Jump to content
SAU Community

Recommended Posts

  • Replies 376
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

are these deep cycle?

anybody with big sound system given these a test?

where on the specs does it says 600cca?

do they have warranty?

1) They are not deep cycle , they are gelcell .

2)Dont know

3)they dont say , they only say the 40a/h

4)I cant offer you a warranty as it is a wholesale price

Also does someone have a price and local source for the screw terminals???

T.

i bought some oddesey terminals that come with allen key bolts than screw into these batteries,

i got mine from battery world near tempe on the princess hwy in sydney, there is many battery worlds around the state im pretty sure they all sell them.

for the pair it cost $18, they are large tapered terminals u can see pics that someone else has posted of them (transplanted from their old odessey to their new battery)

i bought some oddesey terminals that come with allen key bolts than screw into these batteries,

i got mine from battery world near tempe on the princess hwy in sydney, there is many battery worlds around the state im pretty sure they all sell them.

for the pair it cost $18, they are large tapered terminals u can see pics that someone else has posted of them (transplanted from their old odessey to their new battery)

Im keen for a set of these terminals but the closest battery world is probably 3 hours away.

Could anyone pick me up a set and send them to me? I'll transfer the $$$ first.

:P

Received battery yesterday, thanks

Will try to put them on tomorrow

Do you need to charge this before first use?

or just plug and play?

Good to hear , it got there quick , just put it in , it should be fully charged .

I cant find a set of terminals either, checked battery world, coventry, repco, supercheap... none of them have it for sale seperately. Right now its installed in a rather dody maner (Nut, Bolt, Washers) if you get what I mean. Any ideas where I could get some?

I cant find a set of terminals either, checked battery world, coventry, repco, supercheap... none of them have it for sale seperately. Right now its installed in a rather dody maner (Nut, Bolt, Washers) if you get what I mean. Any ideas where I could get some?

they should have them, ask for optima battery terminals. I know battery world at tempe has them.

Yea they have the terminals for odyssey and optima, but they dont want to sell seperately... it comes as a package with the battery.

on another note, these diamec are awesome, cold starts even with a wolf is so easy now ahha

Yea they have the terminals for odyssey and optima, but they dont want to sell seperately... it comes as a package with the battery.

on another note, these diamec are awesome, cold starts even with a wolf is so easy now ahha

Sure? Ask them again.. Is this battery world at tempe? Coz I know they do it. Unless they have changed it since so many people go there to get them.

Yea they have the terminals for odyssey and optima, but they dont want to sell seperately... it comes as a package with the battery.

on another note, these diamec are awesome, cold starts even with a wolf is so easy now ahha

If you cant buy what you want , there is a couple alternatives .

Go to jaycar and buy eyelet terminals or cut your old battery's lead posts drill a 6-7 mm hole in the centre and screw them on the new battery and you have new posts . If you have the stock 33 gts the negative terminal has an eyelet so you can just screw that one on and you only have to worry about the + .

I hope that helps you in someway .

they should have them, ask for optima battery terminals. I know battery world at tempe has them.

i got mine from battery world tempe as well. they had them in a cardboard box, no packaging, so maybe they only had a few sets spare. just call them.

oh and dont buy stuff like clamps from them they are a rip off, i got my wider clamp for $4 from repco.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Ok gotcha, so one post to fpr  another to bov  and I have the mishimoto boost controller and a link g4+ so I’d just have the tuner set it up properly. For the last two from plenum post throttle to  ecu/ boost controller, I know that I have a hose coming from the ecu that I was confused about so I assume that’s what connect to the boost controller from the ecu? And then the last is just from plenum to boost controller then to wastegate?
    • From there, it was just a quick electrical check, prime the oil and start her up Which, is not what happened. 1. Bloody seppo Aeropro battery holder. Not only was it too tall for the battery (which I'll forgive them for, I have another battery the same nominal size that is taller than Neil's one, but the bracket is a fixed height so the battery was spaced up) But the thing that really shits me is the hardware to hold it on requires a 7/32 Hex key. WTF. No-one will ever be able to remove or install the damn thing without a hex key they don't own 2. Kill switch no longer worked once the console was installed. Neil mentioned above he had to adjust the length but it no longer cleared the console once installed. Sorted. 3. Suspiciously, the brake light holders were hanging in the boot with no globes. Sure enough the stopper on the brake pedal was missing so they are always on unless the kill switch is activated. Will pick one up tomorrow (turns out 32 and 33 don't use the same stopper) 4. All that sorted, I turned on the kill switch, turned the key to ACC. Nothing. Turned it to IGN. Nothing. Checked some fuses and found the main IGN in the boot was missing which improved things once it was replaced. Now ECU and dash lights turn on with IGN but still no fuel pump. 5. Turned it to Start....ECU on, no fuel pump, no starter. Plus the voltage dropped straight to 9v.  I suspect the starter is f**ked but am going to have to work through it all and see what is happening, really looks like more than one issue. Does anyone have the R33 fuse box key with the circuit it sources from (eg BAT, ACC, IGN, SRT etc) and supplies? I can find a translated list showing Amps and circuit without supply circuit, and I can find supply circuit without Amps and target circuit.
    • 3rd time lucky, the AAC is now all plumbed up after getting some final fittings All set up under the plenum of maximum access
    • OK, so the weight has been bugging because it was really low. I did it again today and got a more believable answer at 1246 without driver And with a 93kg driver I'm pretty sure the car was still slightly on the quickjack last time meaning the full weight was not on the scales  
×
×
  • Create New...