Jump to content
SAU Community

Recommended Posts

Hey guys,

before you tell me to read the E-Manage thread in FI.. let me start by saying that I've read it and am familiar with what it can and what it cant do and I have decided if its suited or not to my particular application.. The info i'm chasing is.. who can tune it in Perth? And those in WA has had experience using E-Manage; who tuned it for you, how much did it cost?

kthxbai

:D

Link to comment
https://www.sau.com.au/forums/topic/62111-e-manage-issit/
Share on other sites

Fane - indeed.. coz im not aiming for huge power (260-270) for sure so im fairly certain that the E-Manage will have no problems getting me there.. yes i know piggybacks would probably get the same result (SAFC + ITC) but since the E-Manage has become cheaper and cheaper i feel its worth a second look :rofl:

Link to comment
https://www.sau.com.au/forums/topic/62111-e-manage-issit/#findComment-1172662
Share on other sites

if my memory is serving me well...... i think xspeed had a red s15 which used emanage and it was auto but had a few probs with it?

adrian :P

yeah Adrian the earlier versions had problems mostly with coilpacks but its been awhile and the latest version apparently deals with the problems in both Nissans and Evos

Link to comment
https://www.sau.com.au/forums/topic/62111-e-manage-issit/#findComment-1175892
Share on other sites

Not sure the latest firmware did fix the coilpack problem, as I've still heard of people having trouble. Just play it safe and put the zener diodes in like I did, I put some details in the e-manage thread.

That way you can also drop the trigger voltage down closer to the factory pulse voltage.

It's running fine with my auto transmission, never had any trouble with that aspect.

Link to comment
https://www.sau.com.au/forums/topic/62111-e-manage-issit/#findComment-1175943
Share on other sites

Michael - thats nice! what other mods do you have?

Thanx...current mods are Hybrid FMIC,Hi-flowed Turbo,E-manage,Z32 AFM,AVC-R boost controller,Walbro HF pump,JASMA 3.5" CAT back and dump,Apexi N1 adjustable coilovers, whiteline adj. sway bars front and rear and camber adj front,...sitting on the bench...800cc SARD inj, TD06-20G,custom manifold/plenum,dump pipe and fuel rail.

Cheers,

Michael

Link to comment
https://www.sau.com.au/forums/topic/62111-e-manage-issit/#findComment-1176934
Share on other sites

my bench is looking nice at the moment....but can we combine plz....i would like your sards and the custom mani and plenum and fuel rail :) hehe

 

nice figures dood....like i said before....interesting...emanage....

lol...thanx fane ;-) ...wouldnt leave me much on my bench dude, just a huffer that wont get the juice to go....i know where to come lookin'...i is local to you too...but yep often under-rated the E-manage but definitely good for people limited in choice having auto transmissions...but then again wont have my E-manage for much longer if plans work out....will stop whoring the thread now!

Cheers

Michael

Link to comment
https://www.sau.com.au/forums/topic/62111-e-manage-issit/#findComment-1177024
Share on other sites

if you are making large changes from the stock mappings it will affect your auto operation to some degree . it may be acceptable to you or it may not

i have had no issues with my auto operation in over 2 years at the above power levels, shifts have always been spot-on and tight, no flaring,nada.....maybe its coz i drive it like grand ma ;-)

rev-limiter wots that...babababa...ohh THAT!!

Cheers,

Michael

Link to comment
https://www.sau.com.au/forums/topic/62111-e-manage-issit/#findComment-1177064
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Another question sorry, what stainless do u use in the turbo external WG plumb back piping? Is it 321, 316 or 304?
    • Right, its been a while for updating this car, but I made some small but important progress today. In the end I bought an Ecutek dongle from the Australian distributor Tunehouse (for local hardware support) but have gone with a remote tune from Racebox in the US (because they have done millions of these, and I could not find any tuner where I could access the tune anyway as they are all password locked). The App is reasonably easy to work with, but the PC software reminds me of Haltech's ECU Manager that you need to use with the Plat Pro ECUs, it is a nightmare.  Anyway, I sent the details over, got back a tune file and a request for data logs. I finally got a chance to access a private test track today as they want redline logs in 3rd and 4th, and have sent them back for the first round of reviews. The main difference in the tune is going from 1.0 (stock) to 1.3 bar (19psi), although I'm sure is a lot of other stuff in the background. Keeping in mind this is a dead stock car with 125,000klm, this is what the App's performance test claimed: Before After Interesting to note that both 400m tests had the same terminal speed (158klm/h) but different ETs. And no, the speed limiter seems to be higher than that at 186kl/h. Summary of the key logged parameters for the 3rd and 4th gear runs were: Those little turbos were certainly whizzing at 200,000rpm+.  Also I'm really not that excited about oil pressure 55psi at redline so I think I'll go thicker than 5w30 (nissan recommend 0w20....) and see if that improves it. Other than that (and the big boost spike....) everything looks good as a start to me.
    • Just one more post to show the final result and the original "janky" solution for a laugh. Everything feels really tight and no wobbling at all, very pleased 🙂
    • After drying a few days, time to put her back together 
×
×
  • Create New...