Jump to content
SAU Community

Recommended Posts

Hey guys, im just getting a price off CES for a stainless steel twin dump pipe. Now these arent availible off the shelf because the wastegate pipe is 1.5" (inches) in diameter and that size isnt availible in stainless steel. Now, I am getting one made still, but i have to decide whether i go a little bit smaller in the wastegate pipe or a little bit bigger.

What you reckon guys?

Link to comment
https://www.sau.com.au/forums/topic/60994-ces-twin-dump-pipes-options/
Share on other sites

Do they make em in mild steel ? would be less prone to cracking & cheaper as well !!

I did a group buy a little while ago

Steel $650 HPC coated $800

Group buy price $530 and $650 HPC

You could try Trevor to see if he will match the same price

Thanks for all your help people, firstly i must say, the reason im wanting to go stainless steel is because the rest of my exhaust is stainless steel and if you go putting mild steel and stainless steel together you get what is called electrolosis (spelling :s) which is in a simple word, rust. and thus eating away at your exhaust system slowly.

Bigger it will most likely be :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, back in the day..... "race" fluids, which were essentially only really "high temp" fluids, used to absorb water more readily. So they really needed to be changed more often anyway. The coincidence of that being directly necessary along with it being what racers would do as a matter of course was just fine.
    • Does the high temp fluid degrade any different over time compared to normal one? That's one thing I've always been wondering. Because a track car is going to get the fluid flushed probably way more often than every two years and will see less kilometers driven. I would think the requirements are different. I'm running Motul RBF 600 in mine. Was recommended by my mechanic before a trackday and I've stuck with it since. Hasn't seen the track since but I've kept buying and using it for servicing anyway.
    • The brakes are all stock bar some DBA slotted discs and the EBC pads and braided lines. The car has brake ducts as standard but they're kinda pointed in the general direction of the brakes rather than really getting at the heat source. I guess I should hit it with an infra red thermometer after a session and see what they're at.  100%! Its just a curiosity more than anything. As I said, high temp brake fluid was such a track day rage back in the day. From people I speak to at the track and threads on here everybody has their own take on it but I'm not gonna scoff at spending a few more bucks.    OH, a quick side question - would you use brake fluid from an opened container even if the lid has been on? Eg, if you have a bottle that you opened last time you flushed, it's been tightly closed, is it still good? 
    • Nice, is there a post with the new 4" dyno curve?
    • The brakes are all stock bar some DBA slotted discs and the EBC pads and braided lines. The car has brake ducts as standard but they're kinda pointed in the general direction of the brakes rather than really getting at the heat source. I guess I should hit it with an infra red thermometer after a session and see what they're at.  100%! Its just a curiosity more than anything. As I said, high temp brake fluid was such a track day rage back in the day. From people I speak to at the track and threads on here everybody has their own take on it but I'm not gonna scoff at spending a few more bucks. 
×
×
  • Create New...