Jump to content
SAU Community

Recommended Posts

hmmm....ok well ive got the new ps2 and i dont want to chip it. will this mod allow me to play ntsc original games?? thats pretty much all i want from it is to play jap games and possibly dvds. does this mean that if i copy the ntsc game onto the external hdd i should be able to play it??

  • Replies 101
  • Created
  • Last Reply

Top Posters In This Topic

Yes.

All PS2's play all PS2 games NTSC/PAL/SECAM.

The question is... does your telly support NTSC ??

If not there's still hope. There are appz that patch .ISO images PAL-->NTSC & vice versa. Half the games I have are NTSC from HK and they play as per PAL, no patching.

M'kay ?

OK just checked. did back to back testing with Gran Turismo 3, HD vs DVD load times tested on all the screens available from the main menu. There was between 40-60% improvement across the menu. That's with a WD 7200RPM IDE drive (WD's do fit). the cheap one with less buffer. An 8mb buffer drive would have fared a little better. it's in my older v5/6 PS2 .

the PSTwo's USB port might be an achilles heel. USB disk drives are hella slow on my PC compared to IDE, but on the PSTwo ? Try it & see Gushiken San, at best you'll never have to swap discs again at worst they'll be slow to load.

Scratch that.

Word around the traps is:

No HDD support for PSTwo :cuss:

No HDLoader support for PSTwo. :thumbdwn:

That's the official line from $ony

$ony concocted a story George Bush would be proud of as to the lack of HDD support in the PSTwo.

The truth is PS2 always supported HDD, $ony held back while M!cro$oft was losing $$$$$ on Xbox software revenues from piracy as a direct result of HDD support. It was a commercially smart move to make the network adaptor a critical link in the chain, and to play that ace later in the game.

This is the PSX vs PS1 history repeat. And the lesson from that was: Hold on to your old hardware, it's built to a standard not a price.

I just put a 200gb seagate hard drive in my ps2, running HDAdvance 2.1. I was extremely happy with the loading times, no more load on my ps2 laser. Its nice not hearing the laser struggling to load trees and streets while driving in GTA.

MidnightGTR - check this page http://www.zophar.net/consoles/ps2.html NeoCD emu there.

Neo Geo had the best shoot em ups, hands down. Definitely get a good digital joystick for neo games. Analog response time is too slow.

ABuSD - HDLoader/HDAdvance only supports PS2 games =(

  • 2 months later...

narkeh... bring your PS2, memory card, a PS1 game and a network adapter ($30 from EB) and I'll do it for you in 5 mins... I've got a memory card editor (so you can plug memory cards into your PC and edit the files on it, same one I used a couple of years ago to get the 9000hp Mines R34 GTR in GT3). So you don't have to f**k around with all this swap magic crap.

oh you'll need a hard drive as well so I can put D1GP on it for you :cheers:

I did Danny's PS2 with a 20gb hdd out of an old PC, and I did one of my mate's PS2 using the 8gb HDD he pulled out of his Xbox :cheers: Most of the tutes out there seem to think 40gb is the lowest you can use. Bollocks to that I say.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Just one more post to show the final result and the original "janky" solution for a laugh. Everything feels really tight and no wobbling at all, very pleased 馃檪
    • After drying a few days, time to put her back together 
    • The hot exhaust light will come on not from just the cat being blocked, but it's just a temp sensor, and it's designed to warn you to not do things like park in long grass.   If you've been pushing the motor a bit, it can cause the light to come on.   Second if the cat is rattling, I'd suspect it's not blocked, but instead falling apart inside.   The easiest "fix" until you can get a cat put back in, is to unbolt your one, bash the rest of the insides out, and then bolt it back in.   For a daily driver/street car, I am in agreeance of put a cat in the car. If it were race car I wouldn't care if it were removed.
    • No worries at all 馃 I think the most satisfying things to make are the little bits that are just impossible to find or they're no longer manufactured. Generally I always try to replace parts with OEM wherever possible. This little project is also great because it'll never see the light of day, but strengthen these brackets so it's not just relying on the little standard screws in the headlight plastic. As soon as I saw the standard brackets and screws I thought, "well I'm not going to install with just the screws, the plastic tabs will just snap off". It's crazy how expensive everything has become yeah. But I suppose that's supply and demand; granted it's a lot easier to get brand new genuine parts these days which is fantastic 馃槉, I don't have to get totally reamed at the local Nissan dealer ha ha We sure are lucky we have all these manufacturers making parts these days, a few really great Australian companies too like Platinum Racing Products and Fit Mint Automotive, what a time to be alive 鉂わ笍 . I've got my eye on the RB26 head by PRP as mine has a very fine hairline crack, so that'll need to be addressed some time in the future. If you have any requests or odd things to make feel free to let me know and I can have a crack at making replacement parts 鉁岋笍
  • Create New...