Jump to content
SAU Community

What's the Sunshine Coast like ????


Recommended Posts

I've just been looking at house prices on the net - there seems to be a fair few 'retirees areas'

Seems to me that Noosa is the most expensive, Then Moololaba, Maroochy and Caloundra - might be wrong though - Kawana sounds nice - Then there is Paradise somethingoraother

Like you said nismo33 - I think the best bet is to come up and take a peek around.

I'm thinking of buying a 2 or 3 bedroom place that needs some work on it - So if I dont' get a job straight away , I'll renovate myself, then sell for a profit and maybe do it again or perhaps by then I will have found a job or started a business.

Anyway - I am quite excited about this. There are lots of pro's and not many con's.

So when I move up, does that mean I have to support Qld in the state of origin ?? he he he he :):D

your pretty much spot on with the houses with your pricing, kawana island is the newest place on the south end of the coast, close to everything and mooloolaba & maroochydore are all 5 mis drive away, beaches in every suburb, just gota head towards the water. look at all areas before buying, and get info on the particular areas your thinking of buying (i.e. flood zones etc etc) there are heaps of retirees areas but also plenty of new housing areas as well. other places towards caloundra way are pelican waters and bell vista estate, both these areas are new areas but as far as i know pelican waters housing is an expensive area. but if u are looking at secondhane housing to reno, there are plenty around the place ppl are always selling, you will just have to find the rite 1 for you in the rite area.

Lived in Caloundra (Kings Beach) for 12months, beautiful spot!

Very laid back, plenty of beaches both open and protected, full of retirees, tourists and it gets chocca's during summer which gets a little annoying for parking.

Nightlife is obsolete, you'd head to Mooloolaba/Maroochydore for that.

Only an hour from Brisbane and 45 from Noosa so its in a good spot.

  • 2 weeks later...

i was born and raised on the coast...........

What is the popluation like ?? Old , young, medium ? Old and young, not much in between. places like caloundra and budrim are pastures where old people from the cities down south retire. a mate in caloundra lived in between 3 retirement villages (golden beach)

How is the economy and industry? Economy is black, lots of cash in hand work which helps drive legit business down. industry is hospitality and tourism.

What about Jobs ? what about them? there are none. 2nd worst(?) unemployment in Australia. It's a nice place if you like the dole. Hospitality is good though.......if that's your thing

House Prices ?? too dear cause of people from vic buying up

Are the people nice ?? people too laid back to care, it's indifference not a genuine nice nature.

Transport ? non-existant. that includes sunbus. Shitebus is a better discription. the roads are congested cause everyone has and uses a car. if you dont have a car you're no one important and a write off, hence the crappy transport.

Fishing ? great, i'm not into it, but it's definatly there.

Girls / Women ? Most of the local women will live at home till about 24-26. my 24 yearold sister says that most of the girls from her grade are on their 2nd/3rd kid. most piss up their part time at Wollies wages at Fridays on the weekend. Coolum is the single mum captial of Australia (statistically) which is evident by the number of 4WD's around the place.........the carpark to a school in the area looks like an offroad meet.

Nitelife ? Moolooabah, full of allsorts including a high concentration of VVankers

Things to do ? Places to see ? Smoke drugs, surf, collect dole payments, go to fridays, have kids, laps at moolooabah etc

:cheers: yes i'm quite cynical about the place...............unless you're into surfing and hospitality then it's definatly not the place to be when you're young. i got out and have never looked back.........great place to be raised though and to have a holiday break

BMan, just do it......the coast is growing, steadily, reflected in housing prices and conditions and the increasing pay packet. Given that the coast is structured to support the retired age group, you'll find a concentration of services designed to supprot. Ladies, tend to be snobbish, ticket on themselves...at least down around mooloolaba way, sorry to whoever I offend, buts thats the cold hard truth! lol

The regional plan calls for light manufacturing type industry south to Caloundra and heavy industry from Caloundra to Pine Rivers/start of Brisbane. New/young home buyers are being pushed further west from Brisbane, heading out towards Ipswich/toowoomba way.

As for entertainment, I reckon you make your own fun, regardless of the places around. As pointed out, its only an hour or two for a run to Brisbane or the Goldy if you forget why you moved to the Sunny coast.......

cheers

i'd be cautious of it....................inital sales of houses are good but the occupancy rates are quite low. a developer will advertise how quickly his flats are selling out but he wont point out that the customers are investors and holiday makers and the resale of them is crap.

have you thought about the hinterland? bigger properties out there, just a bit out the way but some people dont mind that

just come hear and make your own mind up B-man, u obviously dont like the coast as much as where u are now "the_paladin". compared to sydney he wants a change of pace and the coast is a good place for that life. anyway, he will love it once he stays here for a bit. u make it sound like its the ass end of the world, and il tell you i can think of a million places worse off than here to live thats for sure.

