Jump to content
SAU Community

Recommended Posts

Hey guys. I have a set of magnesium forged monoblock racing rims that will suit all skylines GTS-Ts and silvias (s14-s15). They are immaculate condition. All rims but one have not one scratch on them. One has a very minor scratch in which can be literally buffed off.

I have fitted these to my R32 GTR before,and they fit quite well and have no dramas with traction/torque issues. They are currently on my S15 in which is posted in the cars for sale section.

*****these rims are 18inch and are lighter than Buddy Club QF's in 17inch******* for those who know what QF's are, then it should give you a good idea on how light these wheels are.... perfect for track/drift days.

NOTE: that these rims are listed on Takakaira for 95,000Yen per wheel new.

Selling at a bargain price of $1800AUD (no tyres)

F: 18 X 9J

R: 18 X 10J

5 Holes PCD114.3

Not 100% sure but itd be lucky if they weighed more than 2.8 kg each and thats talking about the rear rims (18X10J) ill weigh them on a tort scale and let you know when i can

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • https://www.youtube.com/watch?v=KyZDvZmvhik
    • You'd be better off digging a pit and standing under it to shoot it.
    • The easiest way would to be ignore the oscilloscope, grab a multimeter, and make sure all the main connections are right. An oscilloscope will give 99.9% of even technicians so much grief, as they have no idea what things should even look like on an oscilloscope. Which is also even more likely for someone who's first ever major work on a car is this If the battery volts are dropping down so low, the LDV will reboot the ECU, when it does so, it will drop out the start circuit. If this is occuring, the battery voltage should also come back up. Give it a few tests, even simple ones like when you're attempting to crank it, measure voltage from the engine block, to the negative terminal. You might find you've got really bad connections somewhere. My guess is the "new" motor has something like a shit starter motor, at which point, you can swap the starter motor from the old motor, to the new motor. Before I did any of the above though, I'd 100% confirm the battery in the vehicle. Most jumper packs are absolutely useless, especially if a battery has a bad cell for example. Also the new modern "jump packs" if you don't know what you're doing with them, you won't even get them into high current stage. So go back to basics, check the battery, especially with a known good one as a replacement test. Check ALL the wiring, this includes where they're bolted onto the battery, and bolted onto the starter motor. Check all the earth straps are on. Measure your resistances across your earth straps. A good check here is to measure voltage across the earth straps while you're trying to crank it. If you're seeing voltage, you've got high resistance joints! Oh, and once you've done the above, check the battery over again.
    • For most rotisseries, as Duncan has mentioned, you really don't want a full car on it, you want a stripped shell. And imagine how many more weeks THAT is going to add to working on the car...
×
×
  • Create New...