Jump to content
SAU Community

R32 GTR front speaker size?

[[d a n n y]]

By [[d a n n y]],
in Car Audio & Electrical

 Share

Recommended Posts

richms Newbie

richms

Posted
Posted

Just to add to this, I got some cheap 4x6's for the front of mine, tried both some absolute crap "lighting bolt" ones and some slightly cheaper, slightly less awefull looking boshmann ones,

Both dont drop right into the plastic bucket thing the factory one was in, they have a gap around the edge so would sound totally useless. I will have to make/modify something to get a speaker in there so havent bothered since I was planning on flicking the car on sometime soon, but now I will be keeping it a bit longer I may get around to putting one of the 2 sets I got into it (the otherone will be used in my mame cabinet but thats another story) - anyway, just because its the right size on paper, dont expect it to be a drop in replacement

B0oStEr Mentor

B0oStEr

Posted
Posted

dj I guess the dyns you are fitting are the mw160gt.

I'd like to see how they fit as I tried to fit some to my 32 and concluded there wasn't going to be enough clearance behind the factory doortrim at the top of the grille once you allow 8mm for cone excursion.

I'm sure a man of your experience will have noticed the quadrant gear that invades the space behind the speaker as the window winds up.

djhatton Proficient

djhatton

Posted
Posted

no they weren't gt's and they DO fit. just takes a little bit of fiddling thats all... you've gotta sit them on an angle. i'll send you pics when my mounts are finshed dude. chances are i might be fabricating sealed enclosures for the 9" dyn's i've got my eyes on anyway, but i'll let you know either way.

d

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      Baron's R34 GT-R build thread - car in Japan for 5 years -_-

      By joshuaho96 · Posted

      I know mentally you're set on the ATS clutch but honestly I'm a big fan of the Nismo Super Coppermix Twin. It's much cheaper and in some ways I think it's a better design for a street/circuit car.
    • soviet_merlin
      Baron's R34 GT-R build thread - car in Japan for 5 years -_-

      By soviet_merlin · Posted

      Just checked in first post and you should be able to bring it home November this year, right? I'm amazed you made it through four years of this. As hard as it feels now the rest will go by in a breeze in hindsight, I'm sure.
    • BaronOBeefdip
      Baron's R34 GT-R build thread - car in Japan for 5 years -_-

      By BaronOBeefdip · Posted

      Realized I haven't been back here in a while. Still here, still alive, still waiting for the car.  I went back again the only time last year from Oct-Nov for R's Meeting and drove it around some more, including a few laps on Fuji Speedway(in the wet, sadly). The car still feels good, but have a couple small things to address. I've been getting more parts but have slowed down still, and most of the bigger purchases are now out of the way. I find myself getting impatient more and more when it comes to getting started on this project; it's quite hard for me not being able to really dive in and start making this car my own because it's halfway across the world. At times it doesn't even really feel like I own one of these. Haven't really been motivated or had the desire to document the last trip on here or social media for, well, reasons... but here's some pics...it's also still alive and well as you can see: I've narrowed down to the last large part purchases(anything over $2k) before the engine build to be: 1) Ohlins Road & Tracks 2) ATS Twin Carbon clutch 3) Endless BBK with some custom options and 4) Kansai Service carbon driveshaft I don't think the budget exists for all of these this year, but I'll try for one or two items I think. Though, every time I look at my spreadsheet I sigh, shake my head, and get depressed just that little bit more.  'til later.
    • Shoota_77
      R32 GTS-t RB30 sedan

      By Shoota_77 · Posted

      It's a stunning location!  I've been to NZ twice but haven't made it to the North Island yet.  Definitely on the cards but the South Island is hard to tear yourself away from too... Looking forward to see what you can wring out of it once you can get it to hold together!  Be awesome to get a low 11 or even sneaking into the high 10's pass out of it.  That's a bloody quick car that most people will never experience in their life.  Enjoy!
    • joshuaho96
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By joshuaho96 · Posted

      Nominally yes but I’m not really at that stage yet. Outsourcing to Japan is also a relatively good deal at the moment because their currency has devalued much more against the USD.  You would assume this but a lot has changed from the pandemic. Mechanics are in short supply and demand for fixing old cars has gone up from the cost of new cars. 250-300 USD/hr is not an unusual shop labor rate in California and you’re paying that regardless of whether the guy is competent or not. Coworkers have been quoted 3000 USD for a water pump and thermostat at a dealer on an N54. Oil changes went from ~75 USD to 150 on fairly normal cars like Civics. The cost of the oil and filter hasn’t even kept up with inflation.
×
×
  • Create New...