Jump to content
SAU Community

stolen cars!! what security????


Recommended Posts

I try to be the first person to actually answer this thread,

A mate of mine had a very nicly done up VL turbo with a top of the line Mongoose alarm system, from memory it cost up around $600.

We parked the car at the Aspley hypermarket (in Briz), we walked inside and I realised I had forgotten my wallet. We walk back and got about 50m from the car and saw a guy sitting in the front seat fiddling around under the steering column, (no alarm going off).

He only see us running torwards him about 10m away, so we grabed him and "asked", "what the Fu(k are you doing", this was the funny bit, it was a fair bit of a struggle as you may imagine, he was trying his best to avoid being beaten to death, he managed to wimper "I was just looking!"

He managed to get away (we did not chase, don't ask why), because he had a big overcoat on, he twisted out of my mates grip, as he only had hold of the overcoat. What we managed to see as he got away (as the coat was half pulled of him) was all the tools he had under the coat in special pockets, just like in the movies with a dude in new york selling watches. He was really well set up, obviously professional.

So if they really want your car they can get it. I still think Mongoose are a good brand, I have a similar model in my R33.

Before you ask, we were certian we set the alarm, I remember thinking as he set it, "I wish I had remote central locking". I had a shitty NA VL at the time. We still don't know how he got around it, we assumed he was hotwiring it or sorting out the immobliser as we got there.

My mate was very lucky, so was the theif.

Link to comment
Share on other sites

Good idea for a thread, I try to be the first person to actually answer it.

A mate of mine had a very nicly done up VL turbo with a top of the line Mongoose alarm system, from memory it cost up around $600.

We parked the car at the Aspley hypermarket (in Briz), we walked inside and I realised I had forgotten my wallet. We walk back and got about 50m from the car and saw a guy sitting in the front seat fiddling around under the steering column, (no alarm going off).

He only see us running torwards him about 10m away, so we grabed him and "asked", "what the Fu(k are you doing", this was the funny bit, it was a fair bit of a struggle as you may imagine, he was trying his best to avoid being beaten to death, he managed to wimper "I was just looking!"

He managed to get away (we did not chase, don't ask why), because he had a big overcoat on, he twisted out of my mates grip, as he only had hold of the overcoat. What we managed to see as he got away (as the coat was half pulled of him) was all the tools he had under the coat in special pockets, just like in the movies with a dude in new york selling watches. He was really well set up, obviously professional.

So if they really want your car they can get it. I still think Mongoose are a good brand, I have a similar model in my R33.

Before you ask, we were certian we set the alarm, I remember thinking as he set it, "I wish I had remote central locking". I had a shitty NA VL at the time. We still don't know how he got around it, we assumed he was hotwiring it or sorting out the immobliser as we got there.

My mate was very lucky, so was the theif.

Link to comment
Share on other sites

I try to be the first person to actually answer this thread,  

A mate of mine had a very nicly done up VL turbo with a top of the line Mongoose alarm system, from memory it cost up around $600.  

We parked the car at the Aspley hypermarket (in Briz), we walked inside and I realised I had forgotten my wallet. We walk back and got about 50m from the car and saw a guy sitting in the front seat fiddling around under the steering column, (no alarm going off).

He only see us running torwards him about 10m away, so we grabed him and "asked",  "what the Fu(k are you doing", this was the funny bit, it was a fair bit of a struggle as you may imagine, he was trying his best to avoid being beaten to death, he managed to wimper "I was just looking!"

He managed to get away (we did not chase, don't ask why), because he had a big overcoat on, he twisted out of my mates grip, as he only had hold of the overcoat. What we managed to see as he got away (as the coat was half pulled of him) was all the tools he had under the coat in special pockets, just like in the movies with a dude in new york selling watches. He was really well set up, obviously professional.

So if they really want your car they can get it. I still think Mongoose are a good brand, I have a similar model in my R33.

Before you ask, we were certian we set the alarm, I remember thinking as he set it, "I wish I had remote central locking". I had a shitty NA VL at the time. We still don't know how he got around it, we assumed he was hotwiring it or sorting out the immobliser as we got there.

