Jump to content
SAU Community

R33 Shell - MUST SELL THIS WEEK - All offers considered....

MR R32
 Share

Recommended Posts

MR R32 Experienced

MR R32

Posted
Posted

R33 Shell

I am selling my R33 GTST Series 1. Its a 1993 model which has been stripped for the motor and gearbox..

It is just a shell - no motor, box, clutch, shocks, wheels, brakes, or interior. Most panels are gone, except for the bootlid and the driver side. All glass is still in the car and is not damaged. All air conditioning parts remain apart from the center vents.

I am looking to get rif of this ASAP, so all serious offers will be considered. This car can be registered after repair as it is a repairable write off.

**CAR HAS A COMPLIANCE PLATE AND IS LISTED BY REVS AS A REPAIRABLE WRITE-OFF**

Photos will be posted very soon.

Price: $999.99 - all offeres considered. Pickup available from Silverwater NSW.

**MUST BE SOLD THIS WEEK - ALL OFFERS CONSIDERED!**

01.jpg

02.jpg

Greg Veteran

Greg

Posted
Posted

you say no shocks...what about other suspension components? eg control arms, swaybars etc

what colour is it?

is the shell damaged? what condition are the quarter panels in?

are both doors included? (this is implied by 'all glass')

any pics?

i am in vic but interested in this as a base for project car. can arrange tow truck. thanks.

MR R32 Experienced

MR R32

Posted
  • Author
Posted

I currently have an offer of $600 on the car.

all glass is still good, but the car sustained damage to the whole left hand side, front guard, front bumper, quarter panel, door, and rear bumper, and left rear light. Chasis rails are not bent, and this car will be registerable once repaired...

[/size]

All suspension will remain in the car excluding the shocks. Wheels will also be removed.

This is a great buy for anybody wanting to start a project 33. There is way more than $600 worth of parts sitting in the car (all aircon, instrument cluster, drivers side panels, glass, compliance plate, shell, suspension parts) is worth double the current offer of $600.

PM me for REVS check information details.

Pickup available from Silverwater this Saturday!

Greg Veteran

Greg

Posted
Posted

thanks for the reply. if you could be bothred taking a few pics showing the damage it would help me to decide if i want it, its hard to buy a wreck without seeing the extent of the damage first hand.

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      Impossible to remove the housing while turbo is installed on the manifold on the engine. So I have to do it anyways. I plugged it so there will not be any debris in there. Will vacuum aswell 
    • JC71
      gtr hood match gt/gtt front fenders?

      By JC71 · Posted

      would a r34 gtr hood line up with gt/gtt stock fenders? after latch, front bumper and hinges are swapped for gtr ones? or would the fenders be too low or high in relation to the hood surface? ( I believe seeing somewhere that gtr front fenders use some type of riser for the sides, but do not know how that relates to stock gt/gtt fenders.)    
    • TurboTapin
      boost source Size Garrett gt28 gen2

      By TurboTapin · Posted

      You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • QB6SAGR
      Battle of the broken skylines

      By QB6SAGR · Posted

      Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
×
×
  • Create New...