Jump to content
SAU Community

Automatic Transmission Shift Kit. - Updated Oct 2006


Recommended Posts

This topic and prices have been updated on October 9th 2006.

MV Automatics in Adelaide make shift kits for automatic skylines.

The kit consists of a Valve Body for the RE4R01A auto trans, which includes R32's and R33's and some others (Stageas I believe).

And now R34's

Final price is now $330 +$55 deposit + postage of between 20 and 30 dollars) and he will send you out a complete Valve Body Assembly. The $50 deposit on your old valve body assembly will be sent to you when you post your old one back and it checks out OK.

If you just want to purchase one and not worry about posting your old one back then the price is $385.

Higher speed torque converters of between 2800 and 3000rpm are $410 changeover

The discussions about this have taken place on the following thread

http://www.skylinesaustralia.com/forums/sh...age=1&pp=40

Some members have asked about an option to include a new gasket and filter, which Mike said he would highly recommend we all do anyway, will cost about $33 for a "Service Kit"

Mike at MV AUTOMATICS (1 Stirling Rd Blackwood SA 5051 (08) 8370 0430 )

can run the group buy for us but have asked that we do it in groups of 4 at a time. When the first 4 send back their valve bodies these will be modified and overhauled ready for the second group of 4.

Could those who want to take part in this Group buy please PM me to express your interest. Final price is still a little unsure, but the maximum price would be $335 +$50 deposit (refunded when you return your serviceable valve-body) + $33 for a service kit if required.

Names of those confirmed will be posted below.

PS I have already installed this kit in my 33, and highly recommend it.

Conformations:

Abo Bob

Fastrotor

flex - vic

4door Sleeper

Iopia

jakester

krone - qld

linkems

lukits01 - wa

nedb

nedb – nsw

rd-runr - act

skidline

skyguy3804 -vic

tikki169

Edited by 4door_Sleeper

Ok so how does this work?

We pay, then MV sends us the new valve body, to which we install, then send him the old valve body and recieve our $50 back?

This correct?

Does anyone know the weight of the standard valve body to work out shipping costs?

Count me in, aswell as the service kit

Ok so how does this work?

We pay, then MV sends us the new valve body, to which we install, then send him the old valve body and recieve our $50 back?

This correct?

Does anyone know the weight of the standard valve body to work out shipping costs?

Count me in, aswell as the service kit

As soon as we have sufficient numbers we will have a chat with MV and work out how payment should be handelled (and a final price).

One option may be that you transfer money to him, another might be that you send it to lukits01 or myself and we will give it to MV as a transfer oc cash depending upon what deal works best.

If we can get 4 mambers from one state we should be able to reduce the cost of shipping if everyone can collect it from a central location, but this will depend upon numbers and locations.

Hope this helps.

Ok so how does this work?

We pay, then MV sends us the new valve body, to which we install, then send him the old valve body and recieve our $50 back?

As I have already done extensive work to my Auto - Kevlar clutches, 2800RPM Stall etc I was also interested in the MV upgrades to finalise the job, but I seem to remember in the ZOOM article MV said they put welsh plugs into the actual transmission case assy for some reason as well as do the Valvebody mods.

What happens about this welsh plug mod in this case??

I was planning to drive to Adelaide AGAIN to do this before getting the orig ECU remapped AGAIN. - my fault Nino, - MORE MODS :rant:

As I have already done extensive work to my Auto - Kevlar clutches, 2800RPM Stall etc I was also interested in the MV upgrades to finalise the job, but I seem to remember in the ZOOM article MV said they put welsh plugs into the actual transmission case assy for some reason as well as do the Valvebody mods.

What happens about this welsh plug mod in this case??

I was planning to drive to Adelaide AGAIN to do this before getting the orig ECU remapped AGAIN. Β - my fault Nino, - MORE MODS :P

I dont work for MV, nor am I an Auto expert. I think in this case the best advice I can give you is to ring Mike at MV AUTOMATICS (1 Stirling Rd Blackwood SA 5051 (08) 8370 0430 ) and ask him.

Sorry I can't give a better answer, but I'd rather put you on the right path than give poor advice.

if you did this like a year ago i would have been interested but i have already had this done to mine by MV autos, top bloke great job, haven't had a problem since except in the wet when i step into second, it just spins :) but i love it

As I have already done extensive work to my Auto - Kevlar clutches, 2800RPM Stall etc I was also interested in the MV upgrades to finalise the job, but I seem to remember in the ZOOM article MV said they put welsh plugs into the actual transmission case assy for some reason as well as do the Valvebody mods.

What happens about this welsh plug mod in this case??

I was planning to drive to Adelaide AGAIN to do this before getting the orig ECU remapped AGAIN. Β - my fault Nino, - MORE MODS :D

Sweet, could you post up what youve done to the auto, how it affected it, how much etc

Just for everyone to have a read and learn something :)

I took my auto into MV and had them install both the shift kit and a trans cooler.

The trans cooler is just for insurance, as they say its heat that kills an auto, and I give mine a bit of stick through the hills (closed tracks only :bs!: ) and plan to give it a few runs at the drags (at AIR, not those red yellow green ones all over the place)

The shifts are now incredibly fast when I put the foot down (especially first to second) and the tyres will chirp during gear changes. Off the line there is very little can keep up with me unless I give it too much stick and go into uncontrolled wheel spin. (theTEIN HA are a part of this problem - good for runs in the hills but not so good for stationary launches)

The auto is defiantly the go for gear changes as the throttle stays wide open and you don’t come off of boost.

The big benefit is that in bumper-to-bumper traffic (where you don’t floor it) it drives much like a std skyline (no wheel spin) just a little bit firmer shifts.

