Jump to content
SAU Community

Intercooler and piping Kit group buy


rmahnovetsky
 Share

Recommended Posts

Hi Guys :)

PIPING

Good news piping will be arriving in australia in ~ 1 month for the s13, R32 and R33. More info and hopefully pictures will be available new week. So if you want to book your kit then reply to this thread. They will be

$500/kit for 10 or more buyers

otherwise $525/kit

Contents

This kit will include stainless steel mandel bent piping, the silicon joiners and the little bits and pieces to lock and tighten it down. Basically it will have everything you need except for the cooler.

Piping will fit the coolers I sell you.

INTERCOOLER

My supplier stocks these intercoolers

600mm x 300mm x 76mm and the

450mm x 300mm x 76mm.

Group buy will be as normal for the coolers as they are in brisbane and can be shipped immediately.

Intercooler Prices

LARGE

Size: 600mm x 300mm x 76mm

up to 5 buyer: $330

5 to 10: $300

10+: $295

Size: 450mm x 300mm x 76mm

SMALL

up to 5 buyer: $325

5 to 10: $295

10+: $290

postage $25 to the east and $30 to the west of australia.

Design

These coolers are from same factory the hybrid get their cooler manufactured. So if you like you can call them a copy or a hybrid cooler without the badging up to you. So they are exactly the same design/quality/performance as the original hybrid coolers. The specs you see on those intercooler also applies here..

Here are the specs

Attrictive polished aluminum look

3" inlet and 3" outlet pipes for high flow

Low pressure drop 0.2psi at 15psi of boost

80 psi for up to 800 horses

Made by lightweight but strong material. Same Structure and material used as famous "Hibrid" Intercooler. Weight ~8kg

All coolers have been Pressure tested.

15 bars core design. For more efficient air flow over the older 16 bar design.

PACKAGING

As seen in the picture the cardboard box has polystyrene strips to protect the fins from transport damage. The cardboard box is even double up in places for extra strength.

PAYMENT

Payment must be by Direct Deposit.

Local Pickup is available. Save postage

ANY DOUBT?:angel:

If you have doubt about buying from this group buy do a search for other groups buys with my name. Im sure you will find out quickly Im an honest bloke . Also if for some rare reason I can't get the parts and you have already transferred money to my account your money will be transfered back to your account straight away!!

ADMIN

To make admin easier for me as Im prediciting there will be a lot of people wanting these kits. When you reply can you please tell me eactly what you want in this thread. Example

"large cooler

pipiing kit r33"

"piping kit r32"

"large cooler"

Thanks guys any question feel free to ask me.

COST REDUCTION

If you buy a cooler and piping I will be able to knock off some cost of the postage. So ~20 saving will be achieved. :)

PIPING KIT BOOKING

R33

1) Mr.R33

2) LANFOH R33

3) Damien

4)

5)

R32

1) Sheepy R32

2) jager R32

3) z3n2k R32

4)

5)

S13

1) SuperGimp s13

2) Seth s13

3)

4)

5)

COOLER

1) Damien R33

2) Mr.R33

3) SuperGimp

4)

5)

6)

...

Link to comment
Share on other sites

  • Replies 116
  • Created
  • Last Reply

Top Posters In This Topic

how big is the piping kit. 2.5 inchs or 3 inchs? And will the fan blades need to be cut? what type is it, the one that goes under radiator or the one that goes over engine?

i'm interested in an r33 piping kit pending the answers to these questions. I was goin to go in the other gb for piping but i don't think i'll have the cash by the closing date. Just keeping me options open. :P

thanks.

Rom.

Link to comment
Share on other sites

My intercooler arrived this morning. It's the hybrid limited edition ;)

Solid construction, nice polish. I'm not sure what, apart from the cool looking plaque, make it different to the others, probably nothing.

Once it's fitted it will be impossible to see the plaque anyway.

I can highly recommend these coolers. :P

Thanks Raf

Link to comment
Share on other sites

My intercooler arrived this morning.  It's the hybrid limited edition :D

Solid construction, nice polish. I'm not sure what, apart from the cool looking plaque, make it different to the others, probably nothing.  

Once it's fitted it will be impossible to see the plaque anyway.

