gtr box rwd?

[SoOkY]

can i use the gtr gearbox in rwd, would there be any problem? Just saves me geting a rb25 gearbox

[TTT]

you would need to cut off the transfer case and weld it up.

well basically that is it..

internally I've been told many times that the rb25 and gtr gearboxes are the same.

what car is it in?

[GTR-Ben]

I have just cut the side off an RB26 box and welded it up.. the RB26 box is still longer and may require a little tap under the tunnel to fit.

Quite hard to weld it up.. would require good fab skills and time to make it work well.. I basically closed the whole transfer case part up.. also need to check for leaks etc before using it.

I believe you can also bolt on an Z32 nose cone.. but you would need to sort the shifting mechanism... as the Z32 uses arms.

[Cubes]

I've seen gtr box's go for around $700

[GTR-Ben]

$500 had a slight "hole" in the transfer case already.

And the cool thing is.. if I wanted to I could bolt my 2WD welded transfer case onto one of the OS or Trust boxes and bolt it in.

[SoOkY]

rb26 going in a 200sx

[KamikazeR33]

the gtr and gtst box is the same inside except for 1 part.. forget what it is... makes it weaker than the gtst one

[NXTIME]

rb26 going in a 200sx

Then just use an RB25 box. It's been done quite a few times already.

[Cubes]

The benifit of the GTR box it is at least have the price of a rb25 box.