Jump to content
SAU Community

Recommended Posts

SAU (WA) WASTELAND RULES 2008

These rules shall come into effect on July 3, 2008

Section 1

General Rules:

(a) While debating and discussion is OK and adds to the community, treat all members with respect and courtesy - We will ban any member(s) who make personal attacks, threats or mistreats any other member in anyway (discretion is up to the moderator/administrator at the time of the offence)

(b) Please refrain from posting meaningless threads, one word (or short) non-sense posts. This includes the Introduction section.

( c ) No Spamming - This includes useless posts to increase postcount, mass PM's and any mass advertising. If you wish to chat, use the WT thread stickied above.

(d) Discussion of illegal activities such as Street Racing, Piracy/Warez and other intellectual property violations are not allowed.

(e) No Porn, No full or partial nudity allowed. Please remember that people browse these forums from work or at home with young family members and please be considerate when posting pictures, links or other digital media. This is up to a moderators discretion, if you dont think they will approve then dont post it.

(f) Each member is allowed one login account. Registering with multiple accounts prohibited.

Section 2

Detailed Rules:

(a) Exercise common sense and be considerate toward your fellow users. Diversity of opinion and intelligent civil discourse is encouraged; by the same token, insults and “flaming” are not tolerated. Disagreeing with an idea of another community member is different from attacking that individual.

(b) Do not post off-topic. Please keep your comments consistent with the subject and purpose of the conversation thread. Deliberate disruption -- such as consistent off-topic and/or frivolous commentary -- will not be tolerated such posts will be deleted. Please use the WT thread stickied above.

( c ) You alone are responsible for the material you post. You will not knowingly post content or links to content that is libellous, defamatory, offensive, obscene, racist, abusive, that violates a third party's right to privacy, or that is otherwise inappropriate.

Section 3

The Rights of the SAU (WA) Moderator/Administrator Team:

(a) We shall have the right, but not the obligation, to monitor the content of the forums to determine compliance with all sections of this Agreement and any other operating rules established by us.

(b) We shall have the right in our sole discretion to edit, refuse to post, remove, or otherwise alter any material submitted to or posted on the forums. Without limiting the foregoing.

( c) We shall have the right to remove any material that we, in our sole discretion, find to be in violation of this agreement or inappropriate for any reason whatever without consent.

(d) We further reserve the right, in our sole discretion, to remove a user's privilege to post content in our discussion forums. Suspended members who re-register with new accounts will have those accounts deactivated without notice. Repeated attempts will result in our contacting your ISP with a complaint.

____________________________________________________________

Please makes you read and understand these rules, if you have any questions please PM one of the moderators or admin and we will answer you. It is up to you to make sure you have read and undertood them as these are in place from now.

The Team at SAU (WA)

Link to comment
https://www.sau.com.au/forums/topic/60840-wa-wasteland-forum-rules/
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • If you've only done the upper control arms on the rear, AND you have changed their length (by more than about 1mm) to set the camber you want, then you will definitely need/want to install traction arms also. Adjusting the camber arms on their own WILL introduce bump steer and make the car unpleasant to drive. Most owners have no idea that their car could behave infinitely better than what they put up with. I'm not entirely sure what the Stageas need, but I am thinking that unless you have massive front spring rates and pretty soft rear springs, you have waaaay too much rear bar. Oversteer city, in my estimation. Combined with possible excessive bump steer from maladjusted arms, that could be a recipe for nastiness. ATR43SS2 is not a highflow. It is an outright replacement turbo. It's a little bit bigger than the largest highflow profile that Tao does. Probably a solid 300rwkW turbo where the bigger highflows will be about 30-40rwkW less. Nevertheless, we're only talking about ~300 rwkW, which is well within the abilities of the stock ECu to run with a Nistune on board. I would do so without hesitation - and I will be doing so when I get my finger out and actually get the injectors and AFM installed. But, if you would prefer to drop a whole lot more money on the ECU side, then I suspect you're looking at Haltech. The Haltech fanbois here will all spout on about all the available engine protection you can have, that you can't have with the Nistune option. And they're right. But it doesn't really come for free either. You will spend more money on extra sensors and the like, plus the work to install them. If the engine was built and therefore represented a big investment to protect, then I'd say definitely do it. If you view the current (and forever into the future) shortage of replacement engines as something to prompt similar protection, then also, do it. If you see a destroyed RB25 as an opportunity to put in a Mercedes or other V12 (like I kinda do)... then your perception of the risk/reward might differ. These are good injectors. You can also get a "better" set of the same with more flow matching, for more $$. 1000cc is where you will want to be. You will need an R35 AFM and adapter tube if you want to stay with Nistuned stock ECU. Otherwise, if going Haltech, you can ignore. As for intercooler. Just about anything will do. You're only talking about ~300rwkW. Just put a big core in there. Be aware that return flows do add significant pressure drop and will cost power and will make the turbo work harder to achieve the same goals. If you can manage a proper crossflow, do it. I'm keeping my very good return flow because I'm only expecting to be in the ~250rwkW range, and will live with whatever outcome I get.
    • I have a heap that i have collected if you want some authentic ones still. Pm me if your interested!
    • Hey lads, reviving an old thread.  As an update, since the last time replied to this thread, ive done mostly suspension. Havent touched the motor except for maintenance. Though upon changing spark plugs, found out i had splitfires pre-installed! Updates: - Got me some stock airbox top cover and snorkel to fit onto the original intake. Should be free of defects - Bought a set of R34 GT-T brakes (not installed yet, going to rebuild + respray in champion blue + white 'Nissan' text) - Bought the last set of bilsteins from @Sydneykid and had them installed. Has been making some sounds on the rear but hopefully should be sorted out after this New Year break. - Regreased front caster rod bushings (poly bushes..) - Rear upper camber arms - Whiteline sway bars (BNF27Z 22mm + BNR11XXZ 24mm).  The rear sway bars are a bit short (ive read 50mm else where) but was still able to get them in.  Anyhows, I reckon suspension is sorted now. Maybe replace bushes (do have a set of front upper control arms from SK not installed yet) but should be okay for now. From now, I'm wanting to start working on the motor, drivetrain etc etc. Still debating on the order to go on and what to buy etc but: - ECU ( Haltech or Link ( Link states that it dont support A/T or AWD functions... Can anyone attest to this? ) - Highflow turbo ( ATR43ss2 ) - Intercooler ( Not decided yet, but cant find many good afoordable ones. Toshi says to opt for crossflow Japanese. Bit difficult this one, unless I get a returnflow Blitz from JJ? ) - Injectors ( Any recommendations ? I do have a nismo FPR ( Thanks SK ) ) - Seats - Tune by either Toshi or DVS To be fair, I did consider just keeping the stock turbo and nistuning it. Sat in a mates stock N, that had something like 200kw, and I reckon that felt more than enough. Maybe I should just go this route ahhaha. Too many choices.... Planning a trip down south, so wanting to just clean things up and make sure it gets to and from in one piece. Anything else specifically I should do before ? Cheers lads  
    • Must be for the car’s lucky charm 🤷🏽‍♂️ She runs fine, but it just seems to take about 1L less. Maybe I’ll have the oil sump dropped at some point to check if there is anything 
×
×
  • Create New...