Jump to content
SAU Community

Motorsport Places


Roy
 Share

Recommended Posts

I know a few folk shop at Meridian Motorsports, and there is a Revolution Racegear in Vic, but are there any speedshops around the city area that stock the Insulation Sheathing etc etc for oil lines, rubber hoses, and also the exhaust wrap stuff, as i have thw wrap but id liek to get the proprt clips for it?

Any helps would be appreciated:)

Link to comment
Share on other sites

ROY BOY.... Theres another speed shop in Oakleigh GMP racing which i used to get alot of race gear from for the Formula 3.... they have a bit more in the way of car products as opposed to racing apparel from Revolution Racegear....... hey also good news on that note, Im dragging the Formula 3 out of the factory to compete in the Australian Grand-Prix at albert park... Formula 3 is one of the support catagorys... Im not driving my new car however because im hopefully leasing that to another driver for that event and I am far to unfit and slow at the moment to race it to its full potential... Thats what 7-8 months off the track does to you.

LA Designs used to do custom paint jobs on my helmets... I have had about 4-5 helmets done by them. really high quality stuff.... Approx prices vary from what you want... allow somewhere around $1000 for a fairly good design

GMP RACE GEAR AND PERFORMANCE

(03) 9543 6222

[email protected]

www.gmpracingproducts.com.au

L.A. Designs Custom Paint Studio

Phone +61 3 5282 8525 Mobile 0417 201 619

[email protected]

www.ladesigns.com.au

Hope thats a help for ya buddy.... Ohh by the way. wanna buy my 33GTST ?? haha enjoy

Link to comment
Share on other sites

GMP racing products also stock the schroth harnesses and HANS devices... I was thinking of organising a group buy for the schroth profi-III harnesses in place of the recent group buy which didnt go as planned...

:)

Link to comment
Share on other sites

Whats the go with harnesses. A guy was saying that the 4 point 3" Sparco harnesses with quick release are illegal for use on the street. Full Stop! They cant be used on the road?!?!?!?!? Hell they are FIA approved, is that true about harnesses down here in Vic?

Link to comment
Share on other sites

Well thats the thing, with my race seat in the car, it has so heavily bulstored that if i try to put the seat belt on, it just hits the sides of the seat, sure as heel doesnt touch me. So in an accident i move out of the seat 3-4" before i come in contact with the std setabelt which is tight against the seat.....so i need to use the harness:) I dont really care, i only have the seat in the car when going to/from the track

Link to comment
Share on other sites

Oh...and whislt im pi55ing money into the wind...anyone know someone that is good with an airbrush that can paint helmets?

One of my neighbour paint airbrush for living and i seen him always bussy with his airbrush. Let me know if you want me to hook up with him. I think his price will not be high because he do his work in his garage. That how i know he paint air brush everyday.

Link to comment
Share on other sites

I don't know if they'll have your stuff, but i'm going to get some work done at David Levy Motors or Motorsport... i know they are involved in some race stuff.... prepping an E36 M3 at the moment...

DLM Service Centre

223 Nepean Hwy Gardenvale 3185

(03) 9596 5962

maybe give them a call?? Not sure how far from you that is tho....

Link to comment
Share on other sites

Roy my neighbour swears by his mate's airbrushing tallent. Only catch is that he is about 16yrs old (the artist), but on the other hand, he will be a lot cheaper than most other people.

Your call, but it doesn't hurt to pay him a visit and look at his "portfolio".

Link to comment
Share on other sites

GMP racing products also stock the schroth harnesses and HANS devices... I was thinking of organising a group buy for the schroth profi-III harnesses in place of the recent group buy which didnt go as planned...

:)

thats prob a good idea :D

Link to comment
Share on other sites

Check the links in the "welcome to vic" thread.

If you want to paint your helmet, take into account that it may not pass pit inspection.

