throttle to get boost. Or staying in 3rd gear on "gentle canyon cruises" without feeling the turbo lag too badly. The 525 pump should be able to run flat out on factory lines but I would bet the pressure drop from pump to regulator is quite impressive. I don't know how much it would be exactly but I've seen figures like 30 psi thrown around.
    • It's interesting seeing everyone talk about what level of risk they are happy to tolerate.  Building a GTR always has a level of risk, you could be that lucky guy that drops 20k on the engine build alone and still has the thing go pop on the dyno. Life is fun like that.  The way I see it, the thing is a toy to be enjoyed. I'd be happy to turn up the power on stock motor and limit the risk with sensible tuning and engine protection. If it still goes pop, it is what it is. The car isn't a daily driver so it can happily sit while a plan is made to sort it out.  Given this thing will be a street car only, I really feel it's worth the (relatively small if managed well) risk to turn the power up to around 350KW on e85.  I don't think anyone getting into the skyline game now is doing it out of logic. Surely it is a purely emotional decision so I'm not sure how important it is to think about the engine build logically. The heart wants what it wants.  @joshuaho96 little note for Josh, I run my 525 pump flat out all the time and through the factory lines without any issues. (excluding the melting connectors, that's sorted now. we'll pretend it never happened lol)
    • But the Nexus S3 is very expensive and won't be as purpose-built for the application as a separate electronic boost controller :^) More seriously my pet issue here would be that the Walbro 525 running at 100% duty cycle is going to require more FPR than the stock setup can handle. I'm also pretty sure from what I've seen elsewhere you might want to slow down the pump regardless unless you're going to come up with some way of upsizing the fuel lines coming from the fuel tank. Factory 8mm fuel line doesn't actually flow very much if you want to keep pressure drop down between the fuel pump outlet and FPR. If you really want to "keep it simple" I would run only as much pump as you need and source a fuel pump controller to slow down the pump in the vain hope of being able to run stock-style FPRs which are pretty dinky. Or just use the HICAS lines and it should be mostly fine. OP should also really think hard about what profile they'd want out of the turbo. My pet choice here would be the G1 profile rather than anything higher power but YMMV. I already think ~stock turbo lag is pretty bad so I don't want to make it worse. In "gentle canyon cruising" I found that I spent a lot of time around 4-4.5k RPM. I also recommend DIYing labor if you're detail-oriented enough. Costs are high for labor + if you do it yourself you can be your own quality control.
    • GTSBoy is again on the money. My actual advice? Sell the car. (really). For what it's worth as is, you can sidegrade into something much better. If you care about function then this is the actual move. If you want a Skyline to perform, set aside about $100K to do it. This is NOT a typo. You will see right away these are two very different mindsets. Realistically we're talking full restomod for any Skyline still kicking around. Have an honest think about which one you are.. and what you want to do, and how much you want to invest in this (with no return).
×
×
  • Create New...