RB25 AFMs on R32 GTR

[itbmils]

All

I've herd that I can run RB20/RB25 AFMs on my R32 gtr - cheaper than Z32/Q45 - easy to get 2nd hand too I expect

what's the story

what diameter are they (80mm?)

is this a good idea

how difficult is the swap

I have a Blitz Access ECU – will that cope with the change

[itbmils]

Anyone ?

[pnblight]

1. plug no worries the same as std

2. size same as z32 80mm so inlet piping mods needed (same as z32 would require) not a big deal

3.if you have pfc you will need to change afm selection on hand controller and i would surgest a power run on dyno to check all is well(i dont know if std ecuon r32 can be retune to handle else)

4.rb20/25 should be good to around 540rwhp

5. can normally get for about $150ea verses $350ea for z32(can buy new from repco std bosch part)

[pnblight]

hope that helps

[itbmils]

good work

sure does help - looks like a good (cheap) option for me

BUT - Nissan are quoting ~$700ea for an RB25 AFM - does that sound right ?

[pnblight]

good work  

sure does help - looks like a good (cheap) option for me

BUT - Nissan are quoting ~$700ea for an RB25 AFM - does that sound right ?

no you can get second hand for $150ea(rb20/25) and i know you can buy new z32 from repco about $360ea or sumthing as they a std bosch part

[Yorik]

Sounds Pricey considering that you can get Z32's cheaper than that.. I think C-Red can get Z32's for around 550-600 new including plug..