I can highly recommend these coolers. :P

Thanks Raf

another happy customer ;)

I have one limited edition at home and I will line it up with the other ones at the suppliers house - see if there is a difference. But your probably right! Just a cool plaque. Anyway atleast you can tell your friends you a a limited edition hybrid cooler :D

Link to comment
Share on other sites

I have received more info.

I will have 5 R33 kits 5 r32 and 5 s13 kits They will arrive inthe first week of feb.

All pipes and hoses are 3 inch. Blue silicon hoses and Stainless clamps.Same as a hybrid kit

Pictures are not available yet.

So for you guys who want to book a kit please do so as I have limited numbers for the first batch. No money is necessary at this stage.

All kits will be $500.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share




  • Similar Content

  • Latest Posts

    • Hey Matt, Link pointed to the 2x IGN power sources from the car as a likely issue, and sure enough pin 31 in the loom does not have power when IGN is on (24 does). So at the ECU, (and this is probably the case for R32 as well as C34) most of the ECU loom goes through the firewall behind the blower motor and there are 2 plugs (of 3 in the junction box) which go up and under the dash, the third plug heads under the carpet to places unknown (likely a body to dash loom joint) So, I started to follow that problem through yesterday. Like Johnny (and R32) I assumed that power was supplied through the 2 connectors near the left headlight so I spent some time pulling the intake etc off and cleaning of 400,000klm of dirt and oil leaks and checking those pins, but there was nothing related to the engine parts or ignition fuses there (and no purple with white trace wire in either side of the connectors) Given that the wire didn't seem to go via the engine bay, I then checked there is continuity from Pin 31 to the second connector to confirm no wiring issue in the ECU loom (it looked likely, given how much that has been hacked up over the years!). The pin marked with the purple dot is the other end of the wire to Pin 31 Then I check for IGN power in the dash loom side of that connector with the key on. Nothing. Given that loom goes up and underneath the top of the dash there is no tracing it without taking the dash out, so I went to the driver's side to see if I can find the other end of that (I'm expecting to get to big body junction boxes after I pull enough apart). However, to get to those functions, I had to pull the covers off the drivers side, I'm pretty sure the problem is in this pic Yep, factory remote start (bottom right), local immobiliser (middle) surrounded by 20 years of butchery. Plan is to totally remove the remote start and immobiliser (I think I will lose remote central locking temporarily as a result) to remove all the suspect stuff given I have other more modern security in the car It's gonna take a while, and it is both cold and uncomfortable out in the shed, not looking forward to it.
    • Hey team,  The clutch on my newly bought 25 swapped r32 feels average and sticks half way. Went to go order a new clutch master but it does not look like the ones that suit the one that’s in the car…    does anyone know what clutch master is this just by looking ?  (The feed is on the side rather than the bottom like the ones the pop up online)  thanks guys new to the RB scene so any help is appreciated cheers !!
    • Id be more than happy to sign up!!! Where do I send the invoices for my fuel usage? I'm happy to provide the mower, oil, and the labour to abuse the motor, just a little help on fuel would be great...   I had tipped the container of oil out into my big "drip tray" and left the small container upside down to drain the oil out of itself overnight. PIcked the container up today, and it has a layer of what feels like either dirt, or shit tonnes of carbon in the bottom of the container. I'm leaning towards it likely being dust, as I doubt the quality of the Sunli BumbleBee having a decent air filter on it, and sections of my yard produce a dust storm, especially because of the high lift blade!   So, filled her up with some fresh Nulon. Seemed to run fine, but it seems to want to run at really high RPM (higher than normal) even with the governor spring slacked off after fire up to try reduce it. If I back the throttle off it a bit to drop the rpm to where I'd like it to be when mowing light grass, it starts to blow a bit of smoke out the exhaust. Opening the throttle back up clears that out. It's definitely breathing oil, as I put my hand down at the breather hose and it's spitting some oil.   My guess is it having been running at high rpm, oil never changed, and it eating dust has destroyed the rings. You know what that means? Time to send it!!!
    • That is what will seal with the bonnet closed. Follow it down while closing the bonnet to see where it ends up with the bonnet closed. The panels don't do anything other than spending money, which this one will do just fine. :p
    • Nah just send me a photo or a drawing and I'll tell you which is better.  It's a new SAU service.
×
×
  • Create New...