From what I can gather , after speaking to various people and reading Council Planning docs, etc - The Sunny Coast has just been through a bit of a boom over the last few years. I don't think it is the same as it was say 5 years ago. I don't know when the_paladin last visited the area....

I do plan to come up and sus out the place - see if I like it -

I will probablly reant for 6-12 months to make sure - then buy a place if I think I will stay.

But from the sounds of it - seems ideal

Thanks for all the comments (positive and negative - they all help)

Sorry, didnt know you were from Sydney............or that you were a bit older than the adverage age on SAU

taking that into account, the coast isnt that bad a place to be. As it was said earlier, you move there with money, not to make money. i've lived in both sydney (ryde) and the coast, they're very different. it's a good change of pace (why i moved to sydney) it's just a bad place to be when you're young.

House prices are going to come down though. they cannot keep climbing, that becomes inflation. they eventually level out and drop in price. lots of people will move to the coast, which will keep them steady, but it's going to run out soon...........they're building em faster than the population is growing.

and the population is growing faster than they're building the infrastructer to cope with it.....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So I mentioned the apprentice, @LachyK helped take the bonnet off. We just undid the nuts on the hinges and unclipped the gas struts, then pulled the bonnet back a little as the front was catching on the front bar.  I had a good look at everything today and have removed the rams, repaired/reset the hinges and bolted it back together like it never happened. I'll do a separate write up on the repair, and I also removed the poppers from the Fuga today too to save grief down the road.....as said above it is at least $5k to repair retail. I'm also happier about my ability to prepare a race car, and less happy about Nis-nault's engineering (I can hear @GTSBoy sAfrican Americaning) because the top hose of the radiator didn't slip off.......it snapped clean off. By practice I put the hose clamp hard up against the flare on a neck to make it least likely to ever move (thanks @Neil!). I guess that puts a little more pressure on the end of the pipe as it is further away from the rad, but still, that is pretty shit. I've put it back on for now as there was a fair bit of neck still there, but obviously there is no lip on the neck any more so I don't think I'll track it again until I have a new rad. Speaking of which....more research required. It looks like Koyo makes a standard size radiator in ally which I'll grab in the meantime, but I really want something thicker so might have to go custom in the medium term (ouch) Coolant still needs a refill and I have the pressure tester on it over night, but other than a wash down of the engine bay it seems alright. And @MBS206 noted something noisy on the front of the engine and I think I agree....time for a new accessory belt and tensioners I think.
    • our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
    • What are we supposed to be seeing in the photo of the steering angle sensor? The outer housing doesn't turn, right? All the action is on the inside. The real test here is whether or not your car has had the steering put back together by a butcher. When the steering is centred (and we're not caring about the wheel too much here, we're talking about the front wheels, parallel, facing front) then you should have an absolutely even number of turns from centre to left lock and centre to right lock. If there is any difference at all then perhaps the thing has been put back together wrongly, either the steering wheel put on one spline (or more!) off, and the alignment bodged to straighteb the wheel, or the opposite where something silly was done underneath and the wheel put back on crooked to compensate. Nut there isn't actually much evidence that you have such a problem anyway. It is something you can easily measure and test for to find out though. My money is still on the HICAS CU not driving the PS solenoid with the proper PWM signal required to lighten the load at lower speed. If it were me, I would be putting either a multimeter or oscilloscope onto the solenoid terminals and taking it for a drive, looking for the voltage to change. The PWM signal is 0v, 12V, 0V, 12v with ...obviously...modulated pulse width. You should see that as an average voltage somewhere between 0V and 12V, and it should vary with speed. An handheld oscilloscope would be the better tool for this, because they are definitely good enough but there's no telling if any cheap shit multimeter that people have lying around are good enough. You can also directly interfere with the solenoid. If you wire up a little voltage divider with variable resistor on it, and hook the PS solenoid direct to 12V through that, you can manually adjust the voltage to the solenoid and you should be able to make it go ligheter and heavier. If you cannot, then the problem is either the solenoid itself dead, or your description of the steering being "tight" (which I have just been assuming you mean "heavy") could be that you have a mechanical problem in the steering and there is heaps of resistance to movement.
    • Little update  I have shimmed the solenoid on the rack today following Keep it Reets video on YouTube. However my steering is still tight. I have this showing on Nisscan, my steering angle sensor was the closest to 0 degrees (I could get it to 0 degrees by small little tweaks, but the angle was way off centre? I can't figure this out for the life of me. I get no faults through Nisscan. 
    • The BES920 is like the Toyota Camrys of coffee machines. E61 group head is cool, however the time requirements for home use makes it less desirable. The Toyota Camry coffee machine runs twin boilers and also PID temp control, some say it produces coffees as good as an E61 group head machine.
×
×
  • Create New...