Jump to content
SAU Community

Recommended Posts

  • Replies 300
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

mine made the noise ALOT more after i installed my front mount. i also have a APEXi dual chamber BOV and didn't adjust it for the first run after that and it sounded really good but i wouldn't leave it like that.. you'll kill the turbo.

you think about it, the turbo is spinning one way then when you get off the gas all this air has to go somewhere. that place is back through the turbo which is spinning the other way.. thats when you hear the chop noise.

Peformance wise, wouldnt it be better to have a complete plumback system wired to flow back just after the airpod? By doing that wouldn't it reduce turbo lag?

Thats an interesting question. Although, it does sound logical......

Has a plumback system been designed this way? Or anybody using this setup?

Steve.

Yes thats right.

My car came with the factory valves blocked and it was SHIT.

It fluttered and was laggy.

So I had the plumback reinstated and now it works BETTA.

I can't believe that you care about

some poxy sound resulting from a flawed setup, rather than

having you car working properly.

Why don't you make a recording of it and just play it on your stereo?

Or is it for everyone else to hear.

as some were asking before, you need an aftermarket air filter to HEAR the flutter because it has less restriction. you may even have the same flutter with the stock air box, but you just cant hear it. but the sound does come from compressor surge.

r33zilla : you will NOT get flutter with a HKS ssqv, believe me i've been there done that. the ssqv was designed to elimnate EVERY possible effect of compressor surge and flutter, its just the way its engineered and designed. you will only achieve the faintest flutter, which you will barely even hear.

hope that helps

if u have a stock bov, and an air filter with a large surface area such as an HKS or TRUST one u will get little flutter.. But if u got an after market BOV running stock boost and u got an air filter it will flutter pretty loud... The reason y u dont need to remove ur aftermarket BOV is cause the spring inside it is really tight and only releases when ur on high boost (8-12psi or whatever).. The Stock BOV has a very soft spring... Once u get an airfilter ur car should flutter at low revs, but once u get above 5000 rpm, it will go tshhhhhh the normal sound which is normal.. I had a stock R33 and did that and got alot of flutter.. When i put my front mount on it was even louder, and when i changed the piping to stainless steel igot even louder lol!!! It is pretty mad, but be careful with what air filter u buy cause some dont filter as good as others.. But if u just want the sound, defenitely buy a HKS mushroom or a TRUST Arinx one for abt 100 bucks second hand they always for sale.. And changing the stock air filter to the pod is very simple, shouldnt take more than 40 minutes if u got the right tools..

hope that helped..

Rob

ahaha this question plagues every forum.

To enhance your 'Flutter'

you will need a AfterMarket POD Filter.

an AfterMarket Intercooler will help amplify the sound

Different sized turbos will also depend on how loud, how deep, how high pitched

The big thing, is having steel piping from the turbo to the pod filter. Usually its plastic from the factory and people rarely change it as its not really necessary... but changing this pipe to a steel one, will help amplify the sound.

People will argue to death that it kills turbos and whatever, and its more laggy all kinds of stuff... and really, its horses for courses - whatever you prefer.

I had a bov on my vl turbo, the spring in it died and the bov was useless (could not hold more than 7psi boost and would open up sounding like an external wastegate but losing all horsepower), that sucked... it was a TurboSmart Type III. after that i just took it off and had the hole welded up.

I had a bov on my R32, and it wasnt placed properly (it was not hidden)... stuck out like dogs balls, and as soon as a cop pops your bonnet, they think its christmas when they see it, because they dont know fcuk all about cars, but they know what bovs look like and they know it shouldnt be there...

I remember i told a cop it was standard, argued the point and got away with it. But i removed it anyway.

Bloody posers.

It's full sick.

I have a s15 stock re-circ. If take your foot off the accell quick enough when on full boost you still hear crazy woosh for some reason (I thought that wasn't meant to happen with a re-circ)... this thread makes me worry now maybe it's not up to the job but I'm only running .8 bar or so. :confused:

I still don't understand why people want these noises - just get a bigger turbo and make noise with the wastegate :(

This thread is gay.

The "flutter" sound (not to be confused with the sound from a sequetial BOV) is compressor surge, it happens when the compressor is operating severly out of its efficiency range, it is not a good thing.

So when I hear a car drive past fluttering between gears, I dont think "fully sick man", I think "that car is set up like shit, and that tool thinks it is great"

If you want it to be louder,

1)block up the BOV (causes the compressor to operate at essentially zero flow when changing gears) ie; way out of its efficiency range,

2) get a pod filter - stock box is designed to muffle the sound,

3) FMIC - larger volume of compressed air for the compressor to work against (at zero flow) during gear changes.

All that should reault in a longer louder flutter to tell people your car is fu(ked.

Sorry if I have offended anyone.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
    • Some of them keep working fine. 9 out of 10 of them end up causing an absolute misery bleeding the system and get thrown on the workshop floor in a tantrum and never thought about again because they were never really needed and just added crap to the car that we could have done without. Same-same with HICAS, A-LSD, and various other stupidities that over eager 10x engineers thought we had to have.
×
×
  • Create New...