My mate was very lucky, so was the theif.

AN ANSWER!!!!!

do you remember how many point immobiliser???

ive been told that a good 3 point immobiliser would take round 45mins to get around if someone knew what they were doing

Link to comment
Share on other sites

I've got the 3 point autowatch alarm in mine too, I also got the turbo run on/turbo timer bit as an option as well. This is the second autowatch alarm I've had and it is a good system, but it still comes down to the guy installing it and how good a job he does.

Link to comment
Share on other sites

i got myself a keypay with my alarm system it is awsome (just like the wrx) got to type in the code , if u try and start the car it will just start for about 2seconds then die. also i can turn off the alarm and the keypay will still be on, so u cant steal the car.

also got a pantic feature which it alarms it still if ur driving and shut the car down

Link to comment
Share on other sites

some things i do is disconnect the fuse for ignition (pink fuse in the boot) and or disconnect fuel pump fuse and replace it with a blown one. this fuel pump fuse is small so you can take it in your wallet with you. i also ensure that streering lock is on when i leave the car, have full alarm and use club lock and pedal lock.

Link to comment
Share on other sites

OK so make sure you don't get a Mongoose is the moral of the story

I wouldn't agree with that. This is exactly the point I was trying to make before: installation is the most critical part of an alarm setup. That's why this thread is rather pointless... if the car is stolen, is it because of a dud alarm or a dud install?

If you want ultimate theft protection, get a Brant Nemisis. I think they have lost something like two or three cars in the past year, all when the owners gave out the PIN code. But just because the cars weren't physically stolen doesn't mean they weren't raped for parts or damaged...

LW.

Link to comment
Share on other sites

AN ANSWER!!!!!

do you remember how many point immobiliser???

ive been told that a good 3 point immobiliser would take round 45mins to get around if someone knew what they were doing

Can't remember, but like I said it was a top end (Australian standard) mongoose alarm, so it had at least a 2 point immobiliser.

Anyone else had their car stolen / broken into with a secuerty ststem installed?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • People still have Skylines? I thought they're non-existent now. 
    • Harness update time have had great fun and learnt so much already so far with this project. I started off making both the ignition and injector sub harnesses in the hope any mistakes i made here aren't as hard to undo and learn from as the main harness.  A cool comparison of the old harness using presumably TXL wire and the new which is using Tezel. Also opted to use DTM plugs to keep the whole setup as neat and tidy as possible and tucked the wiring under the coil bracket to try and keep it all from sticking out too much. Although the injector harness, I'm not overly happy with as I'm still using the rubber boots that are supplied with the type of plugs it just looks ugly and sticks out like a sore thumb with the white identifiers so a slight redesign may be done.   Then it was main harness time and most importantly trying to route it nice and away from the heat it will use the OEM heater hose routing which is no longer present to keep the harness up high and secure. it's amazing how much smaller this harness is able to be compared to the old one. plugged everything into the emtron and with the help of the tuner again attempted to start it up and instantly fired up and running smoothly on all 6 which was a big shock to myself. So still some routing and adjusting to be done for the final fit up and installing a knock sensor harness plug which is in the post all has gone surprisingly well.     The old harness for shits and giggles.
    • They do that at random every now and then, with almost no detectable cause. Mine has done it a couple of times (over 25 years!!). Never worked out why.
    • I don't post on here and have been lurking for some time now. Many of the topics have helped me out more times than i can count. I was racing yesterday (11/9) and blew a front right CV shaft. I have spares so I popped a new one in. A thread i read previously said to check the engine mounts if you blow a front CV. Upon inspection, the front right mount was completely separated from the upper plate. This discovery saved me time and money, because i would have blown another CV if i went back out. Just wanted to thank you guys and wish everyone luck with with their builds. (Now if we could only come up with a solution for my power steering belt flying off after hitting the rev limiter, lol)
    • Either way he still need those style of spacer to go into the manifold because the photo he currently has is not going to work 
×
×
  • Create New...