Jump to content
SAU Community

Coming to Japan need to know a few things...

Ed G

By Ed G,
in Japan

 Share

Recommended Posts

Ed G Grand Master

Ed G

Posted
Posted

Hi,

Coming to Japan on 1st Feb, Mainly to go snowboarding in Niseko... so one quick easy q... will my Samsung E700 work over there (obv has int roaming on)?

Other q is, when snowboarding me and my bro carry UHF's, in Aus there is 40 licence free chans ranging from 476.400MHz-477.400MHz. Will transmitting on these chans in Japan get us into any trouble? IE: are any of these frequencies reserved for emergancy services or signalling? (Have no idea where to find this info!)

Thanks,

Ed. ;)

akeenan Grand Master

akeenan

Posted
Posted
Phones in japan use a different network than our cheap shitty one.

network wise australia has a fairly good coverage.... often here in japan i cant get reception due to many many black spots. It could just be my poor FOMA (video phone) .. (which will be upgrade in april)

the point im trying to get at is at the moment with my phone i was happier with australias network coverage

omg Explorer

omg

Posted
Posted

We've used australian cb's in japan a bit - climbing fuji, at the jgtc etc - however I've no idea whether we were allowed to or not. There wasn't any traffic on the frequencies however that could simply mean there were a whole lot of confused ambo drivers. I guess the thing to keep in mind is that if you are going to get in trouble for using them it's not going to be hard for them to figure out who it is.

re the phones, in japan it's w-cdma. The first phone I've seen available in aus (there are a few in japan) which can handle w-cdma and gsm is the nokia 6630 which is either just released or about to be released. Getting it to work in japan is the next challenge, vodaphone would probably be the best people to speak to.

pistolero Apprentice

pistolero

Posted
Posted

On a similar topic:

A couple of mates are going snowboarding next week in Sapporo and will have a few days in town during some sort of winter festival. They want to know if there are any motorsport events or tuning houses' that would be worth a visit while they are there.

Any info much appreciated

Thank you

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      A little PU bush story

      By GTSBoy · Posted

      They do. The pale yellow translucent ones from Japan were .... I dunno. Useless? Whiteline and SuperPro are probably fairly similar. There's bound to be a range of different hardnesses amongst the dozens of options on the market. The simple fact is that the pineapples don't get up inside the bush at all. They just sort of exist in the space between the washer/bracket and the subframe's bush outer tube, and...exert a bit of force between them? Or something like that. I'm sure that with enough provocation, they will simply allow one to more wrt the other.
    • Kinkstaah
      A little PU bush story

      By Kinkstaah · Posted

      I'm not sure they came in different hardnesses? Going from memory only - I had set them up in the balanced setup. I also have poly bushes, so I have both poly bushes and pineapples. This is what my memory tells me at least. I'll have to take a look under there to be sure. The tramp was so bad that I managed to eject/kill a diff bushing, so those I know are stock. The tramp is bad enough that you are 200% sure you are doing severe damage to the car. It's not just chirping or vibration, it feels like you're hitting a speed hump/kerb 10 times a second. The issue has persisted between subframes! (I went from Hicas to non hicas subframe and replaced every bush a few years ago now) so I'm entirely lost. Every arm is factory.
    • Butters
      Need AC Compressor for R32

      By Butters · Posted

      Can recommend the Frenchys kit, been using it 2 years now with no issue, very happy with it.  Only thing for me was upgrading the thermo fan but I am super fussy on cooling.   Also interested in electric AC, partly for boot mount to have a clean bay and partly would love the idea of cooling off the car before i get in. The battery setup to do that might be tricky / expensive though.  Found this an interesting watch.    
    • The Bogan
      A little PU bush story

      By The Bogan · Posted

      I put Whiteline pineapples in my old 33, they came in a 6 pack of them, got rid of the axle tramp altogether, cheap, quick and easy install,  they were pretty solid units though...???high durometer???? and NVH was increased a fair bit How hard are the ones you installed?
    • GTSBoy
      A little PU bush story

      By GTSBoy · Posted

      I'd suggest the answer to the first question is at least a qualified "yes". I'll come back to that. Pineapples just don't do a lot to solidify the mounting of the subframe. They do a little bit, and that little bit was clearly helpful to me in the past, but the main thing they are intended to be used for is to tip the orientation of the subframe to try to either dial in more or less anti-squat. You can install them one way to try to increase launch traction, or the other way to try to increase lateral grip (at the notional expense of longitudinal traction). Or, as I did, you install them neutral, which only really offers a little bit of "snugging" up of the subframe. When I did pineapples, that was the only option. No-one had a machined alloy collar like the GKTech ones. There were some other options, but nothing like the slip in collars. And it is clear from looking at them that they occupy almost all the free space inside the rubber bush, so they will do a lot to stop them moving internally. So I thought, "that's the game for me!". Obviously the next/adjacent step is poly bushes, but what's the point in doing that with all the work and hassle required to change them over, when jamming (and I mean literally jamming) some alloy into the rubber bushes probably gives an equivalent, or possibly even superior result? So, to go back to your 1st question, I would suggest, for the investment of <<$100 and a morning spent lying under the car swearing and getting some sore fingers, it is certainly something you should try. Who knows? Maybe your situation is so severe that it doesn't solve it. But it might help a lot. If your problem is as severe as you say it is, the next thing to look at is what the rest of the bushes in the rear end are made from. Things like the Hardrace arms with hardened rubber bushes might be a good thing (for the purposes of having adjustability AND stiffer bushes). Otherwise, just poly bushes throughout could be a help. Or following in my fever dream footsteps and putting a lot of sphericals into the rear? Eliminate undersired movement to avoid the build up of resonances that cause the tramp. Also, if you have adjustable uppers in the rear, and you haven't put effort into adjusting the traction arms to minimise bump steer, there might be some advantage in that. If you don't want to go to the effort of doing it yourself (like I am pretty much forced to in Adelaide, owing to a lack of race alignment specialists) then surely there's a place in Melbs that is able to do it. It will cost $$, But that's life.
×
×
  • Create New...