Jump to content
SAU Community

Recommended Posts

1985 renault fuego gtx.

that car went hard and for some reason everyone thought it was a turbo (which we didn't get delivered here).

put mags on it because it would cost the same as putting michelin tyres on it that were specifically made for the wheels of the fuego (go figure those crazy frenchies!)

  • Replies 70
  • Created
  • Last Reply

Top Posters In This Topic

First car was a Diahatsu charade 1992 Gtti model with 3cylinder injected twin cam turbo motor

Had the usual 2.5 turbo back exhaust, air filter, bov.

It was a gun that little thing, i loved it and i miss it...

Had to sell it because bottem end crank bearings i think it was, were on there way out...i could get replacement bearing but had to wait 3 months...couldnt be stuffed...

Feb '00 - 1990 Cressida GLX Auto

First car, absolutely loved it. Good go with the 7MGE 3L, but wanted to add the T and a 5 speed from a Supra. Written off - my fault. :(

Feb 02 - 1996 Skyline GTS

Always loved the Skyline. Non-turbo due to cost, and P-Plate laws in Vic at the time. Written off - P-plater ran a red light and took me with him. :)

Feb 04 - 1997 Fairmont

I'm a Ford man! What can I say? I had a set budget and this is what I could get. No accidents in this one! :)

Feb 05 - Time for something NEW

1978 Mercedes Benz 280E, with faded paint (except on the panels that had been resprayed to fix accident damage) and rust holes so big if you lifted up the floor mats you could watch the road go by... I tinted the windows and put in stereo etc... I drove it for like a year with a blown head gasket, damn thing just wouldn't die! was an a bit of a pig to drive fast... understeeeeeer... but fun in the wet though!

My first true car (which I owned and drove all by myself and didn't have to share with any other family member was in 1996 a......

1984 Subaru Sherpa

car.jpg

2 Cylinder Carby 665 cc (0.7L) engine

Power 27 KW  

Torque 54 Nm  

http://athene.riv.csu.edu.au/~ajohns31/sherpawebpage

CAN YOU FEEL THE POWA! lol

this was replaced by a 178rwkw CA18DET strawberry face 180sx in 2001

A little car for a little man

Excellent thread! Paid $1500 for a rusty LX hatch Torry b4 I could drive. Spent three years beating the crap out of the gutless 202 & doing minor mods: 14" wheels, extractors, twin SUs. Learnt a lot, saved again & spent $4k building a 186 (192 after 60 thou overbore :)). Built it myself, had triple SUs (yes, a bugger to tune but so worth it!), 3:2 rollas & solids in a custom ported 173 head with o/s valves. 11:1 compression (had to put hard valve seat inserts in to run 98 RON unleaded, or AVGAS when I could get it) with a 300degree 296 thou lift cam. Was a great pleasure to chew up & spit out VN SSs, SSS pulsars etc in a car that looked like shit on the outside. Still have it, but off the road thanks to a d*ickhead in a mobile crane have a brain failure on a wet morning & getting sideways when I was off his back corner. Time & money permitting, might rebuild the car or get hold of a little rail/altered dragster to slot the engine into. Hello methanol & triple sized jets for the SUs if I go that road. :)

1st: '92 Holden Vp Commodore - stock as they came

2nd: '84 Mazda 929 2 dr coupe (RWD - rarity in aus) had seatcovers neons in footwells and above head on roof :) and a stezza that was about it, oh and a 'sports muffler' that still sounds like ass :) (My bro has it now and has bombed it out since... and still doing it up)

3rd: '93 Nissan Skyline R33 GTS, cat back exhaust, kyb adjustable shocks, lowered springs, 17inch rims, half a stezza setup, neons in footwells!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Good points thanks. Unfortunately I can't seem to rename this or delete the topic. Seems like I'll ask the moderators to change it or delete it.
    • You might want to update the thread title.  V37 ≠ V36.  And it probably isn't a G37 unless it is 2012+ Ininiti or LHD.
    • Just a basic run down of the relevant bolt-ons. All e85 First graph 406.9whp is HKS GT-RS, HPI manifold, 3" bell mouth dump / 3" straight through fake cat / 3" all the way to the rear and no resonators, nismo 740cc, walbro 460, oem RB26 itb's, power fc, eboost2, Greddy Spec M fmic, poncams, Turbosmart actuator, splitfires, ARD 150amp alternator. Blue line is same as above but Blitz Dual SBC (before i upgraded to eboost2) and 100cell "high flow" cat. Red line is after installing eboost2 and the fake 3" cat (it's just a 3" pipe with a cat shell welded onto it). Huge gains in response, as can be seen. Black dots are a mates sr20 with almost identical setup but uses a garrett 2871 instead oh HKS. Next grapghn 466.6whp is same as above, but HKS 2835 Pro S with the larger .87ar turbine housing, the special HKS Pro S dump pipe into a HPI split dual 2.5" front pipe and the rest stayed as is. Red line is after I welded the actuator brackets. (It was originally bolted together and was moving a couple millimetres under load). Green line is obviously before I welded the bracket, no other changes. 100whp gain at 3750rpm, massive gain for such a simple fix. Third graph is my current setup, huge changes. 469.7whp R31house twin scroll manifold, twin TiAl 38mm gates, Forced Performance (USA) HTA3076 with 1.01ar twin scroll rear housing, Link Fury+ and loom by 12volt, PRP trigger kit and r35 coil kit with r35 splitfire coils, HKS step 1 vct staggered cams, new oem lifters and performance springs, 49mm itb's w/port matched Nismo plenum, twin walbro 460 surge tank setup + 1650cc injectors, HKS Type R S13 600x300x103mm fmic, individual egt's, 4" turbo back with no resonators or cat and AES true straight through muffler + 4" butterfly off the dump pipe lower 90° bend. It's a preliminary tune with no boost control with using 20psi gate springs and 4" butterfly closed. Once body loom and PDM is compete, will go for 30psi tune.
    • Power light apparently functions as a transmission error light, you can try the power sequence to read any codes from the transmission control unit.  
×
×
  • Create New...