Jump to content
SAU Community

Recommended Posts

I wanted to buy a few things from nengun though i've been hearing that there are taxes and whatever charges when the stuff arrives!?!

Can this blow out the price of the item considerably?

I'v also seen somewhere on the forums that he goes to the trouble

of wrapping the stuff up in wrapping paper?

And i've also heard that it's unlikely to be picked up by customs?!?

If anyone could help clear this up I would be most greatful as I'm keen

on his products/Prices!

:P

Link to comment
https://www.sau.com.au/forums/topic/61538-buying-from-nengun/
Share on other sites

yes mate, as you may be aware when you are importing parts from overseas, those parts are subject to import duty and GST. it's simple factor in the cost of duty and GST to your budget and if you reckon the price is still good, buy it. if the taxes don't get levied when your parts arrive consider it a bonus. even better instead of posting this stuff up here, read through the many "i want to defraud customs" and "i want cheap parts" thread that have been posted in the last few months.

/Edit: Farrrrrrrrrrrrrrrrrrrrrrrrkoff e-manage!

Guest two.06l
i know a lot of ppl have had good experiences with nengun, personally i found the communications to be pretty lacking, slow to reply, and he seems to be out of the office a lot ...  

having said that, i'm sure a lot of people have had great experiences, this is just my 2c worth

same here.

woooh - another nengun thread!!

Seriously - Brent(nengun) is a good supplier and will do his best so you can avoid paying any duties.

It depends on what you are after.

smaller items like gauges, ecu etc... will have a better chance of getting through customs than larger items like intercoolers, rims etc..

Also, some items may be exempt from any duties but none are exempt from gst. Ask Brent about this and he will clear it up for you.

Most of nenguns stuff is at a great price and if you are unlucky enough to be stung by customs then you are probably still better off than if you purchased locally. I think the duties tax is about 15% and gst is about 10%.

It is true that brent is known to be slow to respond to emails but once your item is away he will keep you informed.

A friend of mine(wink) got a power fc from nengun for $1100 delivered and it arrived gift wrapped within 10 days of payment without any further duties or taxes.

mmmgtir is correct in saying that there are many threads on importing parts and there is also many threads on nengun. you should have a good search around the forum for more info.

:rofl:

Thanks guys, that helped a lot!

So , really theres a good chance that things could slip through

customs!?!

And he also goes to the trouble of wrapping it up to look like

a gift? I guess that if customs see this they will not put any

fees on it!?!

Thanks Again guys you've really helped me out! :P

Back to the site to oreder! :aroused:

I've ordered an avcr from nengun, he was good at responding to my emails and i got the item 10 days from when it was paid with no extra charges at all. All in all i would definitely buy from him again (save me 200 off rrp in oz). Also i've heard that stuff like power fc's etc are free of duty because they fall under some clause.

I've heard many things about Nengun, mostly good, although my personal experience with them was a little dissapointing. I sent them a couple emails (over a week apart from each other) wanting to get a quote for a Power FC in December but never heard back from them unfortunately. I ended up going through Greenline instead and found Jason very helpful. He answered all my questions within a day or so, gave me a good price and organised to send my order after I arrived home from my holiday (rather than it arriving while I was away) without any problems. I received my Power FC earlier this week and would have no hesitation in recommeding him to anyone else or personally using his services again.

With regards to customs/GST etc, as was said earlier, you should definately factor in these costs where they are applicable before deciding to go ahead with your purchase. More often then not, you probably won't have to pay them, even though you usually are obliged to do so.

I've heard many things about Nengun, mostly good, although my personal experience with them was a little dissapointing. I sent them a couple emails (over a week apart from each other) wanting to get a quote for a Power FC in December but never heard back from them unfortunately. I ended up going through Greenline instead and found Jason very helpful. He answered all my questions within a day or so, gave me a good price and organised to send my order after I arrived home from my holiday (rather than it arriving while I was away) without any problems. I received my Power FC earlier this week and would have no hesitation in recommeding him to anyone else or personally using his services again.

With regards to customs/GST etc, as was said earlier, you should definately factor in these costs where they are applicable before deciding to go ahead with your purchase. More often then not, you probably won't have to pay them, even though you usually are obliged to do so.

Yeah I've emailed brent on a few occations and the response was either late or non existant... This worries me because to me, it reflects

on his service. Either way I have mostly heard of good things and may

still give him a go, staring with some cheaper items!

Anyway thanks a heap guys!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, this is probably where a wiring diagram and a multimeter come into play.
    • I can say to anyone thats doing this; having done a number of R clusters; just be careful if its an unknown cluster.  It takes a bit of force to pull up; but if it feels excessive then its probably stuck. I've had this and pulled the entire hair spring out; and I can tell you; its not easy getting the correct spring replacement with the correct inner diameter and winding. In my case someone had used some sort of adhesive to stick it to the spindle and it pulled the whole spindle out; which the force seperated the hairspring from the spindal and caused it to deform.  You may have to clean it (IPA); or in my case if i'd known i should have used some sort of solvent on it.  Also check out Cruizin Central on eBay. He does all sorts of dials; and you can email him with any custom designs you want. So if you want like certain logos etc...he'll send you a mock of what it will look like then you accept the order and he'll take care of the rest. Fantastic dials and he can do basically any design you want. 
    • Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
    • Ive converted a few clusters for the R33 with 320km/h dials. On the back there are some pads which can be bridged or unbridged (using solder or wick braid) to calibrate it. There is one bridge which is for MPH <> KPH; and there are combinations of bridges to offset it. There is probably a diagram  For example; this is my conversion for a 180km/h dial to a 320km/h dial (I put custom GT-R dials on it with the GTS25t layout) If you have J2 soldered (assuming the S clusters have a similar config to the R clusters); you may need to remove that solder
    • Back on topic 😉, these are some of the notable pages from the booklets that are supplied with each weekly parts update. I never knew the BNR32 test mule car had an S13 Silvia front end... *Edit: On closer inspection the test car still had the R32 body, but only the front end had Silvia panels etc.
×
×
  • Create New...