Jump to content
SAU Community

Recommended Posts

  • Replies 77
  • Created
  • Last Reply

Top Posters In This Topic

Burns, midnight is correct. The plate and id on the bonnet cannot be seen so if you remeber the time you took those pictures you might be able to find out who was petrolling that area at that time, it could come in handy so try to remember it! (Be specific when stating those things, time/date/area). Good luck mate! =D

Burns, midnight is correct. The plate and id on the bonnet cannot be seen so if you remeber the time you took those pictures you might be able to find out who was petrolling that area at that time, it could come in handy so try to remember it! (Be specific when stating those things, time/date/area). Good luck mate! =D

That may be true, but look again - there is an independent witness who could possibly verify the rego or police vehicle ID number and hence solidify the ID of the person driving the police vehicle. Also, DO NOT show the police the pic at all. Wait til you have asked him the question and got him to state that he has never crossed the centre line, and then spring the picture on him in court. The judge will have little choice but to dismiss the case based on the police officer's lack of credibility (basically, lying).

Go for it and good luck.

hahahahahaha, as always.... there is a something that can be referenced from the Simpsons

if i may bring everyones attention to exhibit A: Lionel Hutz

"Hutz: Now Mr. Nahasapeemapetilon, if that is your real name.

Have you ever forgotten anything?

Apu: No. In fact I can recite pi to 40,000 places.

And the last digit is 1.

Homer: Mmm... pie.

Hutz: Well if you never forget anything. Tell me this. What color

tie am I wearing? (turns around)

Apu: You are wearing a red and white club tie in a half-windsor knot.

Hutz: Oh, I am, am I? Is that what you think? Well if that's what

you think, I have something to tell you [ugh]. Something which may

shock and discredit you [ugh]. And that thing is as follows

(as he finally undoes the whole tie). I'm not wearing a tie at all.

[jury gasps]

Apu: If I am wrong about that. Maybe I am wrong about Mrs. Simpson.

Hutz: No further questions.

[Hutz raises his arm and the tie is sticking out of his sleeve]

"

:):cheers:

Thanks for the some times useful replies.

I will only be using the unedited photos straight out of the camera. I was actually looking for a for CSI style digital enhancement to be able to read the numberplate, car id or see the driver. But the other work is most entertaining.

The random farmer is my old man so not really an independent whiteness. He now has a gut ake from laughing at the incriminating photos.

I will take the how can it be justified that I get fined for it when a cop car dose it too. It must be safe. I also have a few other strong arguments and can get written statements from a few people stating that the nature of the corner dictates that it is natural and safer to straiten the corner.

The tyres are on wheels I borrowed to put on the car for a few weeks while I was waiting for my new wheels to arrive. My stock 16 where getting close to unroadworthy and I didn’t want to lash out for tyres to put on them when I was getting new 17’ in a few weeks.

well if you are relying on "but the cop did it" to get off .. it's not worth pursuing.

It's like saying "well that minister went and robbed a bank, therefore I can too " ..

The excuse "but somebody else was doing it" kind of means nothing in court dude..

Again, just because "it was safe" won't get you anywhere as well, as you broke a listed road rule.. I could say I was going 10km/hr over the limit because it was dry and nobody around - again that's not going to get you off anything when it comes to these things

Too bad about the fine some cops just instantly spot any import and think "omg this guy/girl is up to no good cause their car goes faster and has different wheels!!" like omg guys get a grip its a car like any other (well almost..) doesnt mean they have to pick on us!!!!!!! grrr...

bahahah at ur pic pantae!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Yes there is a front and back insertion point on each side, each point is tubed with supports into the car and tied to the cage/ floor mount point
    • Is the jack stand system tied into the cage somehow? Upgrades look goooood 😍
    • Big updates, tons of work and $$$ 
    • it takes so long to get things done but ... they are nearly there and we hitting the track soon again  So - at Perth Festival of Speed the car unfortunately had a decent off, wasnt me driving, wasnt the person drivings fault. Long story short car got sent very fast towards the wall without the control on throttle from the driver input and a disaster was averted but there was damage that needed to be fixed - carbon busted and alot of bent bits The splitter got munched and had to go back to get fixed - took a bit to get it there, fixed and back but got a surprise package when a new double element higher DF splitter came back - nice surprise !  and first person to have one     At a car show I took the car too some punks stole one of my carbon indicator blanks and stomped on the other so had to get a new set of headlight / indicator combo from tops stage so got front fender vents as well to put in the order     While all this was happening the new MCA golds turned up and did some fiddling around with those   Put in the flappy paddle system and clutch lockout wiring/ system   We have also put shorter gearing in top top it out at 300 kmph in 6th gear  where previously I held 5th to 282 at SMP and 277 in Perth   Looking for better control and faster acceleration     I wasnt intending on doing pedal box I was managing with the brake master replacement system I had going on and adjusted std pedals but on applying the clutch switch to the old system we found the *insert technical word here * bar that goes from the pedal to the master was bent about 40 deg and about to snap = lucky find otherwise be a bad bad time - discussion was had about getting a custom bar built to withstand the load but in reality it was time      making any suspension, wheel or anything adjustments to date has been a nightmare - aero off, adjust, check and repeat - time consuming and hard - short of going full airjack system we fashioned some external manual car lifts this will make life a million times easier     All the bent framing, some intercooler pipes and other has been fixed and replaced and after 6 months I finally have the car back at home in my control so its get to work on it, set ride heights, wheel align and will start track testing again soon   So ultimately other than a few flashy bits nothing actually looks likes its been done but in reality alot has. Typical   We'll see how all this goes        
×
×
  • Create New...