Jump to content
SAU Community

Recommended Posts

Hey guys,

I am moving soon and have an important question about car storage. I am very worried about getting a hosue that has no car port or garage, How bad is leaving your car in the sun and rain? does it make it age noticably quicker? Is a car port much better then leaving it in the open? Does the sun damage in the interior?

any information would be handy.. thanks...

Link to comment
https://www.sau.com.au/forums/topic/60823-under-the-elements/
Share on other sites

Sun and rain most definitely damage the interior and the paint.

Sun dries out leather and also some plastics causing fading, cracking and brittleness.

Rain can carry nastive corrosive chemicals from the atmosphere which will fade and even pit paint. Cities with worse pollution or next to the sea are worse with this.

Unfortunately all cars will suffer to an extent as its not exactly possible to avoid it. Just best to minimise it by keeping your car under cover and cleaning at regular intervals. Sun shades for when parking on hot days are always a good idea (prevents people from seeing any inside goodies too).

Worst comes to worst, maybe look into car covers? No idea how feasible and effective they are as mine is always parked inside at night and undercover during the day.

Dont park your car under trees either thats bad as well. U get all the sap over your windscreen then your wipers dont work properly and u have to polish your windscreen,

Also parking under trees the leaves fall into your skuttle chamber and can cause rust becasue they slowley turn to mud seen it happen a fair bit even saw it so bad on one persons car that the whole front end was rusted out.

This is probably a bad case but after leaving my car out for a year ( not my choice ) my paint has faded and started oxidising ( too bad to polish out), rust has poped up, lots of shrinking of my r32 dash and trim around the rear quarter windows. The car was parked near the coast so that sea air probably wasnt real good for the car. If you have no choice buy a car cover. Theyre a pain in the arse but well worth it.

my car lives outside....it holds together well

Troy: you car is a R34 GT-R isn't it? In which case it will have relatively fresh paint anyway. Its when the clear coat layers start to break down over the years that paint starts to look dull and lifeless.

LW.

I reckon if you're going to have a nice car, you need a garage. Depends on where you live, but expect multiple breakins and even just shitty little kids keying it, etc.

For about 6 months I had my R33 outside in the QLD sun and the signs were starting to become obvious, although nothing happened to it like the above. 2-3 years like that and I know the paint may have needed attention.

Rain isn't a problem as long as the car doesn't have any leaks.. It's that tiny leak where the water always runs down and always sits somewhere hidden away that causes the probs.. That is where your rust will develop.

I bought a cover from kmart for $70 (just a standard "large" one).. it didn't scratch the paint or anything like that. I would be using that if its going to be outside for weeks at a time. If somebody starts ferretting around the car cover it might be a bit more obvious, its also a tiny extra security precaution.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm firmly on the "zero compliance is good compliance" for FUCAs. I'd be looking to solid metal joints even if the primary reason for having them is because they facilitate the twist in the arm. I have never been more happy with the way the front suspension behaves than I have since I got rid of the FUCA bushes. Even the thin little (short lived) poly bushes in the Whiteline adjustables have too much compliance for my liking. It probably won't be long before I have sphericals nearly everywhere, probably including both top and bottom arms in the rear, and I'll start complaining about the increased costs for dental work. But I will be enjoying the driving more, I'm sure.
    • Plus, you'll get great experience in bedding in pads!
    • I have offset Nismo brackets so the fact the gktechs can pivot is less important to me. I have 170mm JIC arms with bushings - but they provide no adjustment and I'm not sure whiteline eccentric bushings will fit them (I don't want to ruin the bushings currently in them to find out). Ideally I want something with bushings + adjustment; hence why I'd like to find a pair of these. Unfortunately they aren't easy to find.
    • @Vee37 How much do you really care about finding these pads again? If your pads are quiet, work well and produce minimal dust, really isn't that enough? If you are set on finding the exact pads again, I suppose I'd do something like this -  Visit your local Jax, find out what brand of pads they carry. If the Jax workshop you previously went to had the pads on the shelf, then you can almost guarantee it will be of said brand.   I'm guessing you don't have the receipt for the previous work and pads. Can you visit a Jax workshop and see if they can look up your previous job to see what pads were fitted?  Still no luck? Put your stalker hat on, find the staff that used to work at the Jax store and ask them. Talk to local workshops, try to find out where the mechanics went to. Talk to Jax workshops, maybe they relocated to another workshop. When it comes to mechanics, its a small world. You'd be surprised how easy it is to track someone down. If these ideas don't work, shit will start getting crazy very quickly.... You could find out every brand and model of pad that fits that car... and try them individually ticking each off the list if it wasn't the one you were looking for.... If you go down this path your going to want to learn how to swap pads yourself, it is very easy, takes minimal tools and space. If you have room to park the car you have room to swap the pads. Plus you have the advantage of making sure all the brake hardware goes back in so they won't squeal! 
    • You miss spelled bearings...
×
×
  • Create New...