Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

Hi Chris

Interested in GTR cat, if still available. Your PM box is full. Could you please beam over a PM when you can or email [email protected]

Thanks

Mark

  • 2 weeks later...

Thread updated.

Front Pipe and Dump still up for sale! Reduced the price of the dump down to $150.

Cheers

Chris.

Hi Chris,

Interested in the dump pipe I assume this will fit a 32 GTS-t? Will it fit an aftermarket turbo as well, its a T3/T04b Garrett turbo??

Cheers

JL

ey mate,

will the

"3. HKS Front Pipe. PRICE DROP $150

4. Aftermarket Dump Pipe. FURTHER PRICE DROP $150"

fit a four door r32 gtst???

if so really interested,

let us know asap.

matt.

Shweeet, i got a 32 gtst AUTO, im keen on that package,but can maybe afford 1 at a time, let me know.....cheers

JL - Hey mate, will only fit a R32 (two door) Auto. If that is you then thats fine!

Nissanboy - Nup I am sure the 4 door has its own front pipe! what is the chassis model of the four door? HNR32 ? The dump however should be fine for an R32.

RSTME - The front pipe is a Perfect fit for a R32 Manual.

GOR33 is pretty keen on both the dump and the FP! I'll let you know if the sale falls through...

Cheers.

Following parts for sale from my R33 GTS-T:

1. Apexi AX53B70-P25 Turbo. <== SOLD (Thanks Halz)  

2. APEXI R-95 Titanium Cat Back exhaust with Silencer for GTST/GTR. <== SOLD (Thanks SydneyKid)

3. HKS Front Pipe. PRICE DROP $150

4. Aftermarket Dump Pipe. FURTHER PRICE DROP $150

5. Recaro Race seat with Bride Rails. <== SOLD (Thanks Cheek)

6. Genuine Nissan Skyline Seat Covers. <== SOLD (Thanks Pushhead)  

7. Genuine GTR CAT. <== SOLD (Thanks Cowie165)    

1. Apexi AX53B70-P25 Turbo for Nissan Skyline R33GTST + R32GTST.  

Awesome turbo in excellent condition. Purchased 12 months ago second hand and was inspected and installed by Eric Engineering and Craig (who is now at Genesis) at Hyper Tech Auto sports. Made 230rwkw in non shootout mode (refer to dyno graph) at 1.3bar with stock standard engine internals including injectors. I have included a pic of the dyno graph. The characteristics of the turbo is that it delivers very "punchy" style power, excellent for track work or anyone wanting make there car very fast on the street with fantastic response and better than stock turbo driveability.    

The turbo has recently been removed from my car by Craig and has no shaft play. The turbo includes the actuator; braded water lines, oil line connectors, plus near new gaskets. The pink marking on one of the compressor blades indicates that’s its still in near new condition.  

<== SOLD ==>

 

2. Apexi R-95 Titanium Exhaust. Same part number for R33 GTST and R33 GTR so will fit both models.    

Purchased brand new two years ago and has travelled no more than 10,000k's.   Purchased to get the ultimate flow and sound out of my R33. The muffler and piping is 100% Titanium with a diameter of 95mm straight through all to the catalyser adaptor which is made out of mild steel in order to make the system street legal! Otherwise the piping can be run straight into the front pipe for track days. The sound of the exhaust can only be experienced as it is truly awesome.  The whole exhaust system is extremely light weight and can easily be picked up via one hand. Probably the best exhaust system available for GTST or GTR.  I have included a dyno comparison "before" and "after" done in non shootout mode at Hyper Tech Auto Sports where the exhaust was installed. The car was stock standard apart from a PFC and Boost control (running at 1.0 BAR) kit plus a Nismo Cat back exhaust, GTR cat, HKS front pipe, and dump plus air filter. I had these modifications in place then installed the R-95 with no other changes to boost control.  

In excellent condition, hardly has a scratch on it! Still have the box to pack it away in plus Apexi certificates and installation manuals in Japanese of course.

Price $1,500. <==SOLD==>

3. HKS Front Pipe for R33 GTST.

Mild steel front pipe. Genuine HKS item.  75mm diameter.  

Price $ 200. PRICE DROP $150

4. Aftermarket Dump pipe for R33 GTST.

Unknown of its origins but most likely from Japan as it is very high quality and has robotic welds. Please refer to pics.  

Price $ 300. FURTHER PRICE DROP $150

5. Recaro race seat and included rails made by Bride for R33.  

Drivers side and fully adjustable.  

Purchased off the forums a few months ago second hand and I have never installed into my car. In good condition apart from the right leg support being worn by previous owner getting in and out of car, plus has a small cigarette burn which has been filled up.  

Price $ 400. <== SOLD ==>

6. Last but no least "Genuine" Nissan Skyline Seat covers.    

These seat covers came with my car when I purchased it 4 years ago and have been sitting in the bottom of my cupboard ever since. Genuine and say "skyline" in the middle of them. In good condition front and rears and have been washed and cleaned by my mum!  

Very rare.

Price $100. <== SOLD ==>

7. Genuine GTR CAT

Excellent build and flow quality Cat.  Always good things being said about them in in Zoom and HPI magazines.  Purchased for $300 s/h to replace my compliance cat when i had the Apexi R95 installed.  Pics will be taken if requested.    

Price $100. <== SOLD ==>

All enquiries welcome via PM and mobile: 0410 327 852

Thank you.  

Chris.

Check your pm

  • 2 weeks later...

Thread Updated. PFC Boost control Kit up for sale! Still on my car, will me removed next week and packed up for sale...

Any questions, please PM me!

Chris.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome Alice......hope you have a bit more luck from here on! What was done in the build?  
    • Hello! I'm new here, I have an R33 GTST that is currently being finished up! Last year was pretty rough, blew two stock turbos so I decided to build the car. Has been down since November, but I get it back next weekend!
    • Hello, I believe my car was imported to America in the 2000s by Kaizo Industries. Would anyone be able to help me find more info on them? I've only found all the basic stuff like that paul walker bnr34, them being shutdown by feds, just stuff like that. Any help would be much appreciated, thanks!
    • I am using Motec M150.  I am not working on the car myself actually.  My workshop is giving all these info, they are quite reputable in the industry and are very familiar with Motec and RBs and have done a few big setups with VCam and single turbo on RBs.  In fact, they built and tuned my engine from day one.  But they are stumped with my engine at the moment and cannot work out how come the compression is so low with the VCam. They told me that they have now swapped in some Kelford cams (without the VCam) and can achieve around 130psi compression and the low end torque is better, but now the engine is doughy as.  It boosts and peaks at more than 1000rpm slower, with twin HKS GTIII RS, it doesn't get full boost until over 5000rpm. I have always thought the VCam was a bit disappointing at the low rpm. To a point I had to ride the clutch a fair bit to get up a small hill from stand still.  That was when I had a clutch.  Now changing to a 8HP, I don't have that luxury and this problem has become a major issue. I am beginning to think the VCam never work since the day it was installed.  Maybe it was just sitting at the most advanced point, that is why it went good at top end but very ordinary at the bottom.  Therefore, with the help of the Holinger 6 speed and paddle shift, as long as it was moving, it drove pretty good.
    • yeah, there's a country that recently started importing Skylines, I blame them.
×
×
  • Create New...