Jump to content
SAU Community

Recommended Posts

R32 .....Front subframe/ Engine cross member,from GTR will fit gts4 too, has mounts for castor rods etc.

$150

R32 .....headlight - (projector) left/passenger side - dip/hi beam bulbs missing - $150

R32 .....GTR - Front swaybar, 21 mm hollow - $80.

located in Brisbane.

Stephen

Found the following thread: http://www.skylinesaustralia.com/forums/sh...ght=castor+rods

see post 4: from SK;

the GTST has more caster than the GTR as it is limited due to the four wheel drive requirements. The upper suspension mounting points are in exactly the same positions on the chassis. So the only way Nissan could get the caster difference needed was to have different lower control arm inner mounting points between 2wd and 4wd. Hence the sub frame is different. The shocks, springs and stabiliser bars are the same physicaly, obviously the rates are different though.

Sorry, from above I would say that it wont be ok. I know for sure that the castor rods are different, meaning that you more than likely need to do a lot of part swapping if it is possible at all.

Stephen

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...