Paint/stickers etc can cover up cracks which would render the helmet useless in an accident, and some venues won't pass a helmet if it is painted. (especially if the safety standards sticker has been removed in order to paint it)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Gosh these bmw's are worse money pits than JDM's! I won't complain about my car anymore 😂
    • I'll just leave this quick tip here after reading your joys of getting the car in the air. It should take no more then 10 minutes to get the car safely up on stands.  So for the front, jack on the tow recovery points (marked in red). Put the jack stands under the lower control arm mounting point (marked in yellow). This photo is of a R34 GTR, however the process is the same. For the rear, jack under the diff (marked in red). Put the jack stands under the rear subframe or where the lower control arm mounting point (marked in yellow). Which point you use will depend on your stand, pick a nice stable point.  You've probably already read this but it's worth repeating. When jacking up the car or using stands, stay away from the chassis rails/pinch welds. Even the factory jack point, stay away from that too unless using a factory jack. I used those jack points for years without issue until I turned into an old man and bought a QuickJack lol. 
    • And this is where the leak is happening: https://www.dropbox.com/scl/fi/7h1vlmg2j5aa7rksvsjc9/IMG_9982.jpeg?rlkey=d3bnpau5f615zmxqmca0llvr7&st=kquvdxvs&dl=0   Apologies but it seems adding an image from a link does not work when the images are in Dropbox. 
    • Here are some pics from the auction: https://www.dropbox.com/scl/fi/gkbfaa7urogzhyzxtdgq4/4cd77e2d-e19f-45fb-80a0-f9a88fd7f51f.jpeg?rlkey=39p7xyvgr33kj0avcjry2v4ap&st=ncxmagj4&dl=0   https://www.dropbox.com/scl/fi/gkbfaa7urogzhyzxtdgq4/4cd77e2d-e19f-45fb-80a0-f9a88fd7f51f.jpeg?rlkey=39p7xyvgr33kj0avcjry2v4ap&st=ncxmagj4&dl=0
    • Hi all, From the western suburbs here. Just got my 2000 R34 GTT registered today! Got it imported from Japan through a mate who is doing them and managed to find a decent one. This one has only done 110,000 Km and had no body rust etc. so was very happy. I used to own a 25Gt back in 2015 (ate Ramen noodles for years to save up for it), but unfortunately, it got stolen TEN DAYS after I bought it!! Came back from Uni and the car was missing - cops found it in Springvale a month later with a lot of needles  😒 It was too late by then and I had moved on to a different car (300ZX), and after that one got broken into around 2018, I was in a very bad place and decided I would never buy a car again because it was just pointless!!! ~yeah, I have some very bad mojo~ 🥺 But now, with a stable job and a secure garage, I thought I'd get the R34 4D again but not as a daily! I love the R34s but a GTR is still a bit off my pay grade so settled for the GTT instead.    The first step for me is to get this car serviced and have all fluids, belts and spark plugs changed. I might do the brakes at one point too but atm they are fine, the fluids are what I want changed since this car probably sat in a garage for a long time. I'll then get some coilovers since the suspension needs to be changed anyway (the dust cover kit is disintegrating). I'll also upgrade my car alarm to a Viper system and then look at rims and tyres (I'm a sucker for TE37s - might have enough saved in another 3 years for that).   Today: I was planning to do the oil, coolant, air filter and fuel filter change this week. Started on the oil change today and MY GOD what a pain!! I used to think the 300ZX engine bay was cramped - oh I was so wrong! 😂 I've done the usual services on my cars before so it was not like I was going in blind. I looked up all the forum details about what oils to use, what coolant to use, what points to use to jack the car or place stands etc but I did not expect it to be this hard. Long story short - all I managed to do was the oil and filter change. I think I might end up taking it to a mechanic for a coolant change because my SCA stands and trolley jack just can't get far enough underneath to the cross-member and I don't want to be crushed under my favourite car....yet. Side note: In Dandenong, there used to be a shop that lets you hire their hoists - does anyone know if they have those around? I can't seem to find the Dandenong place anymore. I contacted them off FB almost 6 years ago and I'm not in it now. If anyone know of one, that would save me some time going to a mechanic for the basic services. Oil: Dark and gooey but no metal pieces. Oil Filter: Was a b***h to take off but no red flags Air filter: Yucky! Was black (Smells like fuel which makes me think it may have been running rich? - am I way off?)   Concerns: I have but one concern atm and that is that there was a very small amount of oil leaking where the engine and the transmission connect (Automatic). It may be the rear seal? It's not a massive leak and it does not affect the oil pressures or leak oil all along the driveway. It's been falling into the cover this whole time. I've taken the cover off so I can check the garage floor from time to time.  I also have not seen my engine temperature gauge ever sit at cold and slowly move up to the right spot, but that might be because every time I saw the car today, it was running. I'll check that again tomorrow. ATM it just sits right in the middle. I may just be paranoid but I don't want an overheating engine while my gauges say everything is fine. 🙈 Other than that, I'm very happy with the car! Feels like it's about time I went back to spending my weekends driving or cutting my arm on stupid sh*t in the engine bay.   PS: I will post a pic later on because I underestimated soooo badly today and it was dark by the time I finished! PPS: I broke the two damn plastic pins that hold the intake funnel section to the front bar. This is the piece made to bring cold air to the airbox. The connection to the airbox is fone, but the two clips just broke off! Should I be worried? Anyone else done that? 
×
×
  • Create New...