Jump to content
SAU Community

Recommended Posts

Forgive the newbie question, but what's a reasonable price for an R32 GTR front bar and bonnet?

I got careless and bent the front of my GTS-4 - oops :P I've got a quote from someone local with a GTR half-cut (they are a straight swap, right?), but it's a bit more than I was hoping.

Any ideas?

On a positive note, this gives me a good excuse to get that respray :rant: Now to pick a colour...

Link to comment
https://www.sau.com.au/forums/topic/61109-r32-front-bar-and-bonnet/
Share on other sites

  • 2 weeks later...

Ok, we've sorted that out ($350-400 seems to be a good ballpark figure)...

But no one has been able to give me a definite answer as to whether an R32 GTR front bar will fit without modification onto an R32 GTS-4. Some people say yes, others say you have to swap the front guards as well.

Can anyone give a definitive answer, preferrably someone who has actually done it?

X

I am in the process of doing this now...

A GTR bonnet requires hinges and modifications to the latch (or a GTR latch support).

The front bar will not fit unless you trim the front bar support or source a GTR front bar support. They do need to be squeezed a bit to fit - so make sure you have it done at a workshop that has done this before to ensure that it will look good.

You then have the issue of no grille... To fit the grille, you need GTR headlights as there is clips on them which hold the grille in place.

Bonnet $450-700

Bar $380 - $650

grille $150 - $250

hinges $20 - $80

latch $free - $50

headlights - $150 - $600

I am in the process of doing this now...

 

The front bar will not fit unless you trim the front bar support or source a GTR front bar support. They do need to be squeezed a bit to fit - so make sure you have it done at a workshop that has done this before to ensure that it will look good. You then have the issue of no grille... To fit the grille, you need GTR headlights as there is clips on them which hold the grille in place.

Thanks for the info. Looks like I'll have to talk it over with the guy at the smash repairs. Whichever way I go, it's going to cost - but if the insurance is subsidizing the first few thousand then it might be worth it.

X

I am in the process of doing this now...

 

A GTR bonnet requires hinges and modifications to the latch (or a GTR latch support).

 

The front bar will not fit unless you trim the front bar support or source a GTR front bar support. They do need to be squeezed a bit to fit - so make sure you have it done at a workshop that has done this before to ensure that it will look good.

 

You then have the issue of no grille... To fit the grille, you need GTR headlights as there is clips on them which hold the grille in place.

 

Bonnet $450-700

Bar $380 - $650

grille $150 - $250

hinges $20 - $80

latch $free - $50

headlights - $150 - $600

mr r32

i put the gtr bar on with out modification

also if you change the front quaters you will need GTR blinkers

"You then have the issue of no grille... To fit the grille, you need GTR headlights as there is clips on them which hold the grille in place."

why spend the money on the lights when you could just custom make some clips or brakets for them? or just not have the grill and make it look abit different

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • He made that comment in my thread - In my case the vents ARE to lower engine heat, when the car is not moving, which is the only scenario I have heat problems with the aircon on, sitting in traffic, on 40C+ days. I can't imagine a scenario that this NC needs any at this point in time. I do not know if it will actually make my cooling when the car is MOVING worse, and I sincerely hope that won't be the case. If it does, well, um, f**k.
    • Nice, thanks. Thats why I was asking, there'd been a fair bit of discussion in the E90 world about vents and where it makes sense to put one (ie, over the filters is not great as that is inline or slightly behind the struts and in higher pressure area). I struggle with air flow and pressures. It sill weirds me out that a radiator in the boot can work. 
    • Neither really Vents, when located in the right place, will lower the engine bay "pressure", as air has a path to escape, thus lowering the engine bay pressure, thus.....improving the efficiency on the coolant stack (read: IC, condenser, radiator) This is why the Blits vented bonnet on my 33 worked so well, the vent was in the front 1/3 of the bonnet, which put it right after the radiator  If the vents are to far back toward the windscreen, which is a high pressure zone, it can actually force air into the engine bay, causing higher pressure and effectively loosing efficiency on the cooling stack, like the fab of raising the rear of the bonnet, which does allow heat to escape, but only when the car isn't moving  There's heaps of cool "fluid dynamics" info out there, but, I'll attach a video of a 'Merican joint that focuses on "Miatas" as I found it when looking into vents for mine, they explain it way better than me  
    • Poor bleeding. That stupid damping loop in the plumbing that should be completely replaced with a braided hose. Just the first 2 that come to mind.
    • Forgive the potentially silly question but are the vents for bay temps? I've been toying with how to reduce my bay temps because man, it gets HOT in there and a small subtle vent somewhere I think might help. Or, maybe they're to assist with just the intake temps? 
×
×
  • Create New...