Jump to content
SAU Community

Help Needed Urgently

Jonneh Bravo

By Jonneh Bravo,
in Australian Capital Territory

 Share

Recommended Posts

Jonneh Bravo Grand Master

Jonneh Bravo

Posted
Posted

hi guys i took my car into an auto electrician to see what is wrong with my air con. he said it is a wiring problem under the dash. I NEED A CAR MANUAL FOR AN R32 FOR HIM TO FOLLOW AS IT HAS THE WIRING DIAGRAM IN THERE. If u guys could help it would be great i need it in the next hour please.

Dont want to sound to pushy :kick:

Link to comment
https://www.sau.com.au/forums/topic/61900-help-needed-urgently/
Share on other sites
Sinista32 Grand Master

Sinista32

Posted
Posted

Not Happy Folks - I Checked to find my Genuine Nissan GTR R32 workshop manual CD missing from my Owners manual, out of the glove box of my ride. I have checked with AudioTech Tuggeranong and Integra's who both have stated they have not got nor seen it.

If by chance I have leant my CD to you, and have suffered amnesia, could you please return it. Thanks

It's hard to help other R32 skyline owners out with it missing.

Sinista32 Grand Master

Sinista32

Posted
Posted

Wiring diagram printed (A3) and handed to Jon a few minutes ago. Hopefully it will help.

You guys prolly know but for those of who didn't http://www.gtrcentral.com/technical/e-manuals/

Works a treat.

A special Thanks to GZ_R33 for the www.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Lock up the old for sale / wtb threads.

      By Duncan 路 Posted

      Ha, I've never pressed the X in all these years incase it removed the notification for all Admins
    • Duncan
      Blue/grey smoke after idle

      By Duncan 路 Posted

      I don't know, I've never done it that way, but 1. While it is an interference engine, there is still clearance between the valves and the piston at all points in the regular timing cycle 2. There is not a lot of distance before you can't catch the top of the valve stem any more I don't know if 2 is greater or less than 1. But 3. If it doesn't work out you are f**ked, engine is coming out to disassemble so it is a big bet.
    • Duncan
      Unpeeling the Orange

      By Duncan 路 Posted

      Semi slicks are horrible for road use, just use a high performance road tyre unless you really need the maximum grip. Noisy, unpredictable (amazing, until they are not), expensive due to very high wear and not good in cold and particular wet. And yes, it is a thing to store cars on stands instead of tyres if you know they are going to be parked up long term.....but who ever realises that a short park is going to stretch into years before it is out again!
    • MBS206
      Unpeeling the Orange

      By MBS206 路 Posted

      I know in Australia you'll definitely get above 30c. Parked in the shade in Summer you'll be above that. 馃槢 But in cooler climates, you might get that warm driving on the highway for a bit, but you'd never get to full heat temp. I'll try and find some of my historical tyre temps between Aus summer and winter (be aware immin the warmer area of Aus too.)
    • sunsetR33
      Blue/grey smoke after idle

      By sunsetR33 路 Posted

      I get that taking off the head is best but that's a bit much for "just" valve seals. I was just under the impression that one would be able to rotate to TDC and be able to temporarily drop the valve without losing it and effectively having to remove the head to then recover it. I never knew people actually pushed rope into the cylinder to do valve seals hahaha So just to confirm, just going to TDC will not work? In that case I know when I do valve seals I'll maybe just remove the head and do some other things while I'm there, or just wait until I do an engine build.
脳
脳
  • Create New...