When you look at the money the manual guys spend on clutches (every 12 months or so) why would you go past the auto.

Hope this is helpful.

I took my auto into MV and had them install both the shift kit and a trans cooler.

The trans cooler is just for insurance, as they say its heat that kills an auto, and I give mine a bit of stick through the hills (closed tracks only :bs!: Β ) and plan to give it a few runs at the drags (at AIR, not those red yellow green ones all over the place)

The shifts are now incredibly fast when I put the foot down (especially first to second) and the tyres will chirp during gear changes. Off the line there is very little can keep up with me unless I give it too much stick and go into uncontrolled wheel spin. (theTEIN HA are a part of this problem - good for runs in the hills but not so good for stationary launches)

The auto is defiantly the go for gear changes as the throttle stays wide open and you don’t come off of boost.

The big benefit is that in bumper-to-bumper traffic (where you don’t floor it) it drives much like a std skyline (no wheel spin) just a little bit firmer shifts. Β 

When you look at the money the manual guys spend on clutches (every 12 months or so) why would you go past the auto.

Hope this is helpful.

Well said, and good to hear the results :D

Does Mike have the internet at work? Could you possibly entice him to maybe make a short post of his wisdom with automatics on here, there is ALOT of auto owners out there who have been waiting for this for a long time :(

And we speak nothing but praise for his company, im sure he'd love to add to the discussion/information.

Ide also like to know weather or not its possible to replace the clutch packs and any other worn components while doing the valve body change... Obviously without taking the gearbox completely out.

Cmon Auto owners, show your interest....!

Im in on the group buy

can you also find out if there is anything else he recomends doing my auto box has to come out to fix a leaky pump seal anyway so i might as well get it all done at the same time

The big benefit is that in bumper-to-bumper traffic (where you don’t floor it) it drives much like a std skyline (no wheel spin) just a little bit firmer shifts. Β 

i have a friend who had a stage 2 shift kit in his vr 5ltr and said that for every day driving it wouldnt be the best as the shifts are harder when driving slowly.

so just how much firmer are the shifts? are they so much firmer that they get annoying or do they just take a little time to get used to or is it a case of many wouldnt even notice the difference?

oh and our old valvebody's that we would send away we get back yes? and is it just as easy to put this stock valvebody back in? may seem silly but just would like to know just in case when it comes time to sell the buyer would like the auto in completely stock form even though this would be better than stock

:D

They are modifying your valvebody for the next guy so you don't get it back however you can easily buy one second hand and return it to stock.

I would have thought that with throttle control you could smooth the shifts a little also if it's rough at lower speeds but as the old fart says, it stays smooth at low speeds.

I can't wait to get this mod. I think I'm even more excited about this than about my new turbo.

Ide also like to know weather or not its possible to replace the clutch packs and any other worn components while doing the valve body change... Obviously without taking the gearbox completely out. Β 

Cmon Auto owners, show your interest....!

I would like to know this as well as my gearbox has quite a bit under its belt. What other parts would need to be changed to refresh the box?

They are modifying your valvebody for the next guy so you don't get it back however you can easily buy one second hand and return it to stock.

Β 

I would have thought that with throttle control you could smooth the shifts a little also if it's rough at lower speeds but as the old fart says, it stays smooth at low speeds.

Β 

I can't wait to get this mod. Β I think I'm even more excited about this than about my new turbo.

True that :D

I wish i lived near MV, this would of been one of the first mods i got done.

I cant wait to see how it feels, especially with a new turbo :headspin:

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Ah yes, fair enough! I was purely thinking about cleaning the spokes and front of the wheel with the mitt. For the barrel the rag on a stick makes more sense. I've tried cleaning the barrels on mine and gave up in frustration. Between brakes being in the way or spokes being in the way and limited space to constantly move the car front and back it was just too annoying. The barrel being as shiny as the rest of the wheel sounds amazing though. At this point I'm not even sure if they have the same surface finish on mine. But I feel inspired now to find out.
    • I have a wheel cleaner pokie thing which is a glorified microfibre rag on a stick, and there is not sufficient clearance between the caliper and the barrel to clean that section. I just roll the car forward 500mm and have another shot at each wheel.
    • The "rag on a stick" is a easy way to fit in between the wheel spokes into all of the barrel Albeit I do have 10 spokes on the MX5 which limits the access to actually jam my hand in to clean the barrel, but it was also makes much easier to clean the 5 spokes on the Dunnydoore with it as well, as you don't have to worry theΒ  caliper getting in the way if you have at least about 15mm space between the caliper and barrel This of course depends if you actually have the clearance between the barrel and caliper, and the amount of OCD you have to get the barrels as clean and shiny as the face of the wheel The thing is bendy as well so you can actually shape it to conform to the inner lip of the barrel Β 
    • FWIW, as well as a basic immobiliser/remote unlock (all basic units give you those 2 things), I would also install a 4g tracker in any car I cared about. Just hide it anywhere that won't be found in a rushed look and preferably get something with a built in battery backup so it stays online for a while when the battery is removed or flat While its not a car, when our car trailer was stolen in that den of crime Sydney about a decade ago, the cops were watching from the bloke's neighbour's lawn within about 2 hours until he started swapping the plates and putting up the gumtree ad.Β Β  Obviously it is still not undefeatable (eg parking it up for a few days somewhere without sky sight) but it greatly improves your chances of getting it back quickly and with less damage
    • Instead of magic keyphrases I wonder if something can be done with auto complete. Similar to how user names are handled already. When you type '@' and follow with letters, it'll search across all usernames. It might work to have the same for forum topics. Some key to trigger it and then text search across all thread names and it'll insert the name and URL when pressing enter.
Γ—
Γ—
  • Create New...