Jump to content
SAU Community

Recommended Posts

Hi all.

Took my car down the coast over new years, and has since developed a mild squeak, then scraping noise coming from the rear left tyre.

Was staying at a friends beach house down near the beach, and hardly drove the car. The back roads are mainly gravel/dirt, so i drove very slowly and carefully, didnt hit anything.

Which is why i am suprised that something may be wrong. At first i thought maybe something wrong with the tyre, or stone stuck in brakes etc.

It does a slight squeak when crawling along at walking pace, but the sound gets louder and louder, until it sounds like a scraping noise.

I managed to drive it back to town (100km+) without incident, and the noise appeared to have gone away. However driving it around my block just now, it was certianly there.

I gather no one will be able to shed any light as is on the forum, I didnt see anything obviously wrong during the day, and cant see under the car whilst moving.

Has anyone suggestions on where i might take it or do. My usual mechanic is on holidays, so i am out of luck there. Is it worth trying the local tyre shops?

I think it just needs to be put on a hoist, but doubt they can troubleshoot as it prolly only becomes obvious whilst driving, unless jumps out at someone.

There are several workshops around, but they are sharks in this area. I dont mind taking it to some franchise, so long as i dont need to replace major parts. Wondering if i should go to a suspension shop instead, altho i did get burned by pedders last time.

Aim here is to get car back on the road, as most places seem to be off til 17th.

regards,

hb

I was pretty shagged on monday night. Didnt think to jack the car until today.

Had some friends who are apprentice mechanics, who said i could bring it by their work.

Drove it around the block, at first thought it was wear indicator, but isnt constant, and looking at the pads through the wheels is heaps left.

I was planning to jack the car, but they have nicked off now after working all day. Said i should be fine to drive it, encouraged me to do so, shake whatever is lose, but would have thought driving on freeway 100km would have done that.

oh well. obvious thing to do is yeah, jack it & clean it.

cheers.

UPDATE:

Well the noise seemed to have gone during the past 2 days.

Ended upl putting it on hoist, to see what might have been the problem. Was expecting to see some scratches or damage somewhere.

Found a small stone caught in the backing plate of the disc. Nicely polished on a few sides. Assuming this was the culprit. Makes sense.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeap, not as doorty as ITB's, but alot more doorty than before, induction sound great when I'm up it 🤗
    • Any difference in induction noise?
    • If I got a dollar for every flipped commuter missile I've driven past I'd have two dollars   Some people get into wild adventures on the road and I doubt it's gender or ethnicity specific. I'm just glad I don't usually drive during peak times.
    • Just got the car back and gave it a good run back home Power wise, whilst it only made a extra 5 killerwasps up top at 7200 rpm, it made more power everywhere from 2500 rpm and kept pulling much harder all the way, to the point of me relearning when to shift so I don't hit the 7200 limiter, with the old intake it seemed to take alot more time to rev out, and, throttle response is also much improved  As I didn't want to remove the bumper every time I serviced the air filter (basically every aftermarket and fabricated CAI has the filter behind the bumper) it currently has a hektic exposed pod in the engine bay sucking in hot air, this will be rectified shortly after some some of my CAD (cardboard assisted design) for a alloy heat shield feed by the OEM intake tube behind the bumper, this will cop some wrinkle black paint, as well as the intake pipe for that totally OEM look... The only fly in the ointment was that the OEM "strut" brace doesn't fit over the rear runner of the new intake with the 2.5 engine is in the engine bay, as the 2.5 raises the engine up by 20mm, it's not a war stopper, and I didn't notice any difference without it in some twisties, but....... MX5 Mania is bringing in some GWR "fancy pants" braces that apparently do fit, if it bolts up I'll grab it, it is also stiffer than the OEM one, which is a bonus All in all I'm happy with the outcome      Fancy pants "strut" brace that gives the required clearance      This is where the clearance issue was, the GWR extends out past this
×
×
  • Create New...