Jump to content
SAU Community

Recommended Posts

1989 - R32 GTR (RB26DETT)

1993 - R33 GTST (RB25DET)

1995 - R33 GTR (RB26DETT)

1998 - R34 GTT (RB25DET)

1998 - R34 GTR (RB26DETT)

It's refinement sure, but it's all fundamentally the same engine technology over 15 years - even more if you go back to the RB30E.

Where did all the money go, surely it doesn't send a company broke to refine existing technology?

Link to comment
https://www.sau.com.au/forums/topic/63177-nissan-where-did-the-money-go/
Share on other sites

surely it doesn't send a company broke to refine existing technology

You've got ro remember the whole reason a company exists...to make money, customer satisfaction is only a concern if you're not making any :) Why spend profits if you don't need to.

Remember Nissan were basically broke.

What they should have done with the new Skyline is keep the nice nissan RB, use a 3.5ltr inline six oversquare. Keep the R34 styling and slowly shape it in to a Diablo style supercar. :)

I don't like their new french styling.

Hmm, OK it looks like most people either don't realise that Nissan nearly went broke and got taken over by Renault, or they don't have thoughts as to why Nissan went broke when they obviously didn't spend the money on R&D given that the technology didn't change much.

slow13dude.. i think you will find *why* they didn't revise things majorly over that time is that they didn't *have to*.. Why change something just for the sake of it? If there engines were doing well, and were being manufactured to cost, and being carried across a number of different models. Why spend a heap of R&D developing new engines at that time? when the money could be spent on body and chasis design, marketing, and whatever else.

I think you will find most other companies at the time have gone with similar methodology - come up with a core design that fundementally works well, and overtime revise that basic design with extra little features and extras to improve it.

If you think about it, they stacked up just as good as anything else to come from any other stable in a fairly "common" production level car over all that time. Hell, Holden, (and quite a few other companies worldwide) have only just caught up to the wows of DOHC and everything else which nissan had in their engines in the mid-80's.

keeping an engine basically the same means it would be easily fixable and common to work on.

those late 80's, early 90's were a bad time for japan with one of the worst times economically... hurt everyone :)

I heard from alot of different places that development of the R32 GTR cost ALOT of money, and was the start of their financial problems, then with the subsequent end to the japanese supercar era and the japanese currency falling it was out of their hands./

Guys, Nissan had the RB series engine lifespan planned from the very beginning... they were always going to have the total R+D lifespan pegged at 20 - 25 years. Nissan didn't just suddenly say "geez we're in the sh*t financially after 40 years of building straight 6's, lets build V6's from now on", rather it's a technological, packaging AND financial move. The RB series engines were the best straight 6's in Japan and no other manufacturers really tried to compete at the same level as Nissan.... but where were they gonna go from there?

During the Bubble economy years in Japan, there was serious talk that Japan was going to 'take over the world' financially, so the vibe within Nissan, Japans flagship car manufacturer, was very much a reflection of that: 'let's build the best racing straight 6 in the world and call it the RB26DETT'. So they did. Why the RB26 wasn't changed much over 10 years is pretty much testimony to how good the original design was.

But that was then, now is now, so goodbye RB26... :D

Don't blame the skyline for nissan's woes, remember they made other models as well.

And I might add other models that were clangers. The skyline series very likely [being a steady seller and sort after model] probably was not the culprit and may even have kept the company afloat for longer than it would've been [if they didn't make skylines].

[[sombody in the know here may be able to provide facts to this theory, I don't have them, just pointing out some broader issues.]]

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I just changed the timing belt on my RB25DET NEO and wanted to get some opinions. I’ve been super cautious, did a lot of research, and took my time. I’ve driven the car, and it runs fine. After warming it up, I revved it to 8000 RPM a few times—no issues, everything held up.   After the drive, I heard a noise that I think is either the clutch or possibly a tight accessory belt. It’s not constant, just comes and goes.   I took the timing cover off to double-check everything:   Belt is on properly, Tensioner is tight, Did the 90-degree twist test—belt isn’t too tight or too loose.     What still worries me is that I noticed the belt seems to sit a little toward the front edge of the gears, especially on the idler pulley. It even looks like it’s slightly coming off the edge there. Is that normal?   My old belt (5 years old, ~3,000 miles) also showed a bit of wear on that same edge, so maybe it’s just how it sits? I’m probably overthinking this, but since it’s my first time doing this on a NEO and the engine is forged, I really don’t want to mess anything up.   Also, I’m thinking of swapping to a clear front timing cover with the glass window. Would you recommend NITO or HPI? HPI looks reputable and their covers have 2.5mm thickness, but not sure if there’s a real difference between the two.   Any advice or reassurance would be much appreciated!
    • 40 grit sounds about right, to start. You make some decent cuts/damage in the coating with that, then rapdily scale up to maybe 80 and 120 for the bulk of the actual removal, then fine it off to 180 or 240 perhaps. No need to go any finer than that, and maybe no need to go even as fine as that. Wrap it on a big block and have at it. At least on the hub face.
    • Do the GKTech rear lower control arm mount relocation, and either alloy subframe inserts or very stiff subframe bushes. Traction is going to be at a premium!
    • Hello,   My name if Frederick, i'm 30 years old and I live in Belgium, Europe! I used to have a Nissan 370z daily but since I got a company car I turned that into my seattime driftcar. About 3 years ago I also wanted something older with more feel, so I got an R32 GTST with an rb26 engine. I am now getting the rb built to have around 800hp and it's close to being finished. I'm very excited for how it will drive and how driveable it will be! Regards, Fred!
    • Appreciate the insight! Talked to some local folks and they basically told me "it's not that deep." As long as the threading on the inside matches what's at the steering rack, everything else can be constructed-to-fit. There are full aftermarket kits I can use - probably better for my car overall since it's lowered.  Example: GKTech M14 Super Adjustable Inner Tie Rod Set - Nissan Skyline R32 R33 R33, 240SX, 300ZX, 350Z / Infiniti G35 M14I-TROD-2 gktM145-TROD gktM14I-TROD - Concept Z Performance (These can be packaged with their "high misalignment" tie rod ends).
×
×
  • Create New...