Jump to content
SAU Community

Recommended Posts

I just got my car back from the compliance workshop today and I took a look at it. The back child anchor points isn't even put in. The bottom plate has been secured underneath the parcel self but the actual anchor hook thing isn't screwed in from the top. By the looks of it they have drilled behind the speaker grill and then they realised that the anchor points won't fit behind there and just left it as it is. Also they have drilled one of the anchor points off centred. How much can it be off centred? They have also drilled from the bottom up and obviously hit the window because now there is a scratch mark in my rear tinting on both sides. Is this unavoidable as drilling upwards is hard or should I go back and see what they say?

Link to comment
https://www.sau.com.au/forums/topic/61486-compliance-workshop-troubles/
Share on other sites

I just got my car back from the compliance workshop today and I took a look at it. The back child anchor points isn't even put in. The bottom plate has been secured underneath the parcel self but the actual anchor hook thing isn't screwed in from the top. By the looks of it they have drilled behind the speaker grill and then they realised that the anchor points won't fit behind there and just left it as it is. Also they have drilled one of the anchor points off centred. How much can it be off centred? They have also drilled from the bottom up and obviously hit the window because now there is a scratch mark in my rear tinting on both sides. Is this unavoidable as drilling upwards is hard or should I go back and see what they say?

Well you can't drill down unless you remove the rear window

Yeh i kind of figured that he will have to drill up and its unavoidable so i'm not so worried about that. What's worrying me is how close to the centre of the seating position the anchorage point has to be because I remember hearing it has to be within a certain area near the centre position. Does anyone have pictures of how their's is done?

yeah, i just did mine..

as close as possible to the centre of the seating position, but like you say thats nigh impossible because of the speaker holes... but it had to sit a fair way back as the speaker holes are in the way.

I rivetted twice each point to hold the bracket in.. sits just behind the speaker cutouts (I had no speakers). And even if I do say so myself, I did a ****ing awesome job :-D

Will post a pic next copule of days for you..

to do the job right you need to make up brackets that bolt to the shelf and protrude up to clear the speaker then back down again and bolt down to the shelf .....these are supposd to go directly behind the headrest's

Yeh i kind of figured that he will have to drill up and its unavoidable so i'm not so worried about that. What's worrying me is how close to the centre of the seating position the anchorage point has to be because I remember hearing it has to be within a certain area near the centre position. Does anyone have pictures of how their's is done?

I was told within 40mm of the centre of the seat

In my opinon marks in the back window is lazy. You have to drill up, but just use a short drill bit or use some timber as a depth control. All these places charge top dollar and just slap em through. I would take it back. If you want something done right just do it your self.

well there must be some conjecture.. as I have seen them both right behind the seat, and right behind the speaker holes (i.e. right back towards the glass).. so there must be some different interpretations... Either way they're being passed with both.

I just copied GTR V's points (thanks again), as his got through fine. I hope mine are in the right position, as buggered if I want to do them again!

I think the key is the "centre of the seating position" rather than how far back they are... because i have seen them in the two positions regularly.

I don't know how you could manage to scratch the glass, but you'd have to be trying pretty hard.. and using the world's longest drill bit.

like duncan says.. not a bad idea .. if its SEVS its the workshop's responsibility to get it right.

Anyhow, took a few pix of mine..

the first photo shows how its rivetted in. Hopefully I've done it right, as I'm just playing it by ear here.. Its very solid.

The 3rd shows the positioning there.. I built another parcel shelf, and to hide the ugly speaker holes until i get some in the back there.

You can see in the 2nd photo in the another car I just picked up over the weekend. Interestingly enough on that one, points are back rather than right up against the seat.. yet in my mate's GTR they are right up against the seat. Its almost like 50/50.

So bah, who knows.. we'll find out when i meet an engineer.

It's under 15 year old rule. I'll try to get some pics to show you. Thanks for your pics predator, mine is wayyyy back against the back window. They drilled through the edge of the speaker grill so there a hole there that I can just feel when i reach all the way back. My tinting is very dark so I don't know how I'm going to take the picture from the outside, but I'll work something out.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update Issues 5 (plus #4) - 10 After making a claim about issue #4's missing part, DeAgostini Japan sent a whole new issue #4 and it arrived about 2 weeks after that. That was back in early March. It took another 4 weeks to receive issues 5 - 13 though. This update is for issues 5 - 10. Ove the 5 issues the front left suspension and most of the engine have been completed. The quality of the castings and fit of the parts is quite good, it seems better than DeAgostini's BNR34 Skyline GT-R from the Fast & Furious 2 movie, which (to me anyway) doesn't seem to have as tight tolerances or quite as accurate castings.  Each issue has a lot of info about the 1989 - 1993 Skyline range and other Nissan models from that era, but the focus is on the BNR32 Skyline GT-R Nismo and the various racing it did in Japan, Europe (Spa 24hrs) and of course Australia. I've included some text translated with Google Lens in some photos and will add to them if there's anything worth including. 
    • If it's for a SR20, make sure it's not the American Poncams, might as well call them Poocams. Had a set in a friend's car, all scuffed up after a few track days. Like the metallurgy Tomei USA used is junk. Went back to JDM OG Tomei Poncams, no issues till now.   Tomei USA is not the real OG Tomei.   Random rant over, fk the US of A, bunch of c u n t s. 
    • Most of the industry in North America either runs on Siemens or Allen Bradley. I have two redundant S7-1500's on my desk right next to me for simulation. Siemens has been losing ground though since Stuxnet, as cybersecurity is a big thing. In my line of work that is federally regulated, you must by law have a cybersecurity management program in place and its audited and inspected every so often.  I work with Emerson PLC's daily (RX3i's) and have done large biogas/refinery projects with their DCS's. Their PLC's are somewhat OK minus the way they do PLC redundancy (You have to download on both PLC's separately every time you make a change )  As for their DCS's... you'll be limited financially first before anything else stops you. Costs are exorbiant at roughly 10x what it would cost you to do with any other system (e.g AB PAC).  1990's, those suckers are brand new haha! Kraft-Heinz (An old client when I use to work for an ESP) still runs Siemens TI505 PLC's from the mid 80's. Ohh how I don't miss working with those... you could only do a certain number of online downloads until it's "Change" buffer would be full and you would then need to go offline to do a full download. There was no warning of when this was coming up and it generally would happen when you would go in at 2am to make changes before production -_-.     
    • Unfortunately, not only is that not the case, one of the main "Selling points" of safety over comms is they clearly state in writing that there's no need to segregate safety networks from non-safety networks. It always gets intermingled with everything else on an ICS/OT network. 
×
×
  • Create New...