Jump to content
SAU Community

Whiteline rear swaybar install

Reedy
 Share

Recommended Posts

Sydneykid Grand Master

Sydneykid

Posted
Posted
  Reedy said:
Is this the correct way to setup a whiteline rear swaybar on an r33 gtst it the only I can see to use all the nuts.

Wrong, you need 2 nuts on the bottom of the link bush. The spare one you have is the lock nut the stops the bush winding down the link rod. This is from my post in the Stagea section on Suspension...

WhitelineRearBarLinkcopy.jpg

You can't quite see it in the picture but there are 2 nuts below the link bush.

Hope that helps:cheers:

sparkmanv11 Enthusiast

sparkmanv11

Posted
Posted

If you bought the standard 22mm bar then the bushes will fit perfectly. However if

you bought the oversize 24mm bar "non stock" then the bushes they supply present a problem as the largest bush the have and supply with the bar is 22mm.

They dont tell you this when u buy it. You have three choices, least desirable is:

1. You hand grind it out, this will never be right as you want max surface area in contact with bush to cover in grease to stop the squeaks.

2. you heat it or as Whiteline term it "blow it out" they dont reccomend it anymore as the smoke that comes of it is seriously bad shit.

3. Most desirable is you ring Peter at Fulcrum suspension in Qld 07 3892 9000

and ask him for a set of SPF1647-22K. He will then take these to the factory next door, lathe them to 24mm, freight them to u for the massive sum of $25.00 inc freight and get them to you within a couple of days and I live in Adelaide and their purple that at least matches a skyline colour.

It may sound like a bit of rooting around but its safer and provinding you put the white goo supplied in the bush bag on them NO SQUEAKS.

  • 6 months later...
Zahos Mentor

Zahos

Posted
Posted

Sorry to drag up an old thread guys, But I recently purchased the whiteline front adjustable bar for my R33 GTSt, and it only came with the D-bushes, no linkages. The shop I got it from said that I am supposed to use the standard linkages, but I was under the impression the adjustable bars also came with the linkages???

Came somebody please clarify this for me?

thanks in advance.

Z

Zahos Mentor

Zahos

Posted
Posted
  Trust33 said:
The front adj bar i got came with bushes only.Hope that helps.It's the rear bar that has the linkages.

Yeah, I ended up speaking to whiteline and you are correct.

The standard linkages on the rear bar would not work with an adjustable swaybar, which is why they supply them. The front bar can use the standard ones...

Thanks for the reply anyhow, appreciated.

Z

Trust33 Grand Master

Trust33

Posted
Posted
  Zahos said:
Yeah, I ended up speaking to whiteline and you are correct.

The standard linkages on the rear bar would not work with an adjustable swaybar, which is why they supply them. The front bar can use the standard ones...

Thanks for the reply anyhow, appreciated.

Z

:P

  • 3 weeks later...
raz0r$harP.UK Grand Master

raz0r$harP.UK

Posted
Posted

Without resorting to opening up another thread, does someone have a copy of the Whiteline instructions on how to install the front and rear (adjustable) sways on a 33 GTST? Mine didn't seem to come with any!

Thanks..

Sydneykid Grand Master

Sydneykid

Posted
Posted
  raz0r$harP said:
Without resorting to opening up another thread, does someone have a copy of the Whiteline instructions on how to install the front and rear (adjustable) sways on a 33 GTST? Mine didn't seem to come with any!

Thanks..

Pictures of a front and rear Whiteline adjustable stabiliser bar install are on the Stagea Suspension thread.

:) cheers :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      Rust repairs completed, doors back on! pretty much totally back together running now. All future repairs will be fiddly wiring getting everything back up to road condition.  hasn’t  taken that long considering the condition I got the sub. note my helpers keeping the back seat warm 😂
    • Keeper
      SAU NSW - Old Pac Cruise to Newcastle All Japan Day 2025

      By Keeper · Posted

      SAU NSW Old Pac Cruise to Newcastle All Japan Day 2025 Sunday 27th July 2025 5:00AM Meeting Berowra Station Commuter Car Park 2 5:15AM Departure Cruise Via Old Pacific Hwy 7:45AM Arrival to Lambton Pool (Regroup) 8:00AM Arrival to Newcastle All Japan Day 2025 Meet Location: Berowra Station Commuter Car Park 2 Stop 1: Lambton Pool (Carpark) Final Destination: McDonald Jones Stadium for Newcastle All Japan Day 2025 Tickets: Newcastle All Japan Day 2025 $20 Per Car Spectators Free PURCHASE TICKETS HERE *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Keeper
      SAU NSW - Machines & Macchiatos Cars and Coffee

      By Keeper · Posted

      SAU NSW Attends Machines & Macchiatos Cars and Coffee Sunday 13th July 2025 7:00AM Meeting Davidson Park 7:20AM Departure 7:45AM Arrival at Northern Beaches Christian School Meet Location: Davidson Park Final Destination: Northern Beaches Christian School Machines & Macchiatos Tickets: $10 Per Car $2 Spectators Pay at Gate LIMITED SPACES Register Below to Reserve your Spot. Members Receive Preference REGISTER HERE   *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Ozdavroz
      Starting again

      By Ozdavroz · Posted

      Thanks heaps Duncan and GTSBoy. I'll get my old man to sit in the driver's seat and turn it on and off while I test with the meter. Or maybe other way round, depending on whether he remembers where his glasses got to
    • GTSBoy
      Starting again

      By GTSBoy · Posted

      This is the GTR fuel pump. Yellow shows 12V, orange shows earth. The ECU provides the earth to activate the fuel pump relay. The ECU side of teh relay will pull low when the ECU activates. This is the RB20 fuel pump. Almost the same, but a little simpler. You can see I indicated (above) where the 12V line goes down to the RB20 diagram on the overall diagram, whch shows both RB26 and RB20. This is where I show it coming in on the RB20 diagram below. You can see that the dropping resistor is handled differently. When the fuel pump control is not providing earth to the pump, the pump earths through the dropping resistor and thus runs at lower voltage (some is wasted over the resistor) and runs slower. I showed that "not 12V and not quite earth" portion of the wiring in a paler orange. The rest of the wiring that I did not colour on that little section below the pump would be orange when the fuel pump coontroller is providing earth. This drop is handled inside the fuel pump controller in the GTR. Regardless, you can see where 12V is supposed to be, where earth is supposed to be. The key on prime is via the ECU providing the pump for only a few seconds the switching off. You should be able to see that happen.
×
×
  